Owner’s Manual AV Receiver English
CONTENTS INTRODUCTION Features and capabilities ................................................... 3 About this manual............................................................. 4 Supplied accessories......................................................... 4 Part names and functions.................................................. 5 Front panel........................................................................ 5 Rear panel.........................................................................
INTRODUCTION Features and capabilities ■ Built-in high-quality, high-power 7-channel amplifier ■ 1-button input/sound field program switching (SCENE function) .......................30 ■ Speaker connections for 2- to 7.1-channel configurations – – – – – – (U.S.A. and Canada models only) Speaker impedance configuration.....................................................12 Speaker channels and functions .........................................................................................................
INTRODUCTION Features and capabilities About this manual • Some features are not available in certain regions. • This manual is created prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and product, the product has priority. • “dHDMI1” (example) indicates the name of the parts on the remote control. Refer to the “Part names and functions” (☞p. 5) for the information about each position of the parts.
INTRODUCTION Part names and functions e MEMORY Front panel f a A (Power) Switches this unit between on and standby mode. g b HDMI Through/iPod Charge indicator Lights up in any of the following cases while the unit is in standby mode. • When Standby Through function is enabled and audio/video from an external component connected with HDMI is output to a TV during the standby mode (☞p. 56). J1 • When an iPod is charging in the Yamaha iPod universal dock during the standby mode (☞p. 42).
INTRODUCTION Part names and functions Rear panel e AV OUT jacks a DOCK jack f b c d For connecting an optional Yamaha iPod universal dock (such as YDS-12) or Bluetooth wireless audio receiver (YBA-10) (☞p. 40, ☞p. 43). HDMI OUT jack For connecting an HDMI - compatible TV to output audio/video signals (☞p. 16). HDMI1-4 jacks For connecting external components equipped with HDMIcompatible outputs to receive audio/video signals (☞p. 18).
INTRODUCTION Part names and functions Front panel display g Cursor indicators a HDMI indicator h b c d e f Lights up during normal HDMI communication when any of the HDMI 1-4 inputs are selected. CINEMA DSP indicator Lights up when a sound field effect that uses CINEMA DSP technology is selected. Tuner indicator Lights up when receiving an FM/AM broadcast. SLEEP indicator Lights up when the sleep timer is on (☞p. 8). MUTE indicator Flashes when audio is muted.
INTRODUCTION Part names and functions a Remote control signal transmitter Remote control Transmits infrared signals. b TRANSMIT Lights up when a signal is output from the remote control. a c SOURCE A (SOURCE Power) b c Switches an external component on and off.
CONNECTIONS Connecting speakers This unit uses acoustic field effects and sound decoders to bring you the impact of a real movie theater or concert hall. These effects will be brought to you with ideal speaker positioning and connections in your listening environment. Speaker channels and functions ■ Surround left and right speakers ■ Front left and right speakers The surround speakers are for effect and vocal sounds with the 5.1channel speakers providing rear-area sounds. When used with 6.1/ 7.
CONNECTIONS Connecting speakers Speaker layout ■ 7.1-channel speaker layout (7 speakers + subwoofer) ■ 6.1-channel speaker layout (6 speakers + subwoofer) ■ 5.
CONNECTIONS Connecting speakers Connecting speakers and subwoofer Connect your speakers to their respective terminals on the rear panel. CAUTION • Remove the AC power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity.
CONNECTIONS Connecting speakers ■ (U.S.A. and Canada models only) Changing speaker impedance This unit is configured for 8Ω speakers as the factory setting. When connecting to 6Ω speakers, carry out the following procedure to switch to 6Ω. 1 2 4 5 Switch this unit to the standby mode, and then switch it on again. Connecting the banana plug (Except U.K., Europe, Asia and Korea models) Tighten the knob, and then insert the banana plug into the end of the terminal.
CONNECTIONS Connecting speakers ■ Connecting the subwoofer ■ Bi-amp connection for front speakers This unit can connect speakers that support bi-amp connections. When connecting speakers, connect the FRONT jacks and the SURROUND BACK/BI-AMP jacks as in the diagram below. To activate a bi-amp connection, connect the power cable, and then set the following. 1 2 Check that the unit power is in standby mode. Press A while pressing and holding STRAIGHT on the front panel.
