OYAMAHA Owner's Manual English
FM/AM tuni_g ................................................................. 34 Selecting a frequency for reception (Normal tuning) ..... 34 Registering and recalling a frequency (Preset tuning) _. 35 Recalling a [)reset station ................................................ 37 Clearing preset stations .................................................. 37 Radio Data System tuning (U.K. and Europe models only) ..................................... 37 PlayiR_g back tunes from yore" iDMrWiPhone :rt'_......
U • FM/AM tuner • Built-in high-quality, high-power 5-channel amplifier • 1-button input/sound field program switching (SCENE function) ....................... 29 • Speaker connections for 2- to 7.1-channel configurations - (U.S.A. and Canada models only) Speaker impedance configuration ..................................................... - Speaker channels and functions .................................................................................................................
iiii!i!iiiii iiii!i!iiiii About this manual • Attaching the VIDEO AUX input cover (supplied) To protect against dust, attach the supplied VIDE() AUK input cover to the VIDEO AUX jacks when you do not use the jacks. To remove the cover, push the left section of it. • Some features are not available in certain regions. • This manual is created prior to production. specifications Design and are subject to change in part as a result of improvements, etc.
® MEMORY Registers ® (!) (Power) Switches ® this unit between on and standby Through/iPod Lights rnode. up in any of the following • • Charge @ mode. indicator during the standby mode When an iPod is charging ® AM is enabled and audio/video fl'om with HDM[ is output to a TV ® TUNING <> Changes EM/AM during the standby mode iPod universal @ dock @ this the HDMI stays Control on during functions standby are "On" (rc_,.p. 55), then mode.
@ DOCK jack For connecting an optional Yamaha iPod universal dock (such as YDS-12) or Bluetooth wireless audio receiver (YBA-10) (_*p. 39, _). @ NDMI OUT jack @ For connecting an HDM[ - compatible TV to output audio/video signals (_). NDMIt-4 jacks (_) For connecting external components equipped with HDM[compatible outputs to receive audio/video signals (_). AVI-6 jacks For connecting to external components equipped with audio/video outputs to receive audio/video signals (_*p. 18, p. 19).
Front #ariel dis#lay @ HDMI indicator @ Lights up during normal HDM[ communication HDM[ 1-4 inputs are selected. CINEMA DSP indicator @ Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator @ Lights up when receiving an FM/AM broadcast. SLEEP indicator (_) (_) Cursor (_ Light up if corresponding cursors on the remote control are available for operations. Multi information display when any of the Lights up when the sleep timer is on (_).
Remote control [] [] Remote control signal transmitter Cursor A / v / <] / t>, ENTER, RETURN Transmits infrared signals. [] [] [] % [] Cursor/x TRANSMIT Lights up when a signal is output from the remote control. ENTER SOURCE _ (SOURCE Power) Switches an external component on and off, RETURN Returns [] External component Operate recording, components.
6 $ E Ti This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning connections in your listening environment. Speaker channels and Yunctl'ens I I The surround speakers are for effect and vocal sounds with the 5.1 channel speakers providing rear-area sounds. When used with 6.1/ 7.1 -channel (including surround back channel), sound for right and left rear-area is output.
iiiiiiiiiiii!i i iiii!i!iiiii iiii!i!iiiii • 5.1-channel speaker layout (5 speakers + subwoofer) Front speaker • 6.1-channel speaker layout (6 speakers + subwoofer) R Front speaker R Subwoofer Front speaker • 7.
gennecting speakers and subweefer Connect your speakers to their respective terminals on the rear panel. CAUTION • Remove the AC power cable of this unit flom the power outlet belore connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
(USA and Canada r+ode s ony} _""++_ ,+{},,wy Press STRAIGHT This unit is configured for 8(2 speakers as the factory setting. When connecting to 6'22speakers, carry out the following procedure to switch to 6'22. repeatedly to select a "6_2MIN." ++ Switch this unit to the standby mode, and then switch it on again. Connecting the banana plug (Except U.K., Europe, Asia and Korea models) Tighten the knob, and then insert the banana plug into the end of the terminal.
Connect the subwoofer input jack to the SUBWOOFER jack on this unit with an audio pin cable. Set the subwoofer volume as follows. Volume: Set to approximately halt volume (or slightly less than halt-). Crossover fiequency (if available): Subwoofer Set to maximum.
