OWNER'S MANUAL
10 Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
_'_,y_.._-...__',ilAvk"'llF, tlINl[e]Av[€ d) If the product the operating does not operate normally by following instructions.
2 3 4 5 6 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 13 To prevent damage by lightning, disconnect power cord from the wall outlet during an electrical storm. Install this unit in a well ventilated, cool, dry, clean place with at least 30 cm on the top, 20 cm on the left and right, and 10 cm at the back of this unit -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
CONTENTS ............................................................ FEATURES ............................................................. GETTING STARTED ............................................ 1 2 3 Checking the package contents ................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 Front panel ................................................................ Remote control ............................
Other features • 96-kHz/24-bit D/A converter Built-in 6-channel power amplifier • Minimum RMS output power (0.
Check your package Remote control to make sure it contains the following Batteries (4) (AAA, R03, UM-4) items. AM loop antenna Indoor FM antenna (U.S.A., Canada, China, Korea and General models) 75-ohm/300-ohm antenna adapter (U.K. model) (Europe, U.K.
tP tt @Y@AHA...................... I "J[ SPEA_RS ° I 1 (]_ STANDBY/ON O Turns this unit on, or set it to the standby mode. When you turn this unit on, you will hear a click and there will be a 4 to 5-second sound. delay before INPUT Selects this unit can reproduce (_ <_ / _> the input source you want to listen to or watch. VOLUME Controls the output level of all audio channels. This does not affect the OUT (REC) level.
I'[€]AVlI;{I]I_'Y;YAVlml;fI]AV[NI[I]AV[€ _) STEREO/EFFECT Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and right speakers. PROGRAM <1 / c> Selects the DSP program. _) PRESET/TUNING <1 / _> Selects preset station numbers 1 to 8 when the colon (:) appears in the front panel display.
This section describes their functions. before starting FEATURES" the remote Make control controls and sure that the AMP mode is selected operation. on pages See "REMOTE O 0 1 F SYSTEM rra rv:=n POWER POWER OVD CODE SET Used when setting up the manufacturer code (see page 47). O Input selector buttons Select the input source and set the remote control to operate the selected source component. O DSP program Select DSP programs for the AMP position.
_,Iel AVl I ; {el f..NPJ AVl Blf= I hV[_Jrl le] AV[€ STEREO/EFFECT Switches between normal stereo and DSP effect reproduction. When STEREO is selected, 2-channel signals are directed to the main left and right speakers without effect sounds and all Dolby Digital and DTS signals (except the LFE channel) are mixed down to the main left and right speakers. _) SET MENU Selects the SET MENU mode.
w*:.1,,u:_.le.'l:v,,I,i_ql, lq(Ni, _ I_ IIO0 PRO LOGC/] _f--_ oSILEhlTI @ _LBY_RO LO_ THTR 12ENTERTAINMENT US MOVIE _ ,--STEREOAUT_s_ TUNEO MEMORY_ _LUME...III vcolv_Aux o- cBL ovoMo,co-o TUNE. O Processor indicators Lights up when the title, (_ PROLOGIC/_) or _ ( 0o _]G_ _) STEREO indicator Lights up when this unit is receiving a strong signal tk_ran FM stereo broadcast while the "AUTO" indicator is lit. ), VIRTUAL, are activated.
This unit has been designed field quality right speakers, speaker, brands to provide with a 6-speaker system, rear left and right speakers, and a rear center speaker. of speakers system, to the following diagram when you place the speakers. a center Center speaker speaker (R) tonal qualities) Rear speaker in your (R) human voice and other types may not shift smoothly.
_u___v=_._,v,._-.-I,i, /- Be sure to connect the left channel (L), fight channel faulty, no sound will be heard from the speakers, will be unnatural and lack bass. • Use speakers with the specified • Do not let the bare speaker and/or impedance wires touch (R), "+" (red) and "-" (black) and if the polarity shown of the speaker If the connections is incorrect, are the sound on the rear panel of this unit. each other or any metal part of this unit. This could damage this unit the speakers.