CONNECTIONS Connecting external components Cable plugs and jacks S VIDEO jack (U.K. and Europe models only) This unit is equipped with the following input/output jacks. Use jacks and cables appropriate for components that you are going to connect. ■ Audio/Video jacks VIDEO jack This jack transmits conventional analog video To transmit S-video signals that include luminance signals. (Y) and chrominance (C) components. Use video pin cables. Use S-video cable.
CONNECTIONS Connecting external components Connecting a TV monitor When connecting to an HDMI compatible TV This unit is equipped with the following three types of output jack for connection to a TV. HDMI OUT, COMPONENT VIDEO or VIDEO. Select the proper connection according to the input signal format supported by your TV. Video signal such as component video and video received by this unit is converted to HDMI and output to the TV.
CONNECTIONS Connecting external components ■ Connecting an HDMI video monitor ■ Connecting a video monitor J1 Connect the HDMI cable to the HDMI OUT jack. Connect the video pin cable to the VIDEO (MONITOR OUT) jack.
CONNECTIONS Connecting external components ■ Listening to TV audio To transmit sound from the TV to this unit, connect as followings according to the TV: When using a TV that supports the Audio Return Channel function and HDMI Control function When your TV supports both HDMI Control (Ex. Panasonic VIERA Link) and Audio Return Channel functions, audio/video output from the unit to the TV and audio output from the TV to the unit are possible using a single HDMI cable.
CONNECTIONS Connecting external components CODE SET TRANSMIT SOURCE Connecting BD/DVD players and other devices RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 d This unit has the following input jacks. Connect them to the appropriate output jacks on the playback devices such as BD/DVD players.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with component cables Connect the device with a component video cable to one of the AV1-2 input jacks. ■ Component connections to analog audio output devices Component video / Audio output Using optical digital audio output sources Select the AV1 input that the playback device is connected to for playback.
CONNECTIONS Connecting external components ■ Connecting BD/DVD players and other devices with S-video cables (U.K. and Europe models only) Using coaxial digital audio output sources Select the AV3 input that the playback device is connected to for playback. Connect the S-video cable to the AV5 input jack. Connect the output audio to the AV5 analog audio jack.
CONNECTIONS Connecting external components ■ Connecting CD players and other audio devices Using coaxial digital output sources Select the AV input (AV2 or AV3) that the playback device is connected to for playback. Using analog stereo output sources Select the audio input (AUDIO1-2) that the playback device is connected to for playback.
CONNECTIONS Connecting external components Connecting video cameras and portable audio players Transmitting input A/V to external components Use the VIDEO AUX jacks on the front panel to temporarily connect video cameras, video game units, or portable audio devices to the receiver. Select the V-AUX input to use these connected devices. This receiver can transmit selected incoming analog audio/video signals to external components through the AV OUT and AUDIO OUT jacks.
CONNECTIONS Connecting the FM/AM antennas An indoor FM antenna and an AM loop antenna are supplied with this receiver. Connect these antennas properly to their respective jacks. AM loop antenna Position the AM antenna away from the receiver. The wires of the AM antenna have no polarity. You can connect either wire to the AM jack or the GND jack.
CONNECTIONS Set up the speaker parameters automatically (YPAO) This unit is equipped with a YPAO (Yamaha Parametric Room Acoustic Optimizer) that adjusts the status, size, and volume balance of the speakers in order to provide an optimal sound field. Using YPAO allows you to automatically configure settings for which specialist knowledge is usually needed, such as adjusting speaker output and acoustic parameters to suit your listening room (the room in which this unit is placed).
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE RECEIVER SLEEP 5 HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK FM AM MEMORY MOVIE MUSIC PRESET 6 Press iSETUP to start measurement. Display during measurement During YPAO, the results of measuring the acoustic characteristics are used to set the equalizer (parametric equalizer) to give a unified sound field.
CONNECTIONS Set up the speaker parameters automatically (YPAO) CODE SET TRANSMIT SOURCE ■ When an error message appears RECEIVER SLEEP during measurement HDMI 1 2 3 4 3 4 Check the content of the message from the “Error message” (☞p. 27) to resolve the problem, and carry out the measurement process again. AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM ERROR AM PRESET INFO .
CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Message list ■ Error message NOTE If the following messages appear, resolve the problems that have occurred and carry out the measurement process again. ■ When a warning message appears before measurement Connect MIC! The YPAO microphone is not connected. Connect the YPAO microphone to the YPAO MIC jack on the front panel. Unplug HP! The headphones are connected. Remove the headphones.
CONNECTIONS Set up the speaker parameters automatically (YPAO) ■ Warning message W-1: OUT OF PHASE The speakers displayed are connected with the opposite polarity. Depending on the type of speakers you are using and the environment in which you have them installed, this message may occur even if the speakers are connected correctly. Depending on the type of speakers, “W-1” may display even if the speakers are connected correctly.
PLAYBACK CODE SET TRANSMIT SOURCE Basic playback procedure RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER FM AM PRESET INFO MEMORY MOVIE MUSIC 1 2 Turn on external components (TV, DVD player, etc.) connected to this unit. Turn on this unit and select the input source using dInput selector. The name of the selected input source is displayed for a few seconds.
PLAYBACK Changing input settings with a single key (SCENE function) CODE SET TRANSMIT SOURCE RECEIVER SLEEP This unit has a SCENE function that allows you switch this unit on and change input sources and sound field programs with one key. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING TUNER FM AM INFO MEMORY Four scenes are available for different uses, such as d playing movies or music.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 AV 1 2 3 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER (Straight decoding mode) Press gSTEREO repeatedly Use straight decoding mode when you want to playback sound without sound field processing. You can playback as follows in straight decoding mode. Selects compressed music enhancer: 2-channel sources such as CD Press gSTEREO repeatedly Stereo sound plays through the front left and right speakers.
PLAYBACK Enjoying sound field programs CODE SET TRANSMIT SOURCE ■ Enjoying sound field programs RECEIVER SLEEP without surround sound speakers HDMI 1 2 3 4 3 4 This unit allows you to use virtual surround speakers to enjoy sound field surround effects, even without any surround speakers (Virtual CINEMA DSP mode). You can even enjoy surround sound presence with just a minimal configuration of the front speakers only.
PLAYBACK Enjoying sound field programs Sound field programs Action Game This sound field is suitable for action games such as car racing and FPS games. It uses reflection data that limits the effects range per channel in order to offer a powerful playing environment that makes the listener feel as if they are right there by enhancing various effects tones while maintaining a clear sense of directions. Roleplaying Game This sound field is suitable for role-playing and adventure games.
PLAYBACK Enjoying sound field programs ■ Category: STEREO Suitable for listening to stereo sources. 2ch Stereo Use this program to mix down multi-channel sources to 2-channels. When multi-channel signals are input, they are down mixed to 2-channels and output from the front left and right speakers. 7ch Stereo Use this program to output sound from all speakers. When you playback multi-channel sources, this unit down-mixes the source to 2-channels, and then outputs the sound from all speakers.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP HDMI 1 2 3 4 3 4 When using the FM/AM tuner, adjust the direction of the FM/AM antenna connected to this unit to get the best reception. AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER e FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 3 HDMI 1 2 3 4 1 2 3 4 5 6 1 2 V-AUX [ A ] [ B ] DOCK AV AUDIO TUNER FM AM INFO MEMORY PRESET TUNING ENHANCER SUR. DECODE MOVIE MUSIC STEREO STRAIGHT DIRECT Use eTUNING H / I to set a frequency to receive. eTUNING H Increases the frequency. Press and hold this key for longer than a second to search automatically for a station d on a higher frequency than the current one. J1 e eTUNING I Decreases the frequency.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 4 HDMI 1 2 3 4 4 AV 1 2 3 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING AUDIO TUNER FM AM INFO MEMORY MOVIE MUSIC e Press jENTER, then press ePRESET F / G or jCursor B / C to choose the present number from which to start the Auto Preset function. Auto Preset will begin approximately 5 seconds after you select a preset number.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE Recalling a preset station RECEIVER SLEEP Clearing preset stations Radio Data System tuning (U.K. and Europe models only) HDMI 1 2 1 2 3 4 3 4 You can call preset stations registered by automatic station preset or manual station preset. J1 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING To select a registered station, press ePRESET d F / G to select the preset number of the station.
