Owner’s Manual AV Receiver English
CONTENTS INTRODUCTION Features and capabilities ................................................... 3 About this manual............................................................. 4 Supplied accessories......................................................... 4 Part names and functions.................................................. 5 Front panel........................................................................ 5 Rear panel.........................................................................
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 5-channel amplifier ■ 1-button input/sound field program switching (SCENE function) .......................29 ■ Speaker connections for 2- to 7.1-channel configurations – – – – – – (U.S.A. and Canada models only) Speaker impedance configuration.....................................................12 Speaker channels and functions .........................................................................................................
INTRODUCTION Features and capabilities About this manual • Some features are not available in certain regions. • This manual is created prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “dHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Part names and functions” (☞p. 5) for the information about each position of the parts.
INTRODUCTION Part names and functions e MEMORY Front panel f a A (Power) Switches this unit between on and standby mode. g b HDMI Through/iPod Charge indicator Lights up in any of the following cases while the unit is in standby mode. • When Standby Through function is enabled and audio/video from an external component connected with HDMI is output to a TV during the standby mode (☞p. 55). J1 • When an iPod is charging in the Yamaha iPod universal dock during the standby mode (☞p. 41).
INTRODUCTION Part names and functions Rear panel e AV OUT jacks a DOCK jack f b c d For connecting an optional Yamaha iPod universal dock (such as YDS-12) or Bluetooth wireless audio receiver (YBA-10) (☞p. 39, ☞p. 42). HDMI OUT jack For connecting an HDMI - compatible TV to output audio/video signals (☞p. 15). HDMI1-4 jacks For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals (☞p. 17).
INTRODUCTION Part names and functions Front panel display g Cursor indicators a HDMI indicator h b c d e f Lights up during normal HDMI communication when any of the HDMI 1-4 inputs are selected. CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator Lights up when receiving an FM/AM broadcast. SLEEP indicator Lights up when the sleep timer is on (☞p. 8). MUTE indicator Flashes when audio is muted.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control Transmits infrared signals. b TRANSMIT Lights up when a signal is output from the remote control. a c SOURCE A (SOURCE Power) b c Switches an external component on and off.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. Speaker channels and functions ■ Surround left and right speakers ■ Front left and right speakers The surround speakers are for effect and vocal sounds with the 5.1channel speakers providing rear-area sounds. When used with 6.1/ 7.
CONNECTIONS Connecting speakers Speaker layout ■ 5.1-channel speaker layout (5 speakers + subwoofer) ■ 6.1-channel speaker layout (6 speakers + subwoofer) J1 Front speaker R Front speaker L ■ 7.
CONNECTIONS Connecting speakers ■ Connecting the surround back speakers Connecting speakers and subwoofer Connect your speakers to their respective terminals on the rear panel. CAUTION • Remove the AC power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
CONNECTIONS Connecting speakers ■ (U.S.A. and Canada models only) Changing speaker impedance This unit is configured for 8Ω speakers as the factory setting. When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω. 1 2 4 5 Switch this unit to the standby mode, and then switch it on again. Connecting the banana plug (Except U.K., Europe, Asia and Korea models) Tighten the knob, and then insert the banana plug into the end of the terminal.
CONNECTIONS Connecting speakers ■ Connecting the subwoofer 1 Connect the subwoofer input jack to the SUBWOOFER jack on this unit with an audio pin cable. 2 Set the subwoofer volume as follows. Volume: Set to approximately half volume (or slightly less than half). Crossover frequency (if available): Set to maximum.
CONNECTIONS Connecting external components ■ Audio jacks Cable plugs and jacks This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. ■ Audio/Video jacks OPTICAL jacks COAXIAL jacks These jacks transmit optical digital audio signals. Use fiber-optic cables for optical digital audio signals. These jacks transmit coaxial digital audio signals. Use pin cables for digital audio signals.
CONNECTIONS Connecting external components ■ Connecting an HDMI video monitor Connecting a TV monitor Connect the HDMI cable to the HDMI OUT jack. This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV.