"/i/=_ T;1=fii[-'/=il q Main B speaker Right Left Main A speaker Right Left Center speaker O ® ® O O ® ® ® G GI Subwoofer system I G -_ ® 0 Right Left Rear speaker Rear center speaker The diagram shows the speaker layout in the listening room. • SUBWOOFER jack using a subwoofer with built-in When connect the input jack of the subwoofer rear channels are directed to this jack effect) signals generated when Dolby SPEAKER SET selections.
___ v:_,_,v,,_-.-I, iq - • IMPEDANCE SELECTOR switch WARNING Do not change setting of the IMPEDANCE SELECTOR switch the unit. If this unit fails to turn on when STANDBY/ON SELECTOR switch may not be fully slid to either this unit is in the standby Select the switch position position.
• Connecting to digital jacks This unit has digital jacks digital signals through You can use the digital Do not connect mains this unit or other components power until all connections components between and DTS bitstreams. to the the have been completed. are made correctly, say L (left) to L, R (right) "-". Some methods When require different jack names. other YAMAHA (such as a tape deck, MD recorder changer), • connect to input PCM, Dolby To enjoy multi-channel etc.
II_qi'li'Pi_lPli'F Refer to the connection • • If your video component has an S-video output or component video output, connect the S-video signal output jack on the component to the S VIDEO jack or connect the component video signal output jacks on the component to the COMPONENT VIDEO jacks. • The AUDIO jacks are available for a video component which does not have optical digital output jack. However, multichannel reproduction cannot be obtained with audio signals input from AUDIO jacks.
_oJi'li'l=i_lpli'l_ OPTICA_ VCR 1 TV/digital OUTPUT I I I VIDEO OUTPUT _ y _AUDIO OUTPUT VIDEO OUTPUT VIDEO OUTPUT INPUT VIDEO I OPTIC_Ak OUTPUT DVD player i Video VIDEO I OUTPUT ! Game console or camcorder TV/ cable TV I OUTPUT PTICAL i monitor indicates signal direction __ indicates left analog _E_F indicates right analog _'_ indicates optical __ indicates video cables cables cables cables 15
II_qi'li'Pi_lNi'F • • The AUDIO jacks are available for an CD recorder or MD recorder which does not have optical digital input or output jack. Connecting a CD player Connect the coaxial to the DIGITAL digital INPUT output jack on your CD player CD jack. \It • The AUDIO jacks are available for a CD player which does not have coaxial digital output jack.
Both AM and FM indoor unit. In general, antennas these antennas are included should with this provide sufficient signal strength. Connect each antenna terminals. correctly • Connecting the AM loop antenna [] Set up the AM loop antenna, then connect it. to the designated (included) Indoor FM antenna (included) i [] Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals. l_J Orient the AM loop antenna for the best reception.
I[_qflfl=f_lPil'F If you want to increase the power output or want to use another amplifier, connect amplifier to the OUTPUT jacks to the speakers, an external as follows. • When RCA pin plugs are connected to the OUTPUT jacks for output to an external amplifier, signals are output from the SPEAKERS terminals as well.
_qi'li'Pi_lPli'l _ When all connections this unit. VOLTAGE SELECTOR are complete, turn on the power of 1 I (General model) • Connecting the AC power cord [] Plug in this unit to the wall outlet. • AC OUTLETS U.S.A., General (SWITCHED) Canada, China, Europe, Singapore models .............................................. U.K.
This unit has 6 SPEAKER configuration SET items on the SET MENU and their size. The following as well as other possible that you must set according table summarizes these SPEAKER to the number SET items, of speakers and shows in your the initial settings settings. If the initial settings shown in the following table are not appropriate for your speaker configuration, see "1 SPEAKER SET" on pages 41-43 to change the settings.
This section explains how to adjust using the test tone generator. complete, should the output and the various Dolby output level heard at the listening be the same from each speaker. tbr best performance Logic, speaker When this adjustment of the digital decoders Pro Logic (Dolby levels is position This is important sound Digital, field processor, Dolby Pro Use the test tone to balance the output levels of the speakers.
LEFT RIGHT *SUBWOOFERL% LEFT SURROUND RIGHT SURROUND "_J Adjust the level of the effect speakers using < / > so that it matches the level of the main speakers. While adjusting, the test tone is heard from the selected speaker. • To adjust the level of the main speakers, use VOLUME knob (or VOLUME +/- on the remote control). _1 When adjustment complete, REAR _ ENTER is press TEST TEST to __ stop the test tone. * Subwoofer speaker test tone is output after the rear left (LEFT SURROUND).