PLAYBACK FM/AM tuning CODE SET TRANSMIT SOURCE RECEIVER SLEEP 2 HDMI 1 2 3 4 1 2 3 4 5 6 1 2 V-AUX [ A ] [ B ] DOCK AV Press fINFO repeatedly until the desired information is displayed. Frequency Information on the display changes as you press the key. The kind of information is displayed for a while and then the information is displayed. J1 AUDIO Program Service FM AM INFO MEMORY MOVIE MUSIC PRESET Program Type VOL. SW C R L SL SR SBL SBR READY VOL.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE RECEIVER SLEEP Once you have connected a Yamaha iPod universal dock (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound field programs (☞p. 34) to give compressed audio formats such as MP3 a sharper, more dynamic sound.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE ■ Playing only iPod/iPhone audio RECEIVER SLEEP through the unit (Simple play mode) HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK Use the following remote control keys to operate (playback, stop, skip, etc.) your iPod/iPhone. You can d check song information on the iPod/iPhone screen.
PLAYBACK Playing back tunes from your iPod™/iPhone™ CODE SET TRANSMIT SOURCE ■ Shuffle/Repeat playback RECEIVER SLEEP You can use special playback functions such as shuffle playback and repeat playback by first displaying the Option menu. HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK d TUNER FM AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can connect a Yamaha Bluetooth wireless audio receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible portable music players. J1 HDMI 1 2 3 4 3 4 AV 1 2 AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING NOTE d TUNER FM AM INFO MEMORY e ENHANCER SUR.
PLAYBACK Playing back tunes from Bluetooth™ components CODE SET TRANSMIT SOURCE Using Bluetooth™ components RECEIVER SLEEP HDMI 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM INFO MEMORY PRESET When pairing is complete, carry out the following procedure to achieve a wireless connection between this unit and the Bluetooth component. When the wireless d connection is complete, you playback from Bluetooth components.
SETUP CODE SET TRANSMIT SOURCE Configuring the settings specific for each input source (Option menu) RECEIVER SLEEP HDMI 1 2 3 4 4 This receiver has a unique option menu specific for each type of input source, such as volume trim for compatible input sources, audio/video data display for signals from playback devices, and other frequently used menu items.
SETUP Configuring the settings specific for each input source (Option menu) ■ Adjusting volume between input sources Volume Trim Input source: ■ Selecting the 5.1-channel signal playback method Extended Surround All Reduces any change in volume when switching between input sources by correcting volume differences in each input source. You can adjust this parameter for each input source. Adjustable range -6.0 dB to 0.0 dB to +6.0 dB Default setting 0.0 dB Adjustment increments 0.
SETUP Configuring the settings specific for each input source (Option menu) ■ Combining HDMI/AV1-2 input source video and audio Audio In Input source: HDMI1-4, AV1-2 Combines video from HDMI or AV input sources with analog/ digital audio inputs in situations such as: – an playback device is connected with an HDMI cable but cannot transmit audio through HDMI – an playback device with component video output and analog audio output (such as certain game consoles) are connected to the system • For details
SETUP Configuring the settings specific for each input source (Option menu) ■ Changing FM mode (Stereo/Monaural) FM Mode Input source: ■ Shuffle playback with iPod/iPhone Shuffle TUNER Sets this unit to automatically match FM broadcast frequencies in stereo, or to convert the frequency to monaural (☞p. 36). ■ Automatically presetting FM radio stations Auto Preset Input source: DOCK (iPod) Changes the shuffle playback style on iPod (☞p. 42).
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE RECEIVER SLEEP You can configure various function settings of this unit using the Setup menu. HDMI 1 2 3 4 3 4 AV 1 2 Setup menu display and settings AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING You can view the operations of Setup menu on the front panel display or on the OSD (On-Screen Display) displayed on your TV while you use it. This explanation uses references to the OSD display on your TV.
