manual

En 31
SETUP
Configuring the settings specific for each input source (Option menu)
■ Adjusting volume between input sources
Input source: All
Reduces any change in volume when switching between input
sources by correcting volume differences in each input source. You
can adjust this parameter for each input source.
■ Combining HDMI input source video and
audio
Input source: HDMI 1-3
Combines video from HDMI input sources with analog/digital
audio inputs in situations such as:
– an external device is connected with an HDMI cable but cannot
transmit audio through HDMI
To change assignments, select an input source (HDMI 1-3) as the
video input first, and then select audio input jacks in this menu.
Set as follows according on the desired combination of audio input
jacks.
■ Displaying information on audio/video
signals
Input source: HDMI 1-3, AUDIO 1-4 J1
Displays information on digital audio and video signals on the
front panel display. You can display the signal information by
pressing iENTER on the menu item and using iCursor B / C.
Audio information
Video information
Volume Trim
Adjustable range -6.0 dB to 0.0 dB to +6.0 dB
Default setting 0.0 dB
Adjustment
increments
0.5 dB steps
Audio In
SW
C
L
SL SR
R
Audio;;;AUDIO1
HDMI1
VOL.
Assignable audio input jacks
Inputs that change the audio source
Audio inputs Settings method
Optical digital audio
input
Select AUDIO 1 or AUDIO 4. Connect the external
component audio cable to the optical jack for the
selected input.
Coaxial digital audio
input
Select AUDIO 2 or AUDIO 3. Connect the external
component audio cable to the coaxial jack for the
selected input.
Analog audio input Select AUDIO 5 or AUDIO 6. Connect the external
component audio cable to the audio jack for the
selected input.
• For details of settings, refer to “Receiving audio from other input
sources” (☞
p. 15).
• To return audio inputs to their previous settings, display this item
again, and select the original input jack.
Signal Info
SW
C
L
SL SR
R
DolbyD
FORMAT
VOL.
Menu item
Information
FORMAT Format of audio signals.
CHAN The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
SAMPL The sampling frequency of analog-to-digital
conversion.
B RATE The bit rate of input signal per second.
V IN Format and resolution of video input signal.
V OUT Format and resolution of video output signal.
V.MSG
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error HDCP authentication failed.
Device Over The number of connected HDMI
components is over the limit.
• “No Signal” is displayed when no signals are being received, and
“---” is displayed if this unit cannot recognize the incoming
signal.
• The bit rate may vary during playback.
J
1 : AUDIO 5-6 are also available when the “Audio Return Channel” function is on,
and the source is used for the TV audio input (TVAudio).