4 6 4 [] Press INPUT <1 / 1> repeatedly (one of the input selector buttons on the remote control) to select the input source. The selected input source name and input mode appear on the front panel display for a few seconds. MO/C_R iiiii_i_i_i_!i!iii_i_ii_ii_iiiii_iliiiiiiiiiiii_!_i:!_ _iliiii_iii_iiiiiiiiiiiiiiiii'!_!i!ii! iiiiiiiii%%i_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i 3 7 000 _iii_!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiil 6 ....
_1 Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. • BGV (background Adjust the volume to the desired level. The volume level is displayed digitally. Example: -70 dB Control range: VOLUME MUTE (minimum) to 0 dB (maximum) The volume level indicator also shows the current music while having beautiful on the video monitor. The BGV function from a video source.
+: :"+m++ ++++ ++ • This unit comes with a variety input jacks. the type of input signals you desire. Each time you turn on the power mode is set according the SET MENU • Notes on 96-kHz sampling You can select of this unit, the input to "8 INPUT MODE" setting on The digital input jacks digital signals.
You can enhance your listening experience by selecting a DSP program. For details about each program, see pages 29 to 33. After selecting the desired program, press the same button repeatedly to select the desired sub-program if available. Example: Pressing MOVIE THEATER 1 repeatedly switches the sub-program between "Sci-Fi" and "Spectacle".
• Selecting PRO LOGIC 11 You can enjoy the 2-channel six discrete program channels sources by selecting decoded into five or PRO LOGIC "_J Press SELECT repeatedly to select the decoder; PRO LOGIC or PRO LOGIC 11. lI in HAM No. 9. ROCK ENT_ JAZZCmB _E_ rAFNM_ _s_°_s__ SE_CT EX/ES STEREO _FECT _1 After selecting on the decoder (PRO LOGIC ]]), select source PROGRAM The selection PRO LOGIC <3/_> the mode by pressing appropriate for the 13O/DTS SUR.
• • Playing Dolby Digital Surround EX or DTS ES software Press EX/ES compatible to turn on the Dolby Digital SILENT CINEMA You can enjoy a powerful EX or DTS-ES by connecting The MATRIX indicator lights up. / while MQVI E indicator THTR ¢'r-,.,-..,". ,-.,- 'I ,- "3 r" ;:' =...=...= L...=._.:' r-.= L:.,', V_2/0VR VCR1 VAUX O _V/CBL DVD MD/CD_R TUNER The display changes AUTO --+ Matrixd. l --+ OFF each time the EX/ES button is pressed.
A sound field is defined particular space." early reflections produced as the "characteristic In concert and reverberations by the artist(s). other reverberations each venue its special reflections venues, as well as the direct The variations among sound halls and other music of a we hear sound in the early reflections the different music and recognizable venues and is what gives sound quality.
Filmmakers intend for the dialog even farther back, and the surround the images is an upgraded integrates the DTS, Dolby programs to provide CINEMA-DSP channels, right on the screen, around the listener. so the listener sound sound of YAMAHA and Dolby sound field programs, the effect Of course, YAMAHA's Digital signal surround sound a little farther all of these sounds designed sound comprehensive exclusive can enjoy realistic field program DSP specially Pro Logic field.
,tlil_t(_lP_T The 6-channel soundtracks found on 70-mm film produce using matrix processing. This unit's MOVIE THEATER localization that 6-channel soundtracks do. The built-in precise sound field localization and rich, deep sound without programs provide the same quality of sound and sound Dolby Digital or DTS decoder brings the professional-quality sound designed for movie theaters into your home.
• For movie programs: This unit automatically format. chooses No. 7 to 9 the appropriate decoder and DSP sound field pattern according to the input signal Table of Program Names for Each Input Format ut No. 7 8 9 Program _ MOVIE THEATER 1 2 Stereo channel MOVIE THEATER 2 5.1 channel DOLBY DIGITAL 6.