This unit is equipped components with the following that you are going input/output jacks. Use jacks and cables appropriate for to connect. Aud oiV deo iiscks OPTICAL jacks These jacks transmit optical digital audio signals. Use fiber-optic cables for optical digital audio signals. HDMI jacks Digital Digital video and digital Only use an HDMI sound are transmitted through audio fiber-optic cable COAXIAL jacks These jacks transmit coaxial digital audio signals.
Connectinga TVmom_tor ,,_o_ne_,_ _ 9 an H©Sq_ vdeo Connect This unit is equipped with the following HDMI OUT, COMPONENT signal format supported VIDEO three types of output jack for connection or VIDEO. Select the proper connection the HDMI cable to the HDMI me_" _{er OUT jack. to a TV. according to the input by your TV. HDMI OUT jack COMPONENT VIDEO (MONITOR OUT) HDMI input jacks • Use a 19-pin HDMI cable with the HDMI logo. • We recommend using a cable less than 5.
...... Connect t'_ O! the video pin cable to the VIDEO _,Jt (MONITOR When using other TVs To transmit sound from the TV to this unit. connect its AV 1-6 or AUDIO 1-2 jacks to the TV's audio output jacks. Depending on the connection on TV, connect the TV's audio output m the AV1-6 or AUDIO 1-2. OUT) jack. Video input Optical digital audio output Connect to the OPTICAL jack of the AV 1 or AV4 with a digital audio pin cable.
Connech g BD/DVDplayers and other devices This unit has the playback the following devices such input jacks.
I ©©nnect cabes _s<',;s / _+,,_ Connect the device with a component Using optical digital audio • Component connections to analog audio output devices video cable to one of the AV 1-2 input jacks. output Select the AVI input that the playback Component video / Audio output sources device is connected to for playback.
iiiiiiiiiiii!i i iiii!i!iiiii iiii!i!iiiii ,._,_O_ _ ec _ {_ B©i©V© p a)?e_s and ottse_ _de,/ce, ._,
,,_,_o_ _ e_A _ g C© p aye_s and ottse_ _ sudo <_@v c@8 a Using analog stereo output sources Select the audio input (AUDIO1-2) that the playback device is connected to for playback. Audio output Using coaxial digital output sources Select the AV input (AV2or AV3)that the playback device is connected to for playback. Audio (Coaxial) output CD player CD player Using optical digital output sources Select the AV input (AVl or AV4)that the playback device is connected to for playback.
iiiiiiiiiiii!i i Transm#tinginputAN to extema¢components Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, video game units, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external components through the AV OUT and AUDIO OUT jacks.
An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. Indoor FM antenna You can connect GND jack. Press and hold Connecting Insert either wire to the AM jack or the Release the AM loop antenna • Improving FM reception We recommend using an outdoor antenna.
This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed).
_f_ If necessary, press _iOPT_ON repeatedly and select the measuring acoustic characteristics in the "EQ Type" setting. During YPAO, the results of measuring characteristics equalizer) Press _2,_ _SETUP to start measurement. Press _ENTER measurement. Display during measurement the acoustic are used to set the equalizer (parametric to give a unified sound field. After setting, you can select the characteristics of the sound field in "EQ Type," as necessary.
When "E-5," "E-7," displayed: Check the content of the message from the "Error message" (_) to resolve the problem, and carry out the measurement process again. is Check thatmeasurement. the environment is suitable for accurate _ Error message(example) "E-8" or "E-9" @ Press _Cursor _ once to select "Retry." Press _ENTER to carry out YPAO again. When a wa _:_n!{}}_ message Check the content of the message from the "Warning message" (_) to resolve the problem.
ii!B_ iiiiiii' • Error message While measuring, take care not to touch the The YPAO microphone has been removed. NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. • When a warning message appears before measurement The unit was not able to Check that the left and find the front channel.
• Warning message The speakers displayed are connected with the Depending opposite display polarity. Depending on the type of speakers you are using and the environment in which you have them installed, this message may occur even if the speakers are connected correctly. on the type of speakers, "W-I" may even if the speakers are connected correctly. Check that the speaker polarity + (positive), and - (negative) are correct.
G P Turn on external components (TV, DVD player, etc.) connected to this unit. Turn this unit and select the input source usingon_[nput selector. The name of the selected input source is displayed for a few seconds. ;_ Refer to the instruction external component manuals provided corresponding operations, -10.0 dB to +10.0 dB set separately. headphones of the speakers Set the headphone or headphones tone control can be with the connected. 2.0 dB The display returns you release the key.