CONNECTIONS Connecting external components ■ Connecting a video monitor When using other TVs Connect the video pin cable to the VIDEO (MONITOR OUT) jack. To transmit sound from the TV to this unit, connect its AV1-6 or AUDIO1-2 jacks to the TV’s audio output jacks. Depending on the connection on TV, connect the TV’s audio output to the AV1-6 or AUDIO1-2.
CONNECTIONS Connecting external components CODE SET TRANSMIT SOURCE Connecting BD/DVD players and other devices RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 d This unit has the following input jacks. Connect them to the appropriate output jacks on the playback devices such as BD/DVD players.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with component cables Connect the device with a component video cable to one of the AV1-2 input jacks. ■ Component connections to analog audio output devices Component video / Audio output Using optical digital audio output sources Select the AV1 input that the playback device is connected to for playback.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with video cables Connect the playback device with a video pin cable to one of the AV3-6 input jacks. Using analog stereo audio output sources Select the AV5 or AV6 input that the playback device is connected to for playback. Using optical digital audio output sources Select the AV4 input that the playback device is connected to for playback.
CONNECTIONS Connecting external components ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) that the playback device is connected to for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) that the playback device is connected to for playback.
CONNECTIONS Connecting external components Connecting video cameras and portable audio players Transmitting input A/V to external components Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, video game units, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external components through the AV OUT and AUDIO OUT jacks.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack.
CONNECTIONS Set up the speaker parameters automatically (YPAO) This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed).
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE RECEIVER SLEEP 5 HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 V-AUX 6 1 [ A ] [ B ] During YPAO, the results of measuring the acoustic characteristics are used to set the equalizer (parametric equalizer) to give a unified sound field. After setting, you can select the characteristics of the sound field in “EQ Type,” as necessary.
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE ■ When an error message appears RECEIVER SLEEP during measurement HDMI 1 2 3 4 3 4 Check the content of the message from the “Error message” (☞p. 26) to resolve the problem, and carry out the measurement process again. AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK YPAO TUNER FM INFO E-9:CANCEL AM PRESET TUNING MEMORY ENHANCER SUR.
CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Message list ■ Error message E-1:FRONT SP NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. E-2:SUR. SP ■ When a warning message appears before measurement E-4:SBR->SBL Connect MIC! The YPAO microphone is not connected. Connect the YPAO microphone to the YPAO MIC jack on the front panel. Unplug HP! The headphones are connected. Remove the headphones.
CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Warning message W-1:PHASE The speakers displayed are connected with the opposite polarity. Depending on the type of speakers you are using and the environment in which you have them installed, this message may occur even if the speakers are connected correctly. Depending on the type of speakers, “W-1” may display even if the speakers are connected correctly.
PLAYBACK CODE SET TRANSMIT SOURCE Basic playback procedure RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Turn on this unit and select the input source using dInput selector. The name of the selected input source is displayed for a few seconds.
PLAYBACK Changing input settings with a single key (SCENE function) CODE SET TRANSMIT SOURCE RECEIVER SLEEP This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING TUNER FM AM INFO MEMORY Four scenes are available for different uses, such as d playing movies or music.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 AV 1 2 3 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER INFO MEMORY MOVIE MUSIC TUNING ENHANCER SUR. DECODE STEREO STRAIGHT DIRECT SCENE TV CD SETUP Press gSTEREO repeatedly Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE ■ Enjoying sound field programs RECEIVER SLEEP without surround sound speakers HDMI 1 2 3 4 3 4 This unit allows you to use virtual surround speakers to enjoy sound field surround effects, even without any surround speakers (Virtual CINEMA DSP mode). You can even enjoy surround sound presence with just a minimal configuration of the front speakers only.
PLAYBACK Enjoying sound field programs Sound field programs Action Game This sound field is suitable for action games such as car racing and FPS games. It uses reflection data that limits the effects range per channel in order to offer a powerful playing environment that makes the listener feel as if they are right there by enhancing various effects tones while maintaining a clear sense of directions. Roleplaying Game This sound field is suitable for role-playing and adventure games.
