User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Introduction
- Included Accessories
- About this Manual
- Contents
- Component Names
- Setting Up
- Screen Configuration and Basic Operation
- Producing Reference Tones for Playing Harmony (Voice, Temperament, Hold, Octave, Transpose)
- Demonstrating Tempo and Rhythm (Metronome, Rhythm Style)
- Sharing Performances (Recording/Playback)
- Enhancing Basic Practice (Sound Back, Training)
- Restoring Factory Settings
- Advanced Settings (Settings)
- Connecting External Devices
- Connecting Amplifiers or Other Equipment (OUTPUT [L/MONO], [R] jacks)
- Connecting a Microphone (MIC [INPUT] jack, MIC [GAIN] knob)
- Using a Pedal ([FOOT PEDAL] jack)
- Connecting a USB Flash Drive (USB [TO DEVICE] terminal)
- Connecting to a Computer (USB [TO HOST] terminal)
- Using the “HD-300 Assistant” iPhone/iPad App (Bluetooth)
- Listening on the HD-300 to Audio Playback from an iPhone/ iPad (Bluetooth)
- Appendix
HD-300 Owner’s Manual
32
Connecting Amplifiers or Other Equipment (OUTPUT [L/MONO],
[R] jacks)
Connect a speaker with an internal amplifier to the OUTPUT jack.
For mono sound, only connect the [L/MONO] jack. For stereo sound, connect both the [L/MONO] jack and the [R] jack.
When an external device is connected, sound will no longer be produced by the instrument’s speakers.
CAUTION
Make sure to turn off all devices when connecting external devices. Additionally, reduce the volume of each device to the
minimum before turning the power on or off. Failure to do so may cause electric shock or damage the device.
NOTICE
When outputting sound from the instrument to an external device, first turn on the power to the instrument, and then turn the
external device on. When turning the power off, follow the procedure in reverse order. Failure to do so may damage the device.
Connecting a Microphone (MIC [INPUT] jack, MIC [GAIN] knob)
Connect a commercially available external microphone to the MIC [INPUT] jack.
Use a microphone with a stereo mini phone jack and plug-in power compatibility.
Connecting an external microphone will automatically disable the internal microphone.
NOTE
When an external microphone is connected, the MIC [GAIN] knob controls the volume of the external microphone.
Connecting External Devices
Standard phone plug
Stereo mini phone plug