User Manual

Using the HD Wireless Adapter for Countryman Microphone

The HD Wireless Adapter for Countryman Microphones, shown in the following

figure, is connects to a Countryman microphones for wireless freedom for

broadcasting applications with no bulky equipment, such as a belt pack or

batteries.

1. Audio Out port — accepts the 2.5mm plug for the earpiece.

2. Charging Port — docks to all Revolabs HD Charger Bases.

3. Mute button — press to mute, un-mute and pair microphone.

4. LED display — visual status for mute, un-mute, and pairing.

5. TA4F connector — connects to Countryman microphone cable.

To use the HD Wireless Adapter for Countryman Microphone:

4. Remove the Microphone Adapter from the Charger Base.

The adapter turns on and mutes automatically when removed from Charger

Base (flashing RED LED). The Microphone Adapter is attached to a

Countryman Microphone with the specific cable designed for Revolabs. The

HD Wireless Adapter for Countryman microphone supplies the necessary

phantom power specifically for the Countryman microphone.

5. To turn the Adapter off, return the microphone unit to the Charger Base or

press and hold the Mute button for ~10 seconds until the LED turns solid

RED then release button.

Important: Always remove the microphone from the Adapter and separate

the parts before returning the Adapter to the Charger Base.

If the Adapter is moved too far from the Base Station (~300 feet or 90 meters)

the connection will be dropped (LED flashes all colors) and the audio will mute.