Specification Sheet

Technical Data Sheet
4 / 4
Powered Studio Monitor HS8/HS8I
*All information subject to change without notice.
*All trademarks and registered trademarks are property of their respective owners.
Created in March, 2017
Architectural and Engineering Specifications
The Yamaha HS8 and HS8I Powered Studio Monitors shall be two-way bass-reflex type monitor speakers with an 8" cone driver for the low
frequencies and a 1" dome driver for the high frequencies. The monitor speakers shall have built-in bi-amplified power with class-D amplifiers
(120 watts total dynamic power), and shall include HIGH TRIM and ROOM CONTROL response controls. The amplifier section of the monitor
speaker shall be cooled by natural convection.
The HS8 and HS8I Powered Studio Monitors shall meet the following performance criteria: Frequency response shall be 38 Hz to 30 kHz at
10 dB below rated sensitivity, and the frequency dividing network shall have a crossover frequency of 2 kHz.
The monitor speaker shall have one XLR3-31 connector and one phone jack for input. The cabinet shall be constructed of MDF. The HS8I model
shall additionally provide mounting points on four surfaces. Dimensions shall be 250 (W) x 390 (H) x 334 (D) mm. Weight shall be no more than
10.2 kg (HS8)/10.7 kg (HS8I).