This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key. Four scenes are available for different uses, such as playing movies or music. The following input sources and sound field programs are provided as the initial factory settings. Registering input sourges/sound field program #_ Press the [8iSCENE key until "SET @ Complete" appears on the front panel display. Use @Input selector to select the input source you want to register.
iiiiiiii!iiii!i iiiiiiiiiiilB: Selects sound MOVIE category: field Press _MOVIE program: MUSIC category: Press repeatedly _MUS_C repeatedly Selects stereo reproduction: Press _STEREO repeatedly Selects compressed music enhancer: Press _STEREO repeatedly Selects surround Press _SUR. decoder: g->, Switches Direct mode (_). Press _DmRECT Sound field program mode: _ Use straight decoding mode when you want to playback sound without sound field processing.
ii:iliiii!iiii!i En oy n_ soursd fed p_o_?;_ams w t_sout su_x'ound sound This unit enjoy allows sound you field surround speakers can enjoy even minimal This to use surround configuration unit will automatically effects, (Virtual surround switch when virtual surround even CINEMA sound surround speakers without DSP presence of the front to Virtual speakers mode). with speakers CINEMA speakers to any You just a only. DSP mode are unavailable.
iiiiiiii!iiii!i Sound @ld programs This sound field is suitable reflection environment IC'NEMA'2_ in the table indicates the sound field program for CINEMA DSP. effects tones while maintaining _/tfss_ ,,,, E" and 3D feeling This program creates acoustic been designed surrounded a sound field emphasizing positioning with the concept by beautiful This program reproduces of multi-channel of an ideal movie theater, reverberations represents large, impressive sounds.
Suitable for listening to stereo sources. Use this program to mix down multi-channel sources signals are input, they are down mixed to 2-channels to 2-channels. When multi-channel and output from the front left and right speakers. Use this program sources, to output sound from all speakers. this unit down-mixes speakers.
iiiiiiiiiiiil;;iiiii iiiiiiii!iiii!i i!i : When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. % % ,TU.'! SelectiW a YrequencyYorreception (Normaltuning) Press _TUNER (Asia and General models only) The factory pre-set FM/AM tuner frequency steps are 9 kHz for AM and 50 kHz for FM to switch to the tuner input. Press _FIVl or _AIVi to select a band to receive.
iiii:ii!i!Si!iil;i ..... Use _TUNtNG receive. _ / _ to set a frequency to _TUNING % Increases the frequency. Press and hold this key for longer than a second to search automatically for a station on a higher frequency than the current one. _:;"'/ • When signal reception is poor When you are receiving an FM broadcast and cannot obtain a stable stereo broadcast, you can force this unit to receive in a monaural mode. d_ Press I_]TUNER to switch to the tuner in put.
• 4 Press _ENTEF{, v or _Cursor number from then press _PRESET A / _ / _ to choose the present which to start the Auto Preset function. Auto Preset will begin approximately If you do not select a preset number. Auto Preset will 5 seconds alter "READY" is displayed. Selecting a preset Tune in to the station you want to register, referring to "Selecting a frequency for reception (Normal tuning)" (_. the front panel display.
iiii[]i ,i̧ii i!i!i Retailing a preset statien You can call preset stations registered by automatic station preset or manual station preset. _]] gleadnl RadioDataSystemtuning (&K. andE#mpemodelson&) preset stations Press _TUNER to switch to the tuner input. To select a registered station, press _PRESET % /,, / v to select the preset number of the station. _]2 Press [_OPTION menu. _2,3 to display the Option #_ Use _Cursor _ / _ to display _ Preset" and press _ENTER.
iiiiiiii ¸iiiiiiii iii!ii!i!i 3i , 2 Press _INFO repeatedly until the desired information is displayed. Infommtion on the display key. The kind and then changes of information the information as you press is displayed is displayed. Front panel display (When "Program Type" selected) 4 Press _ENTER to start the search function. Frequency the Status for a while _;_ [] F'i..,:::,gr..ii_r,_ :iii;er.vi.c.e,_F'i..,:::,gr..ii_m T'::_Pe,_l_Rad:b:::, % f (Frequency Te::.::i..
Once you have connected a Yamaha iPod universal dock (such as the YDS- 12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (_) to give compressed audio formats such as MP3 a sharper, more dynamic sound.
