User Manual

7
VIBRATO SYSTEM Locking Type (part 2)
Intonation Adjustment in Vibrato Bridge
1) Loosen the hexagonal screw located in front of each saddle
using the supplied hexagonal wrench. (illustration — D)
2) Slide the saddles by hand to adjust the length of each
string.
3) When the intonation is correct, tighten the hexagonal screw
in front of each saddle to ensure that its position stays sta-
tionary. (illustration — D)
C
B
D
When Higher
than harmonic
Loosen
Tighten
Lower
When Lower
than harmonic
Loosen
Tighten
Higher
01_e_g_om_en.indd 701_e_g_om_en.indd 7 09.3.13 9:41:41 AM09.3.13 9:41:41 AM