Owner’s Manual
CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 48
Function
Configures the functions that make the unit easier to use.
• Default settings are underlined.
■ Input Rename
Changes the input source name displayed on the front display.
Input sources
HDMI 1–4, AUDIO 1–5
■ Procedure
1
Use the cursor keys (q/w) to select an input source to be renamed and press
ENTER.
• To select a name from the presets, use the cursor keys (q/w) to select an input source and the
cursor keys (e/r) to select a preset name.
2
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a character.
3
To confirm the new name, press ENTER.
• To cancel the entry, press RETURN.
4
To change another input source name, repeat steps 1 to 3.
5
To exit from the menu, press SETUP.
■ Dimmer
Adjusts the brightness of the front display.
Setting range
-4 to 0
(higher to brighten)
• The front display may become dark when “ECO Mode” (p.47) is set to “On”.
■ Memory Guard
Prevents accidental changes to the settings.
Settings
• When “Memory Guard” is set to “On”, the following icon ( ) is displayed on the menu screen.
Input Rename
Blu-ray
HDMI1
OK:ENTER
CANCEL:RETURN
Off Does not protect the settings.
On Protects the settings until “Off” is selected.
Memory Guard
Memory Guard On
Back:RETURN
Icon
00_HTR-2067_om_En.book Page 48 Monday, January 27, 2014 9:33 AM