Use the following remote control keys to operate (playback, stop, skip, etc.) your iPod/iPhone. You can check song information on the iPod/iPhone screen. _5<_ Switch to the DOCK (iPod) Press _IDISPLAY on the remote control to change between menu browse mode and simple remote mode, as required. input. When you select menu browse mode, the flont panel display changes as follows. Move the cursor up and down to different fields. Return to the previous menu or enter the menu you have selected.
iiiiiiiiiiilB: iiiiii i!iiii!i You can use special playback functions such as shuffle playback and repeat playback by first displaying the Option menu. Press _DOCK to switch to the DOCK input. Press mode. _DISPLAY to switch to menu browse When the repeat function is enabled. "O , One}" or ,,co (AllY' appears on the TV screen. Press _]Cursor switch to the DOCK playback function. To close the Option Play the Playback Press [_OPT_ON to display menu.
You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. _ NOTE When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection you must carry out pairing on both this unit and on the Bluetooth component.
Using Bluetooth components Use _Cursor @ When pairing is complete, carry out the following procedure to achieve a wireless connection between this unit and the Bluetooth component. When the wireless connection is complete, you playback from Bluetooth A / _7to select "Connect" press _ENTER. When wireless and _,1 connection is complete components. Depending on Bluetooth components, a wireless connection is established automatically or by operating the Bluetooth components.
SETUP This receiver playback has a unique devices, option menu and other fl'equently specific used for each menu type of input source, such as volume trim for compatible input sources, audio/video display for signals from Option menu items Option menu display and setup Select desired menu item enable function)theusing _Cursor _ / v(or/ <1/ > anda _ENTER. The following menu items are provided for each input source.
I Adus n 9voume i}e vee_s npu sou_ces m ÷ tsOd Input All source: Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Input source: HDM]I-4, AVI-4 _'_ Selects to reproduce whether 7. l-channel 5.1-channel when surround input signals back speakers -6.0 dB to 0.0 dB to +6.0 dB Automatically 0.0 dB flag for reproducing selects and reproduces in 6.1 - or are used.
Audio information vdeo • For details of settings, refer to "Receiving and sudo video signals fiom the HDM[ jack and audio signals fiom a jack other than HDMI" Input source: Combines digital HDMII-4, AVI-2 video from HDMI transmit - an playback devices" (_). connections to analog audio output again, and select the original input jack. The number of input signal channels (front/surround/ For example, channels, if input signal channels 2 surrounds are 3 front and LFE, "31210.
............ Input source: t'_ O_,_.... TUNER Sets this unit to automatically match FM broadcast frequencies in stereo, or to convert the frequency to monaural (_). Stsuffe paybackwtts Input source: DOCK PO_,_ ,_,/ P_3O_ o *_:_ .... (iPod) Changes the shuffle playback style on iPod _). Input source: DOCK (iPod) Changes the repeat playback style on iPod (_). Input source: TUNER Automatically detects radio stations in the FM frequency and registers them as preset stations _).
You can configure various function settings of this unit using the Setup menu. Setup menu display and settings Press _SETUP #_ Use [_JCursor _ / _7to navigate the _ submenus to find the desired setting and press _ENTER. on the remote control. When menu itemtheis desired displayed, use _Cursormultiple _ I _7to select item. Setup menu categories Set parameters for speakers, Stlch as Use _Cursor speaker status, and volume adjustment for each speaker.
i ii i Setup menu items ManagessettingsYorspeakers _/{a_us Setup menu Adjusts manually Front Config Speaker Setup submenu Sur.B Crossover Manually SWFR Phase speaker Extra Bass Level Distance Equalizer_ Test characteristics speaker configuration, production capacity), based on such as and bass Manually adjusts the volume of each speaker. and speakers) (speakers of the speakers set parameters. audio processing.
{:7!.... 0 !"!"i:. Selects ,:7, the size (sound reproduction speakers. capacity) of the front Select this for small speakers. The subwoofer ,,.... i:::, Selects the size of the surround back speakers. Sets the phase of the subwoofer if the bass audio is lacking or unclear. _=;" _ produce front channel components. low-frequency _2 Select this for large speakers. produce Select this when no surround connected.
Adust[n 9soundqua y w tsetse equa ze__ I11__ Separately adjusts the volume to select the desired speaker of each speaker. Use and adjust the volume [_Cursor _ / _7 with _Cursor <1/>. Front speaker L Front speaker R Center speaker Adjusts sound quality of tone using a parametric or graphic equalizer. Selecting adjustment units Use [_Cursor zx / v' to display "Unit," and then use _Cursor Select <1 / t> to choose the units of length (meters an equalizer type.
x • Adjusting the graphic x x x x x x x x x x x x equalizer Press If_iCursor v repeatedly to select the frequency you want to adj ust, then use !0iCursor to adjust the volume. Raising volume: Press II0]Cursor {>. Lowering volume: Press II(}Cursor <1. Turns the test tone generator on or off. Does not generate Generates test tones. test tones. While "On" is selected, tones are produced test constantly.
