manual

En 11
CONNECTIONS
Connecting speakers
■ Connecting speakers / a subwoofer
1
Remove approximately 10mm of insulation from the
ends of the speaker cables, and twist the bare wires
of the cables together firmly so that they will not
cause short circuits.
2
Press the tab on the speaker terminal down.
3
Insert the speaker cable end into the terminal.
4
Lift the tab to fix the speaker cable in place.
■ Connecting an active subwoofer
1
Connect the subwoofer input jack to the
SUBWOOFER jack on this unit with an audio pin
cable.
2
Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
CENTER
FRONT
SPEAKERS
SUB
WOOFER
SURROUND
4
1
2
2
4
3
3
Connect to a subwoofer jack as follows when using an active
subwoofer.
VOLUME
MIN MAX
CROSSOVER/
HIGH CUT
MIN MAX
Subwoofer examples