'//flqt_lPk-_," The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Select the DSP program that you feel sounds best regardless of the name and description given for it below. No. 7 Features Program MOVIE THEATER MOVIE THEATER Spectacle This program creates the extremely wide sound field of a 70-mm movie theater.
[] Press PRESET/TUNING automatic There are 2 ways to tune; automatic Automatic tuning strong and there • is effective Press [::> to tune in to a higher and manual. when station signals to tune in to a lower are vcm /_w tuning "= v_ux or press <1 _W/C_L _w "= h'i I,-i When frequency, frequency. is no interference. Automatic <1 / 1> once to begin tuning.
iqfllff• • Automatically presetting stations (for FM stations) You can use the automatic FIVl stations. This function automatically preset tuning feature enables this unit to tune in to FIVl stations to store with strong signals, and to store up to 40 (8 stations x 5 groups) of those stations in order. This feature enables you to easily tune in to any preset station by selecting number (see page 37).
Iliq¢llCf_ • Manually presetting "El Press stations PRESET/TUNING <1 / c> to select a preset station number (1 to 8) while the "MEMORY" indicator is flashing. Press I:> to select a higher preset station number. Press <1 to select a lower preset station number. You can also store up to 40 stations (8 stations x 5 groups) manually. PRESeV,TUn_NGE> !ii!ii!ii!ii!ii!ili1117111ii!i!!!iiiii! # vcr2/n_ vcm v Aux _r4/_k pro ............... 4 3 [] i": i:..,.':, i i ,,, "" ,,,) " II _ I"I _ivi ........
_qfllff• You can tune any desired station simply by selecting the preset station number under which it was stored. You can exchange The example exchanging the assignment below describes preset station of two preset the procedure "El" stations. for with "A5".
Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external component(s) connected to AC OUTLET(S). • Press SLEEP appears After a few seconds, "SLEEP" The sleep timer can only be set with the remote repeatedly on the front control. indicator to the previous \It until "SLEEP OFF" panel dis
Recording adjustments performed from the recording operation instructions and other operations components. are Refer to the for these components. 1 2 • Do a test recording before you start an actual recording. • When this unit is set in the standby mode, you cannot record between the components connected to this unit. • The setting of BASS, TREBLE, VOLUME, "5 L/R BALANCE" on the SET MENU and DSP programs does not effect the recorded material.
The SET MENU consists of 10 items including the speaker mode setting. Choose the appropriate item and adjust or select the values as necessary. \ll • Youcan adjust the items on the SETMENU while playing a Adjustment should be made with the remote control. source. Items Initial settings SPEAKER SET A CENTER B MAIN C REAR LR D REAR CT E BASS LRG (large) LARGE LRG (large) LRG (large) BOTH F MAIN Lv Nrm (Normal) 2 LFE LEVEL SP/HP 0 dB 3 SP DLYTIME CENTER REAR CNTR 0 ms 3 ms 4 D.
-'l:llt_l:li'la NI Press < / > repeatedly to change the setting of the item. Use this feature to select suitable output modes for your speaker configuration. l.'-I Press A/V repeatedly until the menu disappears or simply press one of the DSP program group buttons to exit SET MENU. _LL _K ENTER¸ aAZZCLU8C0NCEm TAI_MENT • When 96-kHz sampling digital signals are input to this unit, some items are not affected.
• 1B MAIN (main speaker Choices: LARGE, mode) • 1D REAR CT (rear center speaker mode) SMALL LARGE Select this if you have large main speakers. The entire range of the main left and right channel signal is directed to the main left and right speakers. SMALL By adding a rear center speaker to your speaker configuration, this unit can provide to-back and transitions.
-'l:lllt_l-ti'la • 1F MAIN Lv (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R), and rear center speakers with the main speakers because of unusually high-efficiency performance Choices: from the main Nrm (Normal), Use this feature to adjust the delay of the center and the rear center channel sounds. This feature works when there speakers. is sound output -10 dB like Dolby Nrm from the center speakers, Digital or DTS, etc.