Setting the audio output function oi this ....... _W_s_,,, _,,,, ow Adjusts the delay between audio and video output (Lipsync function). H",,M "r ,",, Adjusts (from ,a.... the dynamic minimum low volumes, When connecting timing if the TV to a TV supports via HDMI, automatically an automatic lipsync adjusts Select this when the connected volumes Selects Dolby in conjunction to maximum). it is a good When video and audio output. support more audible.
Se n 9 _esa_upvoume Setting HDMI functions Sets the initial volume for when this receiver is turned on. When Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) signal playback. (Min) Sets the dynamic or a quiet environment, range suitable for low volume such as at night, for bitstream signals except t_r Dolby TrueHD (Auto) Adjusts signals based on input signal information.
i ii i'¸¸¸¸¸¸¸¸¸¸¸'=¸¸ 3iii ':¸ }:_eceve_ _ operas On va °TV (H©iAI _" _ _ Set the HDMI Control function to "On" to operate devices connected via HDMI. If the TV or other external components support HDMI Control (ex. Panasonic VIERA Link), you can use the remote controls of those devices to operate some of this unit's functions, and to synchronize this unit with the operation of those devices. Please refer to "Switching the input source on this unit automatically instructions.
,,As_i}_g }_g l__:_e}J_pu_' des Choose whether such as a BD/DVD through to playback na_on audio from an external player connected via HDMI of H©_/I_ component through this unit or a TV. Outputs audio through setting is selected, this unit only. When this the external audio format compatible Outputs audio through selected, the external format Outputs compatible component outputs an with this unit. a TV only. When this setting is component outputs an audio with the TV.
Mak&# the regeiver easier to use _i _ Select the input source that you want to rename Using _curs0r _ ! Select the input source that you want to _;,,_ rename using _Cursor _ ! V, _2 use _curso_ q 1 _ to select anew name from the following templates. 3 Piess l_ EN T ERi Func. Setup submenu Changes the input source names. Goes enter standby without operating. mode if you leave it Bln.ray Satellite DVD VCR SetTopBox Tape Cursor MD Sets the brightness display.
Setting the sound @ld program 70u _._>vw t wttsout a_w_w+s_ _w L If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function's default setting is "Off." When you want to enable this function, set the amount of time to pass before this unit will enter standby. You can set the parameters for the sound field programs (_). Sets the brightness of the front panel display.
Although the sound field To adjust the sound effects Press _SETUP programs would suitable satisfy you as they are with the default for acoustical conditions to display the Setup menu. of audio/video parameters, sources or rooms, you can arrange perform the effect the following by setting the sound field elements (parameters). operations. _P_ Once you have completed editing, press _SETUP to close the Setup menu.
Parameters usable _#certa_#sou#d Y_e_d CINEMA#SP parameters Adjusts the volume of the surround R channel. _5"2 _]l 2ch Stereo only Oto lOOq ooq Selects a surround decoder to be used with a sound field program in the MOVIE category. _5"_ Selects the Dolby Pro Logic Dolby Pro Logic lI Movie) Selects the Neo:6 (Cinema) lIx Movie (or Automatically bypasses the DSP circuit and tone control circuit depending on the condition of tone control etc., when an analog sound source is played back.
Parameters usable in surround decoder When Neo:6 Music is selected Dolby Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as PLIIx Music and Dolby PLII Music only Adjusts the soundscape of the front sound field. Sends front left/ right channels sounds to the surround speakers as well as the front speakers for a wraparound effect. necessary.
You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source. Selecting input source connected to DVD player The following remote control codes are assigned to input sources as factory default settings.
Registering remote control codes for external component operations The following section describes how to register remote control code using an example of the registration of the remote control codes of a Yamaha BD player connected to HDMI2 jack. • Perfotln each of the %llowing steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat IYomstep 2.
Resettingall remotecontrolcodes #_ Enter "9981" using _Numeric keys. Resetting all remote control codes for external components to the initial factory settings. Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat from step 2. Press _CODE % Once the remote control code is reset successfully the remote control will blink twice.
The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup #_ Use PROGRAM <3/[> to select the item to be set £_ from the following items. menu Settingthe impedanceof speakers (U.S.A.and Canadamodelson&) In the Advanced Setup menu, you can set the following settings. Switch this unit to the standby mode. 2 Press _ while pressing and holding STRAIGHT on the front panel.