SETUP Setting various functions (Setup menu) Setup menu items Manages settings for speakers ■ Manual speaker setup Config Setup menu ;Speaker Setup Speaker Setup Config [ ]/[ ]:Up/Down [ENTER]:Enter [ (speakers) Level (unit and speakers) Distance Equalizer (speakers and frequency bands) Test Tone Sound Setup HDMI Auto Lipsync Auto Delay Adaptive DRC Manual Delay Dynamic.Range Max Volume Init.
SETUP Setting various functions (Setup menu) Front SP Selects the size (sound reproduction capacity) of the front speakers. J1 Small (Default) Large Select this for small speakers. The subwoofer will produce front channel low-frequency components. J2 Select this for large speakers. The front speakers will produce all of the front channel frequency components. Center SP Selects the size of the center speakers. None Sur.B L/R SP Selects the size of the surround back speakers.
SETUP Setting various functions (Setup menu) ■ Controlling the volume of each speaker Level ■ Manually setting speaker distance Distance Separately adjusts the volume of each speaker. Use jCursor B / C to select the desired speaker and adjust the volume with jCursor D / E. ■ Adjusting sound quality with the equalizer Equalizer Adjusts the timing at which the speakers produce audio so that sounds from the speakers reach the listening position at the same time. Selecting adjustment units FR.
SETUP Setting various functions (Setup menu) ■ Generating test tones ■ Adjusting the graphic equalizer 1 2 When “EQ Type Select” is displayed, use jCursor D / E to select “GEQ” and press jENTER. Check that “Channel” selects and use jCursor D / E to select the speaker for which you want to adjust the equalizer. ;Equalizer . Channel;;;;Front L 63Hz ;;;;;;||;;;;;; 0dB 160Hz ;;;;;;||;;;;;; 0dB 400Hz ;;;;;;||;;;;;; 0dB 1kHz ;;;;;;||;;;;;; 0dB 2.5kHz ;;;;;;||;;;;;; 0dB 6.
SETUP Setting various functions (Setup menu) . ;Lipsync ;Adaptive DRC ;Dynamic Range ;Max Volume ;Init.Volume Lipsync Adjusts the delay between audio and video output (Lipsync function). HDMI Auto When connecting to a TV via HDMI, automatically adjusts output timing if the TV supports an automatic lipsync function. Off (Default) [ p [ ]/[ ]:Up/Down [ENTER]:Enter Sound Setup submenu On Lipsync Adjusts the delay between video and audio output.
SETUP Setting various functions (Setup menu) ■ Auto-adjusting Dolby Digital and DTS dynamic range Dynamic Range Selects the dynamic range adjustment method for audio bitstream (Dolby Digital and DTS) signal playback. Min/Auto Setting HDMI functions Init.Volume Sets the initial volume for when this receiver is turned on. When this parameter is set to “Off,” the volume is set at the level when the receiver last entered standby mode. J1 Off, Mute, -80 dB to +16.
SETUP Setting various functions (Setup menu) ■ Receiver operation via TV (HDMI Control) Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (ex. Panasonic VIERA Link), you can use the remote controls of those devices to operate some of this unit’s functions, and to synchronize this unit with the operation of those devices.
SETUP Setting various functions (Setup menu) ■ Changing the output destination of HDMI input audio signals Audio Output TV Amp+TV converted to HDMI Resolution Choose whether to playback audio from an external component such as a BD/DVD player connected via HDMI through this unit or through a TV. Amp (Default) ■ Setting resolution of analog video signals Sets the resolution during up-scaling (when analog video input is converted to HDMI video). Thrgh (Default) No up-scaling.
SETUP Setting various functions (Setup menu) CODE SET TRANSMIT SOURCE Making the receiver easier to use RECEIVER SLEEP HDMI 1 2 3 4 3 4 AV 1 2 ;Function Setup AUDIO 6 1 2 V-AUX [ A ] [ B ] DOCK PRESET TUNING . ;Input Rename ;AutoPowerDown ;Dimmer ;OSD Shift TUNER AM MEMORY MOVIE MUSIC [ ]/[ ]:Up/Down [ENTER]:Enter p FM INFO [ 5 2 3 Select the input source that you want to rename using jCursor B / C.
