User Manual

PSR-E373, PSR-EW310, YPT-370 Owner’s Manual
50
Reference
Using with a Computer or Smart Device
Connecting the [USB TO HOST] terminal of this
instrument and the computer via a USB cable allows
you to do the following.
 When Storage Mode (Function 056; page 55)
is set to on.
• File transfer (Song, Style, Backup)
 When Storage Mode is set to off.
• Performance data communication by MIDI
• Audio data communication by USB
Simply by connecting the instrument and a computer
via a USB cable, the instrument is recognized by the
computer. However, a dedicated driver must be
installed for audio data communication. For details,
refer to “Computer-related Operations” on the web-
site (page 8).
By connecting a smart device such as an iPhone/
iPad to the instrument, you can take advantage of
various functions. For details on connections, refer to
the online PDF manual (page 8) “Smart Device Con-
nection Manual.” For information about the compati-
ble smart devices and application tools, access the
following page:
https://www.yamaha.com/kbdapps/
Connecting to a computer
• The volume for USB audio communication data cannot be
adjusted with the [MASTER VOLUME] dial.
• While Storage Mode is set to on, you cannot play the instru-
ment. Set Storage Mode to on, only when transmitting/receiv-
ing files to/from a computer.
• While Storage Mode is set to off, not only your keyboard per-
formance data but also automatic performance data (Style
and User Song) are transmitted to the computer via MIDI.
• If you are using with a music production application, such as
a DAW (Digital Audio Workstation), set “Loopback” (Function
042; page 54) to off. If this is instead set to on, a mix of the
audio data and the sound of the instrument is sent to DAW,
which may cause howling and unexpected loud sounds.
USB cable
USB
terminal
instrumentcomputer
[USB TO HOST]
terminal
NOTE
File transfer when Storage Mode is set to on
Operation method
Operate on a computer. Refer to “Computer-related
Operations” on the website (page 8).
Files that can be transferred
• Song files (Extension: .MID)
Song files created on other instruments or computers
can be transferred to this instrument. Note that user
songs created with this instrument cannot be trans-
ferred to a computer as a single file.
• Style files (Extension: .STY)
This instrument does not have a function for creating
Style files, but you can import a style file created on
another device. The maximum capacity per file is
50KB. Files that exceed the limit will not be recognized
on this instrument.
• Backup files (Extension: .BUP)
* You can transfer the data of “Parameters backed up as
needed” (excluding “Passing Status of Keys to Suc-
cess”) and “Parameters backed up when the power is
turned off” on page 51 to the computer and save the
data as a single backup file.
Connecting a Smart Device
• If you are using the instrument with a music production appli-
cation such as a DAW (Digital Audio Workstation), set “Loop-
back” (Function 042; page 54) to off. If it is set to on, a mix of
the audio data and the sound of the instrument is sent to DAW,
which may cause howling and unexpected loud sounds.
• Files up to a total of about 1.4 MB can be transferred to
this instrument.
• If you transfer a Style file to this instrument, you need to
register it before using it on the instrument. For details,
refer to “Registering a Style File” (page 29).
• Files transferred to the instrument are listed in the instru-
ment in the order of symbol, number and alphabet.
NOTE
NOTE