Avoiding crossing remote control signals when using mu#_ple Yamaharegeivers • To change the remote control ID ......................... Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat from step I. Press [!#]CODE SET on the remote control The remote control of the unit can only receive signals from a receiver which has an identical ID (remote % control ID).
i This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If you connect devices that support HDMI Control (ex. Panasonic VIERA Linkcompatible TVs, DVD/Blu-ray Disc recorders, etc.
Swtch _sg the nput s®uce on ths un_au_ema_ca ywhen s'£enng ko TV sudo When tile HDMI Control (_) is operating the input source of this unit is automatically match operations carried through from TV, carry procedure. Use _Cursor zx I _ to select "HDMI Setup" and press _ENTEFL Connect this unit and the TV with an HDMI cable. to out on the TV. The default to the TV's audio enjoy TV sound out the following properly, changed input jack is AV4.
#_ Use _Cursor A / V to select "HDMI Setup" _ and press _ENTER. When using a TV that supports HDMI functions and Audio Return Channel function, audio/video output from this unit to the TV or audio output from the TV to this unit can be transmitted through a single HDMI cable (Audio Return Channel function). Audio signals transmitted from the TV to this unit can be assigned to any input source. Make sure_Cursor that "Control" selected, then use q / t> toisselect "On."and Connect cable.
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions center. below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Problem • The power will not turn on. page The protection circuitry operated 3 times consecutively. As a safety precaution, circuitry operates capability or service after the power is turned on.
!ii;iii!iiii! ;;iiiiiiiiiii Li!i!i iil iiiiiiii!iii!i!2 l ilili :ilili Problem • No sound. page Incorrect input or output cable connections. Connect the cables properly. persists, the cables may be detective. Ifa DVI-HDMI Display the HDMI Input Option connect cable is used to the unit with an external component, then it is necessary the connected to If the problem menu for 17 46 Speaker secure. The speaker speaker. the front panel display.
!ii;iii!iiii! ;;iiiiiiiiiii Lii!i!i iil iiiiiiii!iii!i!2 l ilili :ilili Problem • . • page No sound is heard from the surround This unit is in straight decoding mode and a monaural source is speakers. being played Press STRAIGHT mode. to exit straight decoding 30 Sound may not be output from input sources Combine of audio / video jacks to connect cannot be back. certain channels The right combination depending Try another sound feld program.
!ii;iii!iiii! ;;iiiiiiiiiii Li!i!i iil iiiiiiii!iii!i!2 l ilili :ilili Tuner(FIWAM) FM • The front display panel connection HDMI indicator page An error with the HDMI Try re-inserting has occurred. Confirm is flashing. • cable. that HDMI video that is not supported (HDMI the HDMI 46 by the unit is not being input page . FM stereo reception You are too far from the station Check the antenna is noisy. transmitter, or the input from the antenna is weak.
AM • The desired cannot station be tuned into ' The signal is weak, or the autenna connections are loose. Adjust the AM loop autenua Use the manual with the automatic tuning page orientation. 22 34 i tuning method. • i L o ._ii! ci :i.i"! g ...... . The unit is in the process recognizing method. page of the connection with your iPod/iPhone. Automatic preset work. station does not Automatic station preset is not available for AM stations. Use manual station preset. 3...
Remote control Problem • :!!i,iil, ._ii_ r. ,:::.i_ i.r_g ...... . page The Yamaha Bluetooth audio receiver component wireless The remote control does not work or and the Bluetooth are in the process function of Cause Remedy • page Wrong distance The remote control or angle. maxinmm properly. Bluetooth audio receiver component wireless Direct and the Bluetooth are in the process establishing a connection. {?,:::, r,_ F:"i e "i:.. e ,::i The pairing is completed. {?a i._,:::.
if!i:i:i:iii Eii iiiilil Audio information Dolby Pro Logic IIx Dolby Pro Logic playback Audio and video synchronization (lip sync) Lip sync, all abbreviation involves for lip synchronization, both a problem, signals synchronized Whereas the audio adjustment, syncing version capability that allows requires devices complex audio that user amplifier other is connected is connected arrangement to the woofer audio and video Surround realistic sound each amplifier restricted range
DSD Sound field program information Direct Stream storage media, single Digital shaping occurrence PCM rate, format higher stores sampling are used very high quantization better used audio quality for normal or receive signals signals MHz, as while than that offered is equal use ill movie by the speakers room to or size, jack. LFE 0.1 channel range low-frequency bass signals, from 20 Hz to 120 Hz.