PLAYBACK Enjoying sound field programs ■ Category: STEREO Suitable for listening to stereo sources. 2ch Stereo Use this program to mix down multi-channel sources to 2-channels. When multi-channel signals are input, they are down mixed to 2-channels and output from the front left and right speakers. 7ch Stereo Use this program to output sound from all speakers. When you playback multi-channel sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all speakers.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER e FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 3 HDMI 1 2 3 4 1 2 3 4 5 6 1 2 V-AUX [ A ] [ B ] DOCK AV AUDIO TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC STEREO STRAIGHT DIRECT Use eTUNING H / I to set a frequency to receive. eTUNING H Increases the frequency. Press and hold this key for longer than a second to search automatically for a station d on a higher frequency than the current one. J1 e eTUNING I Decreases the frequency.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 4 HDMI 1 2 3 4 4 AV 1 2 3 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING AUDIO TUNER FM AM INFO MEMORY MOVIE MUSIC e Press jENTER, then press ePRESET F / G or jCursor B / C to choose the present number from which to start the Auto Preset function. Auto Preset will begin approximately 5 seconds after you select a preset number.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE Recalling a preset station RECEIVER SLEEP Clearing preset stations Radio Data System tuning (U.K. and Europe models only) HDMI 1 2 1 2 3 4 3 4 You can call preset stations registered by automatic station preset or manual station preset. J1 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING To select a registered station, press ePRESET d F / G to select the preset number of the station.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 2 HDMI 1 2 3 4 1 2 3 4 5 6 1 2 V-AUX [ A ] [ B ] DOCK AV Press fINFO repeatedly until the desired information is displayed. Program Service FM AM INFO MEMORY PRESET Program Type VOL. STEREO TUNED CLASSICS L SL SW C R SR READY VOL.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE RECEIVER SLEEP Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞p. 33) to give compressed audio formats such as MP3 a sharper, more dynamic sound.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE Use the following remote control keys to operate (playback, stop, skip, etc.) your iPod/iPhone. You can check song information on the iPod/iPhone screen. J1 RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING d dDOCK Switch to the DOCK (iPod) input. jCursor B / C Move the cursor up and down to different fields.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE ■ Shuffle/Repeat playback RECEIVER SLEEP You can use special playback functions such as shuffle playback and repeat playback by first displaying the Option menu. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. J1 HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING NOTE d TUNER FM AM INFO MEMORY e ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE Using Bluetooth™ components RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM INFO MEMORY PRESET When pairing is complete, carry out the following procedure to achieve a wireless connection between this unit and the Bluetooth component. When the wireless d connection is complete, you playback from Bluetooth components.
SETUP CODE SET TRANSMIT SOURCE Configuring the settings specific for each input source (Option menu) RECEIVER SLEEP HDMI 1 2 3 4 4 This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from playback devices, and other frequently used menu items.
SETUP Configuring the settings specific for each input source (Option menu) ■ Adjusting volume between input sources Volume Trim Input source: ■ Selecting the 5.1-channel signal playback method EXTD Surround All Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Adjustable range -6.0 dB to 0.0 dB to +6.0 dB Default setting 0.0 dB Adjustment increments 0.
SETUP Configuring the settings specific for each input source (Option menu) ■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: – an playback device is connected with an HDMI cable but cannot transmit audio through HDMI – an playback device with component video output and analog audio output (such as certain game consoles) are connected to the system • For details
SETUP Configuring the settings specific for each input source (Option menu) ■ Changing FM mode (Stereo/Monaural) FM Mode Input source: ■ Shuffle playback with iPod/iPhone Shuffle TUNER Sets this unit to automatically match FM broadcast frequencies in stereo, or to convert the frequency to monaural (☞p. 35). ■ Automatically presetting FM radio stations Auto Preset Input source: DOCK (iPod) Changes the shuffle playback style on iPod (☞p. 41).
