User Manual

17 En
Connecting to a network
English
PREPARATION
7 Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (S/T) to select a character and
the cursor keys (W/X) to move the edit position.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
8 Use the cursor keys (
S
/
T
) to select
“Security” and press ENTER.
9 Use the cursor keys (
W
/
X
) to select desired
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
Note
If you select “None”, the connection may be insecure since the
communication is not encrypted.
10 Use the cursor keys (
S
/
T
) to select
“Security Key” and press ENTER.
11 Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
If you select “WEP” in Step 9, enter either 5 or 13
character string, or 10 or 26 hexadecimal digits.
If you select “WPA2-PSK (AES)” or “Mixed Mode”
in Step 10, enter either 8 to 63 character string or 64
hexadecimal digits.
Use the remote control keys as described in Step 7 to
enter the key.
12 Use the cursor keys (
S
/
T
) to select
“Connect [ENT]” and press ENTER to save
the setting.
If the unit does not connect, check the SSID and
security key on the wireless router (access point) and
repeat from Step 6.
Verify whether the unit is connected to a wireless
network (p. 18).
13 To exit from the menu, press SETUP.
Connecting a mobile device to the
unit directly (Wireless Direct)
Using Wireless Direct, this unit can operate as a wireless
network access point that mobile devices can directly
connect to.
Note
You will not be able to connect your mobile device or this unit to
the Internet while Wireless Direct is in use. For this reason,
Internet-based services such as Internet radio will be unavailable.
1 Press SETUP.
2 Use the cursor keys (
S
/
T
) to select
“Network” and press ENTER.
Note
To return to the previous state, press RETURN.
3 Use the cursor keys (
S
/
T
) to select
“Connection” and press ENTER.
4 Use the cursor keys (
S
/
T
) to select
“W.Direct” and press ENTER.
5 Press ENTER to display the SSID for this
unit, and press RETURN to previous state.
6 Use the cursor keys (
S
/
T
) to select
“Security” and press ENTER.
¡WPA2-PSK(AES)
SECURITY
KEY
MUTE NOW PLAYING
RETURN
OPTION
VOLUME
CLEAR MODE DISPLAY
ENTER
HOME
SETUP
ENTER
RETURN
SETUP
Cursor keys
¡SSID
W.DIRECT
¡WPA2-PSK(AES)
W.DIRECT