if!i :>Eii iiiilil • HDMI signal compatibility NOTES Audio signals • When CPPM copy-protected depending • This unit is not compatible 2ch Linear PCM Multi-ch Linear PCM DSD 2ch, 32-192 kHz, 1(,/20/24 bit CD, DVD-Video, 8ch, 32-192 kHz, 1(,/20/24 bit DVD-Audio, etc. 2/5.1ch, 2.8224 MHz, 1 bit DVD-Audio, Blu-ray etc.
if!i:ii:iii Eii iiiilil • HDMI • Input jacks • Analog audio Audio x 5 (AV5. AV6. AUDIO 1. AUDIO2. V-AUX) • HDMI Specification: Deep Color. "x.v.Color." ARC (Audio Return Channel) • Video Format (Repeater • Digital audio Optical x 2 (AV 1, AV4) Coaxial x 2 (AV2, AV3) Auto Lips Sync. x 5 (AV3. AV4. AV5. AV6. V-AUX) Component x 2 (AVI, AV2) • Other - Dolby Pro Logic I[ Music. Dolby Pro Logic I[ Movie. Dolby Pro Logic I[ Game Mode) - VGA - Dolby Pro Logic Ilx Music. Dolby Pro Logic [Ix Movie.
!ii;iii!iiii! ;;iiiiiiiiiii Lii!i!i iil iiiiiiii!iii!i!2 l ilili :ilili • VIDEO SECTION • Input Sensitivity/Input Impedance AV5, etc ..................................................................... • Maximum Input Voltage AV5, etc. (l kHz, 0.5% THD) .................................... • Rated Output Voltage/Output Impedance AUDIO OUT ............................................................ SUBWOOFER • GENERAL 200 mV/47 kD, 2.3 V or more 200 mV/1.2 k(), (2ch Stereo & Front: Small) ............
Numerics D J speaker hyout I0 D.Range, 6I-channe] speaker ]ayout I0 Decoder 7 l-channe] speaker hyuut 10 Dirnrner_ Func. Setup .................................................................. Direct mode ................................................................................. 58 3I Disconnec< menu ............................................................ 47 Distance, Speaker Setup .............................................................. DSP Parameter ................
RqxmtOpfiun menu 47 VOLTAGE SELECTOR ............................................................... ReturnChan, HDM1 Setup ........................................................... 55 VOLUME ...................................................................................... VOL{JME S Vu]ume SCENE Setup function ........................................................................... menu ...................................................................................
@YAMAHA YAMAHA CORPORATION © 2010 Yamaha Corporation All rights reserved.
List of remote control codes Liste des codes de commande Liste der Fernbedienungscodes Lista 6ver fj irrstyrningskoder Elenco dei codici di telecomando TV A.R.
Genexxa 0320, 0340, 0347, 0350 0128, 0227 0282 GFM Giant Gibralter 0008, 0030, 0050, 0062 0277 0320 GoldHand Goldline GoldStar Goodmans Gorenje GPM GPX Gradiente Graetz Granada Grandin Gronic Grundig Grunpy Haier Halifax Hallmark Hampton Hanseatic Hautarex Hantor Harman/Kardon Harvard Harwood Havermy HCM Hema Hewlett Packard Higashi HiLine Hinari Hisawa Hisense Hitachi Hornyphon Hoshai Huanyu Hygashi Hyper Hypson Hyundai lberia ICE ICeS I1o IMA hnperial Indiana 0007, 0026, 0053, 0282, 0342,
0239, 0259, 0267, 0287, 0301, 0313, 0324, 0342, 0353, 0380, 0459, Philips Magnav0x Phoenix Phonola Pilot Pioneer Plantron Playsonic Polaroid Poppy Portland Prand0ni-Prince Precision Prima Princeton Prism Pmfex Pmfi-Tronic Praline Pmscan Prosonic Protech Proton Protron PROVIEW Provision Pulsar Pye Pymi Quandra Quasar Vision Quelle Questa Radialva RadioShack 0011, 0161, 0339, 0277, 0349, 0007, 0008, 0095, 0345, 0350, 0320, 0350 0256,0257, 0261, 0263, 0280,0281, 0296,0299, 0303, 0305, 0319, 0320, 0333, 0