SETUP Setting various functions (Setup menu) ■ Goes enter standby mode automatically when you leave it without operating AutoPowerDown display Off (Default) Auto Power Down function is disabled. 4hours Goes into standby mode, when you have not operated this unit for four hours. 8hours Goes into standby mode, when you have not operated this unit for eight hours. Goes into standby mode, when you have not operated this unit for twelve hours.
SETUP Setting sound field program parameters CODE SET TRANSMIT SOURCE RECEIVER SLEEP Although the sound field programs would satisfy you as they are with the default parameters, you can arrange the effect by setting the sound field elements (parameters). To adjust the sound effects suitable for acoustical conditions of audio/video sources or rooms, perform the following operations.
SETUP Setting sound field program parameters CINEMA DSP parameters Parameters usable in certain sound field programs SUR. Selects a surround decoder to be used with a sound field program in the MOVIE category. J1 Dolby PLIIxMovie (Dolby PLII Movie) Selects the Dolby Pro Logic IIx Movie (or Dolby Pro Logic II Movie) decoder. Neo:6 Cinema Selects the Neo:6 (Cinema) decoder.
SETUP Setting sound field program parameters Parameters usable in surround decoder When Neo:6 Music is selected Dolby PLIIx Music and Dolby PLII Music only Adjusts the front left and right channel output relative to the center channel to make the center channel more or less dominant as necessary. C.Image Panorama Adjusts the soundscape of the front sound field. Sends front left/ right channels sounds to the surround speakers as well as the front speakers for a wraparound effect.
SETUP CODE SET TRANSMIT SOURCE RECEIVER SLEEP b c You can operate an external component such as TV and DVD player with the remote control of this unit by setting the code for external component (remote control code). The remote control code can be set for each input source. Individual setting allows you to switch external components seamlessly depending on the selected input source.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP MI 1 2 1 2 3 4 3 4 d Registering remote control codes for external component operations AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNING MEMORY ENHANCER SUR.
SETUP Controlling other components with the remote control CODE SET TRANSMIT SOURCE n RECEIVER SLEEP Resetting all remote control codes HDMI 1 2 1 2 3 4 3 4 Resetting all remote control codes for external components to the initial factory settings. AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK AM INFO MEMORY MOVIE MUSIC PRESET TUNING ENHANCER SUR.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 1 2 Switch this unit to the standby mode. Press A while pressing and holding STRAIGHT on the front panel. Release the keys when “ADVANCED SETUP” is displayed on the front panel display.
SETUP Extended functionality that can be configured as needed (Advanced Setup menu) CODE SET TRANSMIT SOURCE n RECEIVER ■ To change the remote control ID SLEEP HDMI 1 2 1 2 3 4 3 4 Perform each of the following steps within 1 minute. Settings will be automatically stopped if more than 1 minute passes since the last operation. To reset, repeat from step 1.
SETUP Using the HDMI Control function This unit supports the HDMI Control function, which allows you to operate external components via HDMI. If you connect devices that support HDMI Control (ex. Panasonic VIERA Linkcompatible TVs, DVD/Blu-ray Disc recorders, etc.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV AUDIO 5 6 1 2 V-AUX [ A ] [ B ] DOCK TUNER FM AM PRESET MOVIE MUSIC When the HDMI Control (☞p. 68) is operating properly, the input source of this unit is automatically changed to match operations carried out on the TV. The default input jack is AV4. If the AV4 optical digital jack is connected to the TV’s audio output jack, then you can enjoy TV sound through this unit right away.
SETUP Using the HDMI Control function CODE SET TRANSMIT SOURCE ■ Single HDMI cable input to TV RECEIVER SLEEP 1 2 1 2 3 4 3 4 AV When using a TV that supports HDMI functions and Audio Return Channel function, audio/video output from this unit to the TV or audio output from the TV to this unit can be transmitted through a single HDMI cable (Audio Return Channel function). Audio signals transmitted from the TV to this unit can be assigned to any input source.
APPENDIX Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below, or if the instructions below do not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. General Problem Cause Remedy See page The power will not turn on. The protection circuitry operated 3 times consecutively.
