manual

En 40
SETUP
Setting various functions (Setup menu)
Setting the audio output function of this
unit
Sound Setup submenu
■ Synchronizing audio/video output
Adjusts the delay between audio and video output (Lipsync
function).
HDMI Auto
When connecting to a TV via HDMI, automatically adjusts output
timing if the TV supports an automatic lipsync function.
Auto
Fine-adjust the audio output timing by entering the correction time
provided when “HDMI Auto” is set to “On.”
Manual
Manually adjusts the correction time. Select this when the TV does
not support the automatic lipsync function or “HDMI Auto” is set
to “Off.”
■ Auto-adjusting the sound level to make
even low volumes more audible
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When you play audio at night or at
low volumes, it is a good idea to set parameter to “Auto.” J1
When the auto function is enabled, it adjusts the dynamic range as
follows.
Lipsync Adjusts the delay between video and audio output.
Adaptive DRC Auto-adjusting the sound level to make even low
volumes more audible.
D.Range Selects the dynamic range adjustment method for
digital audio playback.
Max Volume Sets the maximum volume for this receiver.
Init.Volume Sets the initial volume for when this receiver is turned
on.
HDMI Audio Out Selects audio signals received through the HDMI
input jack.
SW
C
L
SL SR
R
SoundSetup
SETUP
VOL .
Lipsync
Off (Default) Select this when the connected TV does not support
the automatic lipsync function or you do not wish to
use the automatic lipsync function. Set the correction
time in “Manual.”
On Select this when the TV supports the automatic
lipsync function. Fine-adjust the correction time in
“Auto.”
Adjustable range 0 ms to 240 ms
Adjustment
increments
1 ms
Adjustable range 0 ms to 240 ms
Adjustment
increments
1 ms
Default setting 0 ms
Adaptive DRC
Auto Adjusts the dynamic range automatically.
Off (Default) Does not adjust the dynamic range automatically.
Auto
Off
Auto
Off
Input Level Input Level
Volume: low Volume: high
Output Level Output Level
J
1 : The Adaptive DRC setting is also effective when you use headphones.