Owner's Manual

46
EDITING SOUND FIELD PARAMETERS
Changing parameter settings
The initial sound field program settings will provide you
with an excellent listening experience as they are. But you
can create an original listening environment by altering
some settings.
Note
• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
1 Select the sound field program you want to
adjust.
2 Press u / d to select the
parameters.
3 Press – / + to change the
parameter value.
4 Repeat steps 1 – 3 if you wish to alter other
parameters.
Note
• You cannot change parameter values when “OPTION 2 MEM.
GUARD” is set to “ON”. If you want to change the parameter
values, set “OPTION 2 MEM. GUARD” to “OFF” (see page
44).
TEST
PROG PROG
STEREO
LEVEL
SET MENU
MUTE
VOLUME
VOLUME
3
2
1
PROG PROG
MUTE
HTR-5730_WD06090_EN.p65 1/19/04, 8:33 PM46