User Manual
Table Of Contents
- PRECAUTIONS
- NOTICE
- Information
- Included Accessories
- About the Manuals
- Table of Contents
- Features
- Introduction
- Main Operations
- Enjoying the Piano Performance
- Playing Various Musical Instrument Sounds (Voices)
- Playing the Keyboard along with Rhythm Playback
- Playing Back Songs
- Recording Your Performance
- Handling Song Files
- Connections
- Connectors
- Connecting to an Audio Player ([AUX IN] jack)
- Using an External Speaker System for Playback (AUX OUT [L/L+R]/[R] jacks)
- Connecting USB Devices (USB [TO DEVICE] Terminal)
- Connecting External MIDI Devices (MIDI Terminals)
- Connecting to a Computer (USB [TO HOST] Terminal)
- Connecting to a Smart Device
- Using a Smart Device App
- Detailed Settings (Menu Display)
- Appendix
Assembling the Clavinova
127
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
2. Attach the three legs and three leg
beams.
Refer to the diagram below to verify the
orientation of the legs.
2-1. Install and tighten four screws on each leg,
starting with one of the front legs.
2-2. Slide the leg beams over the legs, and attach
them to each of the legs using four thin
screws (4 × 10 mm).
Make sure that the gradually inclined side of the
leg beams faces the inside of the unit as shown.
3. Attach the lyre braces.
3-1. Attach the lyre braces using the four thin
screws (4 × 16 mm).
4. Raise the unit to the standing
position.
Use the front legs as support to raise the unit.
Rear leg
Front leg
Front leg
6 × 40 mm fixing screws
4 × 10 mm
thin screws
The gradually
inclined side
faces the inside.
3-1
4 × 16 mm
thin screws