User Manual

Usi
ng the Rear Panel Configuration DIP Switches
DIP
Switch
Feature Off (Default) On
1 Output Mixing
Individual
Outputs
Mixed Output
2 Low Pass Filter No LPF LPF
3
Audio Output
Level
Line Level Mic Level
4 Mute Mode
Individual
Mutes
No Mutes
Flat
High
boost
Bass
Boost
Dynamic
5
Microphone EQ
Off
On Off On
6 Off Off On On
150' 100' 50’ 15'
7
Transmit Power
Off
On Off On
8 Off Off On On
Configuration Settings
DIP Switch 1- Output Mixing:
When DIP Switch 1 is OFF(default), each HD microphone has its own 3.5mm balanced audio output
on the Base Station. When DIP Switch 1 is switched on, the audio outputs of the two HD
microphones are mixed together and sent to both outputs.
DIP Switch 2 - Low Pass Filter:
When DIP switch 2 is OFF(default) the microphone provides the full audio bandwidth. When DIP
switch 2 is ON, a LPF is activated reducing the audio bandwidth.
DIP Switch 3 – Audio Output Level:
When DIP switch 3 is OFF(default) the microphone outputs provide a line level signal~0 dBu. When
DIP switch 3 is ON, the microphone outputs provide a mic level signal ~-40 dBu.
DIP Switch 4 - Mute Mode:
When DIP switch 4 is OFF(default) each microphone has its own individual muting capabilities. When
DIP switch 4 is ON, the microphone mute buttons are deactivated resulting in the mics always being
active and un-muted when not in the Charger Base.
11