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can configure various function settings of this unit using the Setup menu.
SETUP Setting various functions (Setup menu) Setup menu items ■ Manual speaker setup Manages settings for speakers Config Setup menu Speaker Setup Config Level Distance Equalizer Test Tone Sound Setup Lipsync Adaptive DRC D.Range Max Volume Init Volume HDMI Setup Control TVAudio J1 ReturnChan J1 Standby J1 Audio Subwoofer Front Center Sur. LR Sur.B Crossover SWFR Phase Extra Bass (speakers) (unit and speakers) (speakers and frequency bands) HDMI Auto Auto Manual Func.
SETUP Setting various functions (Setup menu) Front Selects the size (sound reproduction capacity) of the front speakers. J1 Small (Default) Large Select this for small speakers. The subwoofer will produce front channel low-frequency components. J2 Select this for large speakers. The front speakers will produce all of the front channel frequency components. Center Selects the size of the center speakers. None Sur. B Selects the size of the surround back speakers.
SETUP Setting various functions (Setup menu) ■ Controlling the volume of each speaker Level ■ Manually setting speaker distance Distance Separately adjusts the volume of each speaker. Use jCursor B / C to select the desired speaker and adjust the volume with jCursor D / E. ■ Adjusting sound quality with the equalizer Equalizer Adjusts the timing at which the speakers produce audio so that sounds from the speakers reach the listening position at the same time.
SETUP Setting various functions (Setup menu) ■ Generating test tones ■ Adjusting the graphic equalizer 1 2 When “EQ Select” is displayed, use jCursor D / E to select “GEQ” and press jENTER. 3 Raising volume: Press jCursor E. Lowering volume: Press jCursor D. Check that “Channel” selects and use jCursor D / E to select the speaker for which you want to adjust the equalizer. GEQ Press jCursor C repeatedly to select the frequency you want to adjust, then use jCursor D / E to adjust the volume.
SETUP Setting various functions (Setup menu) ;Sound Setup Lipsync Adjusts the delay between audio and video output (Lipsync function). VOL. L SL SW C R SR HDMI Auto When connecting to a TV via HDMI, automatically adjusts output timing if the TV supports an automatic lipsync function. Sound Setup submenu Off (Default) Lipsync Adjusts the delay between video and audio output. Adaptive DRC Auto-adjusting the sound level to make even low volumes more audible. D.
SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range D.Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) signal playback. Min/Auto (Min) Sets the dynamic range suitable for low volume or a quiet environment, such as at night, for bitstream signals except for Dolby TrueHD signals. (Auto) Adjusts the dynamic range for Dolby TrueHD signals based on input signal information.
SETUP Setting various functions (Setup menu) ■ Receiver operation via TV (HDMI Control) Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (ex. Panasonic VIERA Link), you can use the remote controls of those devices to operate some of this unit’s functions, and to synchronize this unit with the operation of those devices.
SETUP Setting various functions (Setup menu) ■ Changing the output destination of HDMI input audio signals Audio Choose whether to playback audio from an external component such as a BD/DVD player connected via HDMI through this unit or through a TV. Amp (Default) Outputs audio through this unit only. When this setting is selected, the external component outputs an audio format compatible with this unit. TV Outputs audio through a TV only.
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE Making the receiver easier to use RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 SETUP AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING VOL. ;Func. Setup L SL SW C R SR 2 3 Select the input source that you want to rename using jCursor B / C. Use jCursor D / E to select a new name from the following templates. 2 3 Select the input source that you want to rename using jCursor B / C. Press jENTER.
SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating AutoPowerDown ■ Setting the brightness of the front panel display You can set the parameters for the sound field programs (☞p. 59). Dimmer If you do not operate this unit or use the remote control for an extended period of time, it will automatically go into standby mode (Auto Power Down function). This function’s default setting is “Off.
