01EN_HTR-5930_U_cv-1.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS d) 20 21 22 23 If the product does not operate normally by following the operating instructions.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
CONTENTS FEATURES............................................................. 2 GETTING STARTED............................................ 3 Supplied accessories .................................................. 3 Installing batteries in the remote control ................... 3 CONTROLS AND FUNCTIONS ......................... 4 ADVANCED OPERATION SET MENU ............................................................52 Using SET MENU................................................... 53 SOUND MENU.......
FEATURES FEATURES Built-in 5-channel power amplifier Sophisticated AM/FM tuner ◆ Minimum RMS output power ◆ 40-station random and direct preset tuning ◆ Automatic preset tuning ◆ Preset station shifting capability (preset editing) [U.S.A. and Canada models] (0.9% THD, 1 kHz, 8 Ω/6 Ω) Front: 110 W + 110 W Center: 110 W Surround: 110 W + 110 W [Other models] (0.
GETTING STARTED GETTING STARTED INTRODUCTION Supplied accessories Check that you received all of the following parts. Remote control STANDBY POWER TV AV CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR POWER POWER Batteries (2) (AA, R06, UM-3) AM loop antenna V-AUX MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP TV + VOL + + CH VOLUME – – MUTE INPUT 2CH STEREO MUSIC – 1 2 MUTE STANDARD 5 ENTERTAIN 3 A SPEAKERS B 9 4 0 7 8 NIGHT STRAIGHT +10 ENT.
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel Note The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, XM, CATEGORY, PRESET/TUNING/CH l / h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source. For details, see “XM Satellite Radio controls and functions” on page 42.
CONTROLS AND FUNCTIONS A PHONES jack Outputs audio signals for private listening with headphones. INTRODUCTION Notes • When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or at the SPEAKERS terminals. • All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels. B SPEAKERS Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel. C STRAIGHT Turns the sound field programs off or on.
CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 57. Note The XM Satellite Radio controlling functions in the following buttons (BAND, MEMORY, SRCH MODE, DISPLAY, cursor buttons u / d / j / i, numeric buttons and ENT.) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source.
CONTROLS AND FUNCTIONS E MUTE Mutes the audio output. Press again to restore the audio output to the previous volume level. The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. G NIGHT Turns on or off the night listening mode. 30º H SET MENU Enters “SET MENU”. 30º INTRODUCTION F STRAIGHT Turns the sound field programs off or on.
CONTROLS AND FUNCTIONS Front panel display Note The XM indicator is only applicable to the U.S.A. model and lights up only when “XM” is selected as the input source. For details, see “Basic XM Satellite Radio operations” on page 44. 1 23 4 VCR VIRTUAL SILENT CINEMA STANDARD DIGITAL NIGHT V-AUX DTV/CBL 5 DVD TUNER CD AUTO TUNED STEREO MEMORY MUTE VOLUME SP AB HiFi DSP PL XM SLEEP ft PL PCM 8 MD/CD-R 6 7 dB 9 0 A B C D E dB L C R LFE SL SR F G H I J K (U.S.A.
CONTROLS AND FUNCTIONS Rear panel 2 XM 3 MULTI CH INPUT AUDIO R 4 VIDEO L 5 TUNER COMPONENT VIDEO Y PB INTRODUCTION 1 IMPEDANCE SELECTOR PR DVD FRONT DVD 3 AM ANT DTV/ CBL DTV/ CBL SURROUND DIGITAL INPUT A DVD B GND CENTER SUB WOOFER VCR FM ANT C V-AUX SPEAKERS COAXIAL OPTICAL DTV/CBL 2 1 R OUT R A FRONT L B MONITOR OUT VCR IN (PLAY) DVD CLASS 2 WIRING IN CD FRONT SURROUND L CENTER R L MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT (U
CONNECTIONS CONNECTIONS ■ Front speakers (FL and FR) Placing speakers The speaker layout below shows the standard ITU-R* speaker setting. You can use it to enjoy CINEMA DSP and multi-channel audio sources. * ITU-R is the radio communication sector of the ITU (International Telecommunication Union). FL C FR SL SR 80˚ SR ■ Subwoofer (SW) FR SW SR C SL 1.8 m (6 ft) 10 The center speaker is for the center channel sounds (dialog, vocals, etc.).
CONNECTIONS ■ Connecting to the FRONT A SPEAKERS terminals Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. 2 1 Red: positive (+) Black: negative (–) 3 CAUTION (U.S.A.
