Owner’s Manual
Changing the FM tuning frequency setting (TU)
(Asia and General models only)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRT UAL
TU••••••••FM50
Change the FM tuning frequency setting of the unit depending on your country or
region.
Settings
FM100 Select this when you want to adjust the FM frequency by 100-kHz steps.
FM50 Select this when you want to adjust the FM frequency by 50-kHz steps.
Switching the video signal type (TV FORMAT)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRT UAL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
Canada and General models: NTSC
Other models: PAL
Selecting the HDMI 4K signal format (4K MODE)
ENHANCER
LINK
ECO
MASTER
OUT
2
-
R
es
Hi
YPAO
VOL.
A
-
DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B2 A
VOL .
FPR
SL
SW
SR
SBL SB SBR
FPL
MUT E VIRT UAL
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
Settings
MODE 1
Inputs/outputs 4K signals shown in the table below. Depending on the
connected device or HDMI cables, video may not be displayed correctly.
In this case, select “MODE 2”.
MODE 2 Inputs/outputs 4K signals shown in the table below.
Note
When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit 12 bit
4K/60, 50 Hz
RGB 4:4:4
4
– –
YCbCr 4:4:4
4
– –
YCbCr 4:2:2
4
–
YCbCr 4:2:0
4 4
–
4K/30, 25, 24 Hz
RGB 4:4:4
4 4
–
YCbCr 4:4:4
4 4
–
YCbCr 4:2:2
4 4
En
56