Manual

'./IIV.,| _ _y.*T_/
[] Start playback or select a broadcast station
on the source component.
Refer to the operation inslructions for the
component.
[] Adjust the volume to the desired level.
The volume level is displayed digitally.
Example: -70 dB
Control range: VOLUME MUTE (minimum) to
0 dB (maximum)
The volume level indicalor also shows the current
volume level as a bar graph.
Front panel Remote control
If desired, use CONTROL and BASS/TREBLE -/+.
These conlrols only effect the sound from the main
speakers.
Front panel
• If you increase or decrease the higb-frequency or the low-
frequency sound to an extreme level, the tonal quality from the
center and rear speakers may not match that of the main left
and right speakers.
• If you have connected a recording component to the VCR
OUT, or MD/CD-R OUT jacks, and you notice distortion or
low volume during playback from other components, tEN
turning the recording component on.
[] Select a DSP program if desired.
Use PROGRAM <3 / [::>(DSP program buttons on
the remote control) to select a DSP program. See
pages 28 - 30 for details about DSP programs.
When using the remote conlrol, press AMP before
selecting a DSP program.
Front panel Remote control
• BGV (background video) function
The BGV function allows you to view images from a
video source together with sounds from an audio source.
For example, you can enjoy lislening to classical music
while watching beautiful scenery from a video soume on
the video monitor.
Select a source from the video group, then select a source
from the audio group using the input selector buttons on
the remote control.
(D
• To mute the sound
Press MUTE on the
remote control.
"Ib resume audio output, press
MUTE again.
..4.:
• You can change the amount by which the unit reduces the
volume in "OPTION 3 AUDIO MUTE" in the set menu.
• You can also cancel mute by pressing VOLUME +/--, etc.
• During muting, the MUTE indicator flashes on the front panel
display.
• Night listening mode
This mode reproduces dialogue clearly while reducing the
volume of loud sound effects for easier listening at low
volumes or at night.
Press NIGHT on the
remote control.
Press NIGHT once more to
return to normal reproduction.
NK_hT
• Setting the unit in standby mode cancels night listening mode.
..4.:
• You can use night listening mode with any of tbe sound I]eld
programs.
• The N1GHT indicator on tbe front panel display lights when
the unit is in night listening mode.
• Night listening mode may vaJ2/in efl?ctiveness depending on
the input souree and s_rround sound settings you use.
• When you have finished using this unit
Press STANDBY/ON (STANDBY on the
remote control) to set this unit in standby
mode.
STANDB_
or
Front panel Remote control
|
23