APPENDIX Troubleshooting Problem No sound. No picture. Cause Remedy See page Incorrect input or output cable connections. Connect the cables properly. If the problem persists, the cables may be defective. 18 If a DVI-HDMI cable is used to connect the unit with an external component, then it is necessary to use an audio input jack for a different input to output audio. Display the HDMI Input Option menu for the connected cable, select “Audio In,” and select the jack to use for audio input.
APPENDIX Troubleshooting Problem No sound is heard from the surround speakers. Cause Remedy See page This unit is in straight decoding mode and a monaural source is being played back. Press STRAIGHT to exit straight decoding mode. 31 Sound may not be output from certain channels depending on input sources or sound field programs. Try another sound field program. 30 No sound is heard from the surround back speakers.
APPENDIX Troubleshooting HDMI™ Problem Tuner (FM/AM) Cause Remedy See page FM Problem The front panel display HDMI indicator is flashing. No picture or sound. (When using HDMI Control function) TV sound is not output from this unit when operating the remote control of the TV. An error with the HDMI connection has occurred. Try re-inserting the HDMI cable. — Confirm that HDMI video that is not supported by the unit is not being input (HDMI Input → Option menu → “Signal Info”).
APPENDIX Troubleshooting iPod™/iPhone™ AM Cause The desired station cannot be tuned into with the automatic tuning method. The signal is weak, or the antenna connections are loose. Adjust the AM loop antenna orientation. 23 Use the manual tuning method. 35 Automatic station preset does not work. Automatic station preset is not available for AM stations. Use manual station preset. 35 Continuous crackling and hissing noises are heard. The supplied AM loop antenna is not connected.
APPENDIX Troubleshooting Bluetooth™ Display Searching... Remote control Cause Remedy See page The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of pairing. — The Yamaha Bluetooth wireless audio receiver and the Bluetooth component are in the process of establishing a connection. — Completed The pairing is completed. — Canceled The pairing is canceled.
APPENDIX Glossary Audio information Audio and video synchronization (lip sync) Lip sync, an abbreviation for lip synchronization, is a technical term that involves both a problem, and the capability of maintaining audio and video signals synchronized during post-production and transmission. Whereas the audio and video latency requires complex end-user adjustment, HDMI version 1.
APPENDIX Glossary DSD Direct Stream Digital (DSD) technology stores audio signals on digital storage media, such as Super Audio CDs. Using DSD, signals are stored as single bit values at a high-frequency sampling rate of 2.8224 MHz, while noise shaping and oversampling are used to reduce distortion, a common occurrence with very high quantization of audio signals. Due to the high sampling rate, better audio quality can be achieved than that offered by the PCM format used for normal audio CDs.
APPENDIX Information on HDMI™ ■ HDMI signal compatibility NOTES Audio signals Audio signal types Audio signal formats Compatible media 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, Blu-ray Disc, HD DVD, etc. DSD 2/5.1ch, 2.8224 MHz, 1 bit SACD, etc. Bitstream Dolby Digital, DTS DVD-Video, etc.
APPENDIX Specifications ■ Input jacks ■ HDMI ■ Compatible Decoding Formats • Analog audio Audio x 5 (AV5, AV6, AUDIO1, AUDIO2, V-AUX) • HDMI Specification: Deep Color, “x.v.
APPENDIX ■ VIDEO SECTION ■ AM SECTION • Input Sensitivity/Input Impedance AV5, etc .....................................................................200 mV/47 kΩ • Video Signal Type [U.S.A., Canada, Korea and General models] ........................ NTSC [Other models] ........................................................................... PAL • Maximum Input Voltage AV5, etc. (1 kHz, 0.5% THD) .................................... 2.0 V or more • Video Conversion.................................
APPENDIX Index Numerics 5.1-channel speaker connection ................................................... 11 5.1-channel speaker layout........................................................... 10 6.1-channel speaker connection ................................................... 11 6.1-channel speaker layout........................................................... 10 7.1-channel speaker connection ................................................... 11 7.1-channel speaker layout..........................
APPENDIX Index Preset tuning................................................................................. 36 R Radio Data System tuning ........................................................... 38 Rear panel ...................................................................................... 6 Remote control............................................................................... 8 Remote control battery installation................................................
© 2010 Yamaha Corporation YC507B0/OMEN
