Manual

Main A speaker Rear speaker
Right Left Right Left
o 0
Center
Subwoofer Right Left speaker Rear center
system Main B speaker speaker
MAIN SPEAKERS terminals
You can connect up to two speaker syslems to these
lerminals. When using only one speaker system, connect
it to either of 1he MAIN A or the MAIN B terminals.
REAR SPEAKERS terminals
A rear speaker system can be connected to these
terminals.
CENTER SPEAKER terminals
A center speaker can be connected to these terminals.
\\
\
REAR CENTER SPEAKER terminals The diagram shows the speaker layout in the listening
A rear center speaker can be connected to these terminals, room.
SUBWOOFER jack
When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,
connect the input jack of the subwoofer system to this jack. This unit will direct low bass signals distribuled from the
main, cenler and/or rear channels to this jack in accordance with your SPEAKER SET selections. The LFE (low-
frequency effect) signals generaled when Dolby Digital or DTS is decoded are also directed to this jack in accordance
with your SPEAKER SET selections.
• The Cut-off frequency of the SUBWOOFER jack is 90 Hz.
• It" you do not use a subwoofer, allocate the signals to the main left and right speakers by changing the setting of "SOUND 1
SPEAKER SET" item "IE BASS" on the set menu to MAIN.
• Use the control on the subwoofer to adjust its volume level You can also adjust the volume level by using this m_it's remote control
(see "SETTING THE SPEAKER LEVELS" on page 48).
I
17