Yamaha Yamishi Yokan Yoko Yorx Zanussi Zenith 0008, 0053, 0082, 0087 0282, 0320 0161, 0320, 0340, 0349, 0340 0282, 0008, 0030, 0061, 0026,0050, 0080, 0081, 0083, 0086, 0320 0277,0282, 0323, 0337, 0342, 0343, 0350 0346 0028,0029, 0031,0054, 0062 VCR ABS Adventura Adyson Aiwa Akai Akiba Akura Alba Alienware Ambassador American High Amstrad Anitech Apex ASA Asha Asuka Audio Dynamics Audiosonic Audiovox Baird 1016 1069 1008 1024, 1069 1021, 1008, 1008, 1008, 1025, 1016 1030 1068 1008, 1008, 1088 1028, 107
Sinndyne Solavox 1028 1030 Sonic Blue Sonneclair Sonoko Sontec 1022, 1123 1008 1009, 1025 1031 Sony Symphonic Systemax Tagar Systems Taisho 1001, 1053, 1080, 1083, 1216 1016 1016 1009, 1009 1068 1024 1026 1026 1008, 1020 1020, 1102, 1008, 1016 1016 1024 Tandberg Tandy Tashiko Tatung TCM Teac Tec Technics Teknika Teleavia Telefimken 1009 1065 1026, 1026, 1015, 1009, 1008, 1068 1068, 1027 1027 Teletech Tenosal Tensai 1008, 1008, 1008, 1031 1024 1005, 1027 1108, 1113, 1119, 1070 1008, 1029 1004, 1028
Pointer Polaroid Portland Powerpoint Prima Proceed Proscan Prosonic Protron Provision Pye Qwestar Raite RCA RedStar Regent Reoc Rimax Rio Roadstar Ronin Rotel Rowa Rownsonic Saba Sabaki Saivod Sampo Samsung Sansui Sanyo ScanMagic Schaub Lorenz Schneider Scientific Labs Scott Seeltech SEG Sharp Shinsonic Sigmatek Silva Singer Skymaster Skyworth Slim Art SM Electronic Sonic Blue Sontech Sony Soundmaster Soundmax Spectra Spectroniq Standard Star Cluster Starmedia Sungale Sunkai Superscan Supervision 2309,
Toconl Torx Toshiba Tristar Tudi Tusa TV86 Unika United Cable Universal Universum V2 Videoway View Star Viewnlaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3067 3017 3122 3127 3102 3072, 3077 3065, 3018, 3065, 3097, 3127 3019 3074, 3127 3127 3097, 3127 3098 3113, 3126 Commlink Comtech 4005 4050 Goldbox GoldStar 4213 4049 Condor Connexions Conrad 4008, 4024, 4219 4014, 4024 4024, 4215,4218, 4219 Goodmans Goodmind Grandin Grothnsen Conrad Electronic Contec Coolsat Cosat 4217, 4219 405
Quadral Q uelle Quiero RadioShack Radiola Radix Rainbow RCA Realistic Redpoint Re&tar RFT Roadstar Roch Rover Saba 4024, 4008, 4015, 4052 4019 4055, 4014, 4004 4093, 4113, 4116, 4207 4078 4009 4024, 4005, 4217 4031 4024, 4010, 4216 4007, 4005, 4216 4215, 4219 Skinsat SKR Skymaster Skymax SkySat 4053 4037 4066, 4112, 4118, 4119, 4122, 4197, 4008 4055, 4053 4217 4215, 4219, Skyvision SM Electronic Smart Sony SR Star Choice Starland Starring Start Trak Strong STS STV! Sumida Sabre Sagem Sakura 4006 4
@YAMA AV Receiver English Safety Brochure
[=_b'7/t'q_ CAUTION 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. RISKOFELECTRIC SHOCK DONOTOPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 To assure the finest perl\_rmance, please read this manual carefully. Keep it in a safe place t\_r future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, minimum clearances. allow the following Top: 30 cm, Rear: 20 cm, Sides: 20 cm 3 4 Locate this unit away from other electrical transl\_rmers to avoid humming sounds.
• Notes on remote controls and batteries • • • Do not spill water or other liquids on the remote control. Do not drop the remote control. Do not leave or store the remote control in the following conditions: • • • • • • • • • FOR Do not use different types of batteries (such as alkaline and manganese batteries) together. Specification of batteries may be different even though they look the same. Before inserting new batteries, wipe the compartment clean.
Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. [n the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was purchased. [f you experience ally difficulty, please contact Yamaha representative office ill your country. You call find full details on our website (http://www.yamaha-hifi.com/or http://ww_:yamaha-uk.com/for U.K. resident).
@ YAMAHA CORPORATION © 2010 Yamaha Corporation All rights reserved.
