User Manual

Version:

This provides the current firmware version for the microphone that is paired to

each channel.

Note: The microphone firmware version must match the Base firmware version

for the system to function properly. A mismatch may result in no audio from the

microphones.

Battery:

This provides the current battery level for the microphone that is paired to each

channel and active. The value changes in 12.5% increments and represents the

bottom of the range the battery is in. Therefore a value of 87% means that the

battery level is between 87%-100%.

Pairing:

This provides the ability to activate pairing mode for the respective base station

channel. It also provides the pairing status of any base station channel already

in pairing mode.

Firmware:

This window provides the current firmware versions found in the Base Station

and microphones as well as provides the HD Firmware Loader for loading the

firmware to the base station and microphones.

DIP Switches:

This displays the current state of the base station DIP switches. When a DIP

switch is in the ‘OFF’ position the DIP function will remain “greyed out”. When

a DIP switch is in the ‘ON’ position, the functionality of that DIP switch will

change to BLACK to indicated that the feature is active.