SETUP Setting sound field program parameters CODE SET TRANSMIT SOURCE RECEIVER SLEEP Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters). To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
SETUP Setting sound field program parameters CINEMA DSP parameters Parameters usable in certain sound field programs 2ch Stereo only Selects a surround decoder to be used with a sound field program in the MOVIE category. J1 Dolby PLIIx Movie (Dolby PLII Movie) Selects the Dolby Pro Logic IIx Movie (or Dolby Pro Logic II Movie) decoder. Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.
SETUP Setting sound field program parameters Parameters usable in surround decoder When Neo:6 Music is selected Dolby PLIIx Music and Dolby PLII Music only Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. C.Image Panorama Adjusts the soundscape of the front sound field. Sends front left/ right channels sounds to the surround speakers as well as the front speakers for a wraparound effect.
SETUP CODE SET TRANSMIT SOURCE RECEIVER SLEEP b c You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP MI 1 2 1 2 3 4 3 4 d Registering remote control codes for external component operations AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNING MEMORY ENHANCER SUR.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP Resetting all remote control codes HDMI 1 2 1 2 3 4 3 4 Resetting all remote control codes for external components to the initial factory settings. AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 3 Use PROGRAM l / h to select the item to be set from the following items. Setting the impedance of speakers (U.S.A. and Canada models only) In the Advanced Setup menu, you can set the following settings.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) CODE SET TRANSMIT SOURCE n RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV Avoiding crossing remote control signals when using multiple Yamaha receivers AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK ■ To change the remote control ID Changing FM/AM frequency steps (Asia and General models only) Perform each of the following steps within 1 minute.
SETUP Using the HDMI Control function This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If you connect devices that support HDMI Control (ex. Panasonic VIERA Linkcompatible TVs, DVD/Blu-ray Disc recorders, etc.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC ■ Switching the input source on this To use other jacks to input audio signals from TV, carry out the following procedure. When the HDMI Control (☞p. 67) is operating properly, the input source of this unit is automatically changed to match operations carried out on the TV.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE ■ Single HDMI cable input to TV RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV When using a TV that supports HDMI functions and Audio Return Channel function, audio/video output from this unit to the TV or audio output from the TV to this unit can be transmitted through a single HDMI cable (Audio Return Channel function). Audio signals transmitted from the TV to this unit can be assigned to any input source.
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page The power will not turn on. The protection circuitry operated 3 times consecutively.
APPENDIX Troubleshooting Problem No sound. No picture. Cause Remedy See page Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 17 If a DVI-HDMI cable is used to connect the unit with an external component, then it is necessary to use an audio input jack for a different input to output audio. Display the HDMI Input Option menu for the connected cable, select “Audio In,” and select the jack to use for audio input.
APPENDIX Troubleshooting Problem No sound is heard from the surround speakers. No sound is heard from the surround back speakers. No sound is heard from the subwoofer. Cause Remedy See page This unit is in straight decoding mode and a monaural source is being played back. Press STRAIGHT to exit straight decoding mode. 30 Sound may not be output from certain channels depending on input sources or sound field programs. Try another sound field program.
APPENDIX Troubleshooting HDMI™ Problem Tuner (FM/AM) Cause Remedy See page FM Problem The front panel display HDMI indicator is flashing. No picture or sound. (When using HDMI Control function) TV sound is not output from this unit when operating the remote control of the TV. An error with the HDMI connection has occurred. Try re-inserting the HDMI cable. — Confirm that HDMI video that is not supported by the unit is not being input (HDMI Input → Option menu → “Signal Info”).
APPENDIX Troubleshooting iPod™/iPhone™ AM Cause The desired station cannot be tuned into with the automatic tuning method. The signal is weak, or the antenna connections are loose. Adjust the AM loop antenna orientation. 22 Use the manual tuning method. 34 Automatic station preset does not work. Automatic station preset is not available for AM stations. Use manual station preset. 34 Continuous crackling and hissing noises are heard. The supplied AM loop antenna is not connected.
APPENDIX Troubleshooting Bluetooth™ Display Searching... Remote control Cause Remedy See page The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of pairing. — The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of establishing a connection. — Completed The pairing is completed. — Canceled The pairing is canceled.