I_'i:lllt)l-"li'l_ Use this feature is effective to adjust the dynamic range. only when this unit is decoding This setting Dolby Digital signals. It is possible to assign jacks according to be used if this unit's COMPONENT Choices: MAX, STD (standard), MIN (minimum) or DIGITAL names MAX Select the "MAX" for feature films. it possible connect for general use. remote MIN Select the "MIN" levels.
-'l:lllt_l-"li'la Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 25 for details about the input mode). Choices: AUTO, LAST AUTO Select this to allow this unit to automatically detect type of input signal and select the appropriate the input mode.
In addition to controlling manufacturers. • this unit, the remote To control Controlling other components, control can operate other A/V components you must set up the remote this unit • control made by YAMAHA with the manufacturer Controlling and other codes. other component The shaded areas below can be used to control this unit The shaded areas below can be used to control other when the AMP components. AMP mode. mode is selected.
;t:ll_[tJii:l[gt]AVli;{t]ll;]=r:|ll]:i_ You can control other components by setting a manufacturer code. Codes can be set tbr each of the 9 component controls. • The following table shows factory-set component (Library: component category) and the manufacturer code tbr each component control.
|;t:ll_[l_l:][I,il]iVll;{l]ll_r;|ll];t:[ You can operate " other components when you have set the manufacturer code for your component. Note, however, that some buttons may not operate your component. Once you select an input source, switches to the mode for operating the remote O SYSTEM control the component. pro _rv/ceL vAu× _ma_T 0©00 _ovc_l VCRa/D_O_[__..
You can adjust the output level of each effect speaker [] (center, rear left and right, rear center and subwoofer) while listening Adjustment Press < / > to adjust • The control to a source. should right speakers be made with the remote • The control to -20 dB. control. the speaker output level. range for the center or rear left and is from +10 dB to -10 dB.
You can adjust the time difference of the sound from the main the sound effect value, between speakers from the rear speakers. the later the sound time can be individually The following CONCERT 2. JAZZ 3. ROCK 4. DISCO HALL CLUB The delay delay time. 45 15 26 36 CONCERT VIDEO 21 5. TV SPORTS 10 6. MONO 69 7.
!!!! .... You can adjust the values of PRO LOGIC 1I Music parameters so the sound fields are recreated accurately in your listening room. Adjustments should be made with the remote • You cannot change parameter values when "10 MEM. GUARD" on the SET MENU is set to ON. Memory back-up The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby control. mode, the power outlet, or the power power failure.
Refer to the chart below when this unit does not function properly. If the problem below or if the instruction below does not help, set this unit to the standby contact the nearest authorized YAMAHA dealer or service center.
Problem Cause Remedy Refer to page The sound suddenly goes off. The protection circuit has been activated because of a short circuit, etc. Check the IMPEDANCE SELECTOR switch is set to the appropriate position and then turn this unit back on. Check the speaker wires are not touching and then turn this unit back on. Only the speaker on one side can be heard. No sound from the effect speakers. The sleep timer has functioned. Turn on the power, The sound is muted.
mi:_'lq:l_-'liPPiili'V Problem Cause Refer Remedy to page No sound center from the rear speaker. A "humming" can be heard. The volume sound level cannot be increased, or the sound is distorted. 42 "lC REAR LR" or "ID REAR CT" on the SET MENU is set m NON. Select LRG or SML. The Dolby Digital EX decoder or the DTS-ES compatible decoder is not on. Press the EX/ES turn it on. Incorrect Firmly connect the audio plugs. If the problem persists, the cables may be defective. cable connections.
• Tuner Problem Cause Remedy Refer to page FM stereo reception is noisy. The characteristics of FM stereo Check the antenna broadcasts may cause this problem when the transmitter is too far away or tile antenna input is poor. Use tile manual There FM is distortion, and good interference. FM 34 tuning method. Adjust the antenna position multipath interference. The station is too weak.
• Dolby Surround Dolby Surround to reproduce • uses a 4 channel realistic analog and dynamic left and right channels (stereo), recording sound effects: (monaural), and a rear channel effects (monaural). The rear channel within a narrow frequency range.
qq°J'_'_Yil' • Virtual CINEMA YAMAHA has developed algorithm that allows surround virtual effects DSP a virtual • CINEMA DSP you to enjoy DSP sound field even without any rear speakers transmitted by using rear speakers. It is even possible minimal to enjoy virtual 2-speaker system CINEMA DSP using a that does not include a center speaker. • PCM (Linear PCM) PCM is a signal format audio signal is digitized, using any compression.
