Owner's Manual

En 62
Standby Charge
Sets whether or not to charge an iPod connected to the iPod dock or iPod wireless
audio receiver while the unit is in standby mode.
Input sources
DOCK (iPod)
Settings
When iPod is connected to the unit with a USB cable, iPod cannot be charged while the unit is in standby
mode.
iPod Interlock (Interlock)
Sets whether operations for the iPod connected to the iPod wireless audio receiver are
in linked with operations for the unit.
Input sources
DOCK (iPod)
This setting is available only when the iPod wireless audio receiver is connected.
Power & Input (Pwr&Input)
Sets the operation for iPod related to the operation for the unit when adjusting the
volume level, such as being turned on and selecting the input source.
Settings
Volume
Sets whether the operation for iPod relates to the operation for the unit when adjusting
the volume level.
Settings
On (Default) Charges iPod when the unit is in standby mode.
Off Does not charge iPod when the unit is in standby mode.
Off Turns off the interlock function.
On (Default)
Turns on the interlock function. When starting playback with the iPod,
the unit is turned on, and then “DOCK” is selected as the input source.
When a few minutes pass after playback is stopped, the unit goes into
standby mode.
Off Turns off the interlock function.
On (Default)
Turns on the interlock function. When adjusting the volume level with an
iPod, the volume level of the unit is also adjusted.