APPENDIX Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
APPENDIX Glossary DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX Specifications ■ Input jacks ■ HDMI • Analog audio Audio x 5 (AV5, AV6, AUDIO1, AUDIO2, V-AUX) • HDMI Specification: Deep Color, “x.v.
APPENDIX Specifications ■ VIDEO SECTION ■ GENERAL • Maximum Input Voltage AV5, etc. (1 kHz, 0.5% THD) .................................... 2.3 V or more • Video Signal Type [U.S.A., Canada, Korea and General models] ........................ NTSC [Other models] ........................................................................... PAL • Rated Output Voltage/Output Impedance AUDIO OUT ............................................................200 mV/1.2 kΩ SUBWOOFER (2ch Stereo & Front: Small).....
APPENDIX Index Numerics D 5.1-channel speaker layout........................................................... 10 6.1-channel speaker layout........................................................... 10 7.1-channel speaker layout........................................................... 10 D.Range, Sound Setup ................................................................ Decoder Mode, Option menu...................................................... Dimmer, Func. Setup ..............................
APPENDIX Index Repeat, Option menu ................................................................... 47 ReturnChan, HDMI Setup ........................................................... 55 S SCENE function........................................................................... 29 Setup menu................................................................................... 48 Shuffle playback, iPod/iPhone..................................................... 41 Shuffle, Option menu.....................
© 2010 Yamaha Corporation All rights reserved.
List of remote control codes Lista de códigos de mando a distancia Liste des codes de commande Lijst met afstandsbedieningscodes Liste der Fernbedienungscodes Lista över fjärrstyrningskoder Elenco dei codici di telecomando TV A.R.
Genexxa 0320, 0340, 0347, 0350 GFM 0128, 0227 Giant 0282 Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012, 0026, 0031, 0050, 0053, 0161, 0277, 0282, 0320, 0323, 0342, 0343, 0346, 0349, 0350 Goodmans 0246, 0272, 0282, 0320, 0323, 0337, 0343, 0344, 0349, 0350, 0462, 0473, 0477 Gorenje 0161, 0351 GPM 0340 GPX 0129 Gradiente 0240 Graetz 0347 Granada 0171, 0282, 0320, 0321, 0342, 0344, 0346, 0349, 0350 Grandin 0340, 0343, 0348, 0349 Gronic 0282 Grundig 0160, 0161, 0171, 031
0239, 0256, 0257, 0259, 0261, 0263, 0267, 0280, 0281, 0287, 0296, 0299, 0301, 0303, 0305, 0313, 0319, 0320, 0324, 0333, 0339, 0342, 0349, 0350, 0353, 0357, 0360, 0380, 0383, 0452, 0459, 0460 Philips Magnavox 0011, 0032, 0033 Phoenix 0161, 0277, 0320, 0339, 0349, 0350 Phonola 0277, 0320, 0339, 0349, 0350 Pilot 0007, 0008, 0050 Pioneer 0008, 0026, 0094, 0095, 0161, 0320, 0345, 0347, 0349, 0350, 0458 Plantron 0320, 0323, 0337, 0350 Playsonic 0282 Polaroid 0039, 0142, 0202, 0234 Poppy 0323, 0343 Portland 0007,
