Owner's Manual

En 65
■ Dynamic Range
Selects the dynamic range adjustment method for audio bit stream (Dolby Digital and
DTS) signal playback.
Settings
■ Max Volume
Specifies the maximum volume level that is adjustable with VOLUME on the remote
control or VOLUME on the front panel.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default setting
+16.5 dB
■ Initial Volume
Sets the initial volume for when the receiver is turned on.
Settings
Setting sound program and decoder parameters (DSP)
Configuring the settings of sound programs and surround decoders.
• Configurable items vary depending on the selected sound program or surround decoder.
■ CINEMA DSP 3D
Turns CINEMA DSP 3D (p.36) on or off. When CINEMA DSP 3D is set to On, the
CINEMA DSP 3D mode automatically turns on in a sound program (except for 2ch
Stereo and 5ch Stereo).
Settings
• This setting can be set when the selected sound program supports CINEMA DSP.
Maximum (Default) Produces audio without adjusting the dynamic range.
Standard Adjusts the dynamic range for optimum volume for regular home use.
Minimum/Auto
(Minimum) Sets the dynamic range suitable for low volume or a quiet
environment, such as at night, for bit stream signals except for Dolby
TrueHD signals.
(Auto) Adjusts the dynamic range for Dolby TrueHD signals based on
input signal information.
Off (Default)
The volume is set at the level when the receiver last entered standby
mode.
On
Makes the initial volume Mute or -80 dB to +16.5 dB (0.5 dB
increments). (This setting is only available when setting a volume lower
than Max Volume.)
Off Disables CINEMA DSP 3D.
On (Default) Enables CINEMA DSP 3D.