Operation Manual

ManualsBrandsYamaha ManualsSynthesizersH11

H11 Version 1.10 New Functions

H11 Version 1.10

New Functions

For USB Wireless LAN adapter Users

Yamaha has updated the firmware of the H11 from Version 1.00 to Version 1.10. This

version provides an additional, push-button method for WPS setup for making

Internet settings, and WPA and WPA2 security formats.

Please refer to the chapter “Internet Direct Connection” on page 33 in your owner’s

manual, along with this manual.

NOTE

For details on how to check the version for the instrument you are using, refer to the chapter “Checking the version

number” on page 16 in your owner’s manual.

NOTE

For details on how to update, visit the following URL:

http://services.music.yamaha.com/radio/connect.html

 Added method for making Internet Settings

Since a push-button method for WPS setup has been added, wireless network

settings can easily be made.

 Enhanced security

The instrument now includes settings for the robust WPA and WPA2 security formats

(types listed below), which are stronger than those conventionally adopted for WEP.

WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (TKIP), WPA2-PSK (AES)

NOTE

Concerning the WPA and WPA2 security formats, if you are not using the push-button method for WPS setup, visit the

following URL:

http://services.music.yamaha.com/radio/connect.html

NOTE

Some USB Wireless LAN adaptors do not support the push-button method for WPS setup, or the WPA and WPA2 security

formats. For a list of USB Wireless LAN adaptors whose compatibility have been confirmed by Yamaha, visit the Yamaha

website:

http://download.yamaha.com/

NOTE

To configure the setting for the Wireless LAN using the push-button method for WPS setup, the access point must support

that method. For details about checking or changing the settings of the access point, refer to the owner’s manual of the

access point (the Wireless LAN router) you are using.

NOTE

The H11 does not support the PIN method.

Summary of content (4 pages)

PAGE 1
H11 Version 1.10 New Functions For USB Wireless LAN adapter Users Yamaha has updated the firmware of the H11 from Version 1.00 to Version 1.10. This version provides an additional, push-button method for WPS setup for making Internet settings, and WPA and WPA2 security formats. Please refer to the chapter “Internet Direct Connection” on page 33 in your owner’s manual, along with this manual.
PAGE 2
Setting the push-button method for WPS setup Operation If the access point (the Wireless LAN router) you are using is compatible with the pushbutton method for WPS setup, the settings for the wireless network can be automatically made. 1 2 Connect a USB Wireless LAN adapter to a USB terminal on the instrument. NOTE Hold down the [BGM] button and press the [+/YES] button then, engage the Load mode. NOTE The indication “Lod” appears in the display.
PAGE 3
4 Press the [PLAY] button to execute the setting using the push-button method for WPS setup. The indication “---” appears in the display. 5 Press the WPS button of the access point you are using within two minutes of executing step 4 above. The settings for SSID, channel, security and key are automatically configured. The process of settings using the push-button method for WPS setup is executed and then an “End” message will appear on the display.
PAGE 4
About Using BSD-Licensed Software The software used by this product includes components that comply with the BSD license. The restrictions placed on users of software released under a typical BSD license are that if they redistribute such software in any form, with or without modification, they must include in the redistribution (1) a disclaimer of liability, (2) the original copyright notice and (3) a list of licensing provisions.