User Manual

11
Check the tone reector position
As slippage in the tone reflector position can affect the
instrument’s intonation, its position should be checked pe-
riodically.
How to check the tone reector position
Using the supplied cleaning rod accessory, insert it into the
headjoint and make sure that the line on the cleaning rod is
centered in the embouchure hole.
NOTE
* When adjusting the tone reflector position Adjusting the
tone reflector’s position requires high skill and should be
done by your local dealer from whom you purchased the
instrument.
* If the head cap is loose, turn it until it is suciently tight.
Do not over-tighten the head cap, as it may cause the posi
-
tion of the reector to move.
Piccolo
Alto Flute
Flute
Bass Flute
Tone reector Cleaning rod
7.5mm
Tone reector Cleaning rod
26mm
Tone reector Cleaning rod
17mm
Tone reector Cleaning rod
40mm
Line on the cleaning rod
piccolo_flute_en_om_b0_1224.indd 11 2021/01/07 13:01:11