AUDIO SECTION FM SECTION • Minimuln RMS Output Power for Main, Center, Rear, Rear Center 20 Hz to 20 kHz, 0.06% THD, 8 tl ....................................... 75 W 1 kHz, 0.06% THD, 8 tl ........................................................ 80 W • Tuning Range [U.S.A. and Canada lnodels] ............................ 87.5 to 107.9 MHz [Other models] .............................................. 87.50 to 108.00 MHz • DIN Standard Output Power [Europe model] 1 kHz, 0.7% THD, 4 _) ...................
LIST OF MANUFACTURER TV CODES ELECTRON EL1N 0941 1001 JVC (VICTOR) 0261, 0281, 0641, 0661, 0841 KAWASHO 0651, 0901 A TANDY 0941 ELTA 0331 ABEX 1151 EMERSON 00011 00211 0061, KAYPANI 1021 ADM1RA 1141 00711 00811 0091, KENWOOD 0361, 1031, 1111 ADVENTURA 1131 0111,0811,0821, KLOSS 0631, 0721, 1131 A1KO 1121 0831,0841,0851, KTV 0921, 0941, 1011, 1051, 1111 A1WA 1481 AKA1 0331, 0861, 0871, 0901, 0921, 0941, 0981, LEYCO ALBA 0431 1011, 1031, 1051, L
SONTEC1001 CABLE TV SONY 0371,0451,0661, (!256, (!376 0841, 0951, 1281,ABC ANTRONIX 0136 1441 0136, 0286 SOUNDESIGN 0861, 0961, 1051,ARCHER BBT 0076 1091 CABLETIME 0166 SOUNDWAVE 1001 CABLEV1SION 0196 SPECTRICON 1161 COLOUR VOICE 0306, 0346 SQUAREVIEW 0481 0216, 0276 SSS 1031, 1051 COMTRONICS EAGLE COMTRON1CS STAR-L1TE 1051 0276 SUPREM0951 EASTERN 0066 SUPRE-MACY 1131 0206 SURPA 0351,0971 ELECTRICORD SYLVANIA 0101, 0361, 0441,ELECTUS 0266 0116, 0126 0581, 0591, 0601,GE 0611, 0631, 0961,GEC CABLE SYSTEM 0196
MULTITECH 0852, NAD 0442 0992 NEC 0122, 0202, 0292, 0422, 0432, 0542, TEAC 0992 TECHNICS 0932 TEKNIKA 0322, 0632 TELEFUNKEN 0252 0912 TMK 0212, NOBLEX 0922 OLYMPUS 0412, 0932 OPT1MUS 0442, 0472, 0912 OPTONICA 0402 ORION 0212, 0722, 0742, 0062, 0302, 0342, 0622, 0682, 0712, 0922 TOSHIBA 0762 0772 UNITECH 0922 OSAKI 0912 VECTOR PANASONIC 0012,0052,0092, 0372, 0382, 0392, 0412, 0932 0202, 0432, 0602, 0632, 0692, 0912, 0922, PENTAX 0592, PERDIO
TAPE DECK AIWA AKAI CARVER DENON FISHER GARRARD JVC (VICTOR) KENWOOD MAGNAVOX MARANTZ MITSUBISHI OPTIMUS ONKYO PHILIPS PIONEER REVOX SANSUI SHARP SHERWOOD SONY TEAC TECHNICS WARDS YAMAHA IV 0094,0214,0224 0184 0094 0304 0144 0194,0204 0274,0284,0294 0124,0134,0154, 0234,0244,0264 0094 0094,0344 0184 0034,0064,0204, 0334 0364,0374 0094 0034,0044,0064 0354 0094,0344 0264 0334 0054,0084,0324 0194,0254 0074,0314 0034 0004,0014,0104, 0114,0164,0174, 0264
OYAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN SEI HAMBURG, RR. OF GERMANY ELECTRONIQUE FRANCE S.A. RUE AMBRO]SE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 R]CKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND SCANDINAVIA A.