Yamaha Yamishi Yokan Yoko Yorx Zanussi Zenith 0008, 0026, 0050, 0053, 0080, 0081, 0082, 0083, 0086, 0087 0282, 0320 0320 0161, 0277, 0282, 0320, 0323, 0337, 0340, 0342, 0343, 0349, 0350 0340 0282, 0346 0008, 0028, 0029, 0030, 0031, 0054, 0061, 0062 VCR ABS Adventura Adyson Aiwa 1016 1069 1008 1024, 1026, 1027, 1069 Akai 1021, 1027 Akiba 1008, 1029 Akura 1008, 1027, 1029 Alba 1008, 1009, 1024, 1025, 1029, 1030 Alienware 1016 Ambassador 1030 American High 1068 Amstrad 1008, 1009, 1026 Anitech 1008, 1029
Sinudyne Solavox Sonic Blue Sonneclair Sonoko Sontec Sony 1028 1030 1022, 1123 1008 1009, 1025 1031 1001, 1016, 1048, 1053, 1073, 1074, 1080, 1081, 1082, 1083, 1108, 1118, 1216 Stack 1016 Stack 9 1016 Standard 1009, 1025 Stern 1009 STS 1068 Sunkai 1024 Sunstar 1026 Suntronic 1026 Sunwood 1008, 1029 Superscan 1020 Sylvania 1020, 1068, 1069, 1102, 1126 Symphonic 1008, 1069, 1126 Systemax 1016 Tagar Systems 1016 Taisho 1024 Tandberg 1009 Tandy 1065 Tashiko 1026, 1071 Tatung 1026, 1027, 1028 TCM 1015, 1024, 10
2309, 2310, 2311, 2344, 2345, 2347, 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 2362 Powerpoint 2363 Prima 2252 Proceed 2130 Proscan 2156 Prosonic 2360, 2377 Protron 2202 Provision 2358 Pye 2144 Qwestar 2148 Raite 2380 RCA 2021, 2029, 2104, 2105, 2131, 2149, 2156, 2157, 2229 RedStar 2356, 2360, 2362 Regent 2153 Reoc 2355 Rimax 2361 Rio 2133 Roadstar 2331, 2358 Ronin 2363 Rotel 2203 Rowa 2154, 2383 Rownsonic 2353 Saba 2148, 2188 Sabaki 2355 Saivod 2362 Sampo 2141 Samsung 2000, 2045, 2077, 2112, 2113
Tocom Torx Toshiba Tristar Tudi Tusa TV86 Unika United Cable Universal Universum V2 Videoway View Star Viewmaster Vision Visiopass Vortex View Wittenberg Zenith Zentek 3067 3017 3122 3127 3102 3072, 3123 3077 3065, 3070 3018, 3119 3065, 3070 3097, 3099 3127 3019 3074, 3077, 3079 3127 3127 3097, 3100, 3101 3127 3098 3113, 3122, 3124 3126 Sattelite AB Sat AccessHD ADB AGS Akai Alba 4216, 4217 4104 4220 4216 4053, 4055 4001, 4004, 4006, 4007, 4062, 4217 Aldes 4005, 4007, 4010 Allsat 4048, 4053, 4055 Allsoni
AV Receiver English Safety Brochure
English IMPORTANT SAFETY INSTRUCTIONS 7 CAUTION 8 RISK OF ELECTRIC SHOCK DO NOT OPEN 9 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place - away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. For proper ventilation, allow the following minimum clearances.
■ • • • • • • • • • • • • Notes on remote controls and batteries Do not spill water or other liquids on the remote control. Do not drop the remote control. Do not leave or store the remote control in the following conditions: – places of high humidity, such as near a bath – places of high temperatures, such as near a heater or stove – places of extremely low temperatures – dusty places Insert the battery according to the polarity markings (+ and -).
Limited Guarantee for European Economic Area (EEA) and Switzerland Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
© 2010 Yamaha Corporation All rights reserved.
Quadral Quelle Quiero RadioShack Radiola Radix Rainbow RCA Realistic Redpoint Redstar RFT Roadstar Roch Rover Saba Sabre Sagem Sakura Samsung SAT Sat Cruiser Sat Partner Sat Team Satcom Satec Satelco Satford Satmaster Satplus Schneider Schwaiger SCS Seemann SEG Seleco Servi Sat Siemens Silva Skantin Skardin 4024, 4007, 4005, 4008, 4216 4015, 4215, 4219 4052 4019 4055, 4053 4014, 4037 4004 4093, 4066, 4112, 4113, 4118, 4119, 4116, 4122, 4197, 4207 4078 4009 4024, 4008 4005, 4055, 4053 4217 4031 4024, 4217
