User Manual

English
4En
SPEAKERS
L
R
++––
SPEAKERS
L
R
++– –
A
B
When using a banana plug
1
Tightentheterminalknob.
2 Simplyinsertthebananaplugintotheterminal.
Remove the jumper
cables before connecting.
Toconnectthespeakertothe
outputterminalsoftheamplier,
twopairsofcablesforeachofthe
wooferandthetweeter/mid-range
areusedinsteadofstandardcon-
nections.Thistypeofconnection
decreasesthemodulationdistortion
causedbyelectricresistanceof
thecablesanddrivingcurrentof
thespeakers.Consequently,purer
soundqualitycanbeexpected.
Toutilizebi-wiredconnections,
removethejumpercablesfromthe
terminalsrst,andthenconnectthe
wooferandthetweeter/mid-range
totheamplierseparatelyusing
twopairsofcables.
<Bi-wired connections>
Remove the jumper
cables before connecting.
Amplier
Woofer terminals
Tweeter/Mid-range
terminals
Amplier
NS-F901 (L)
NS-F901 (R)
NS-F901 (L)
NS-F901 (R)
BothSPEAKERS AandB
shouldbeselected.
Black (–)
Red (+)
Jumper
cable
When your amplier has only one
set of speaker output terminals.
When your amplier has two sets
of speaker output terminals.
1
2
Banana plug