User Manual

16
Using the Revolabs HD Control Panel Software
A software program with graphical user interface is available for accessing
control settings and real-time status of Revolabs HD Microphone Systems. A
detailed description of how to use this tool is described below.
1. Download the Revolabs HD Control Panel software from
https://uc.yamaha.com/resources/support/
2. Connect the PC to the HD Venue system via USB.
3. Allow the PC to recognize the hardware and install the necessary drivers.
4. Install the software downloaded in Step 1, which requires Windows 2000,
NT, Vista, or 7.
5. Launch the Revolabs HD Control Panel program.
Configuration Settings
The Revolabs HD Control Panel controls most of the HD Venue Base Station
configuration settings. It also provides real time status of the microphones.
Only one HD Venue system can be controlled and monitored from a single PC
at any given time.
Mics Unmute at Startup:
By default the mics go into a muted state when they are removed from the
charger. This is done to prevent handling noise as the microphone is placed
into position. By selecting ‘Mics Unmuted at Startup’, the mics will go into an
unmuted state when removed from the charger.