Owner's Manual

22
■ Playing video sources in the background
You can combine a video image from a video source with
a sound from an audio source. For example, you can
enjoy listening to classical music while having beautiful
scenery from the video source on the video monitor.
Use the input selector buttons to select a video source,
then select an audio source.
■ To mute the sound
Press MUTE on the
remote control.
“MUTE” blinks on the front
panel display.
To resume audio output, press
MUTE again.
y
• You can also cancel mute by pressing VOLUME +/–, etc.
• You can adjust the muting level (see page 44).
■ Night listening mode
This mode reproduces dialogue clearly while reducing the
volume of loud sound effects for easier listening at low
volumes or at night.
Press NIGHT on the
remote control.
The NIGHT indicator in the
front panel display lights up.
Press NIGHT once more to
return to normal reproduction.
y
• You can use night listening mode with any of the sound field
programs.
• Night listening mode may vary in effectiveness depending on
the input source and surround sound settings you use.
■ When you have finished using this unit
Press STANDBY/ON (POWER on the remote
control) to set this unit in standby mode.
7 Select a sound field program if desired.
Use PROGRAM l / h (PROG –/+ on the remote
control) to select a sound field program. See pages
27 – 30 for details about sound field programs.
■ Selecting the 6CH INPUT
Press 6CH INPUT until “6CH INPUT” appears on the
front panel display.
Note
• If “6CH INPUT” is shown on the front panel display, no other
source can be played. To select another input source, first
press 6CH INPUT so that “6CH INPUT” disappears from the
front panel display.
PLAYBACK
STANDBY
/ON
or
Front panel Remote control
or
Front panel Remote control
PROGRAM
PROG PROG
MUTE
TUNER
CD MD/CD-R V-AUX
DVD D-TV/CBL VCR
MUTE
NIGHT
POWER
6CH INPUT
Remote control
Front panel
or
6CH IN
HTR-5730_WD06090_EN.p65 1/19/04, 8:31 PM22