CONNECTIONS Front speakers (A) Right Left Surround speakers Right Left XM MULTI CH INPUT AUDIO R VIDEO L TUNER COMPONENT VIDEO Y PB 2 1 5 4 IMPEDANCE SELECTOR PR DVD DIGITAL INPUT DVD 3 FRONT DVD SURROUND DTV/ CBL A AM ANT DTV/ CBL B GND CENTER SUB WOOFER VCR FM ANT C V-AUX SPEAKERS COAXIAL OPTICAL DTV-CBL CD 2 1 R OUT R A FRONT L B MONITOR OUT VCR IN (PLAY) DVD CLASS 2 WIRING IN FRONT SURROUND CENTER R L L MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT
CONNECTIONS Information on jacks and cable plugs Audio jacks and cable plugs DIGITAL AUDIO R COAXIAL OPTICAL (White) (Red) (Orange) L R C AUDIO Left and right Coaxial analog audio digital audio cable plugs cable plug COMPONENT VIDEO Y PB PR VIDEO (Yellow) (Green) (Blue) (Red) O V Y PB PR Optical digital audio cable plug Composite video cable plug PREPARATION DIGITAL AUDIO L Video jacks and cable plugs Component video cable plugs ■ Audio jacks ■ Video jacks This unit has thre
CONNECTIONS ■ Connecting a DVD recorder/VCR Connecting video components Connect the audio signal input jacks of your video component to the VCR AUDIO OUT jacks of this unit. Then connect the video signal input jack of the video component to the VCR VIDEO OUT jack of this unit for picture recording. Connect the audio signal output jacks of your component to the VCR AUDIO IN jacks of this unit.
CONNECTIONS Audio out Cable TV or Satellite tuner O Video out Audio out V XM MULTI CH INPUT AUDIO R VIDEO L L R COMPONEN Y P DVD 3 DVD COAXIAL OPTICAL DTV/CBL DVD SURROUND DTV/ CBL B VCR C V-AUX IN CD MONITOR OUT VCR IN (PLAY) 1 DTV/ CBL CENTER SUB WOOFER 2 DVD A PREPARATION DIGITAL INPUT FRONT R OUT SURR MD/ CD-R OUT (REC) SUB WOOFER R MONITOR OUT L AUDIO OUTPUT L R L Audio out V R Audio in V Video in Video out DVD recorder or VCR Another video c
CONNECTIONS ■ Connecting to the COMPONENT VIDEO jacks You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connections. Note Be sure to connect your video source components in the same way you connect your video monitor to this unit. For example, if you connect your video monitor to this unit using a COMPONENT VIDEO connection, connect your video source components to this unit using the COMPONENT VIDEO connection.
CONNECTIONS ■ Connecting a CD recorder/MD recorder Connecting audio components Connect the output jacks of your CD player to the CD jacks of this unit. Connect the input jacks of your CD recorder or MD recorder to the MD/CD-R OUT (REC) jacks. Connect the output jacks of your CD recorder or MD recorder to the MD/CD-R IN (PLAY) jacks to play a source from your recording component.
CONNECTIONS Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. ■ Connecting the AM loop antenna 1 Set up the AM loop antenna. 2 Press down the tab of the AM ANT terminal. 3 Insert the one of the AM loop antenna lead wires into the AM ANT terminal. 4 Release the tab back to secure the wire.
CONNECTIONS Connecting the power cable Once all connections are complete, plug the power cable into the AC wall outlet. Power cable Turning on the power When all connections are complete, turn on this unit.
SETUP SETUP The “BASIC MENU” feature is a useful way to set up your system quickly and with minimal effort. 3 Press i to enter “1 SETUP”. y • If you wish to configure this unit manually using more precise adjustments, use the detailed parameters in “SOUND MENU” (see page 53). • Altering any parameters in “SETUP” resets all parameters manually adjusted in “SOUND MENU” (see page 53). • Initial settings are indicated in bold under each parameter. Using BASIC MENU – A-E/CAT.
SETUP 6 Press d to confirm your selection and then press j / i to select the number of speakers connected to this unit. 9 Press d to confirm your selection. – + ENTER A-E/CAT. – – + ENTER + ENTER A-E/CAT. PRESET/CH A-E/CAT. PRESET/CH Choice Display 2spk L C R SL SB SR Speakers Front L/R y The indicator of the speaker currently outputting the test tone flashes in the front panel display.
SETUP 12 Press j / i to adjust the balance between the front left and right speakers. – + ENTER A-E/CAT. PRESET/CH 13 Press d / u to select a speaker and then j / i to adjust the balance. Press i to increase the value. Press j to decrease the value. – – + ENTER + ENTER A-E/CAT. A-E/CAT. PRESET/CH PRESET/CH • Select “C” to adjust the balance between the front left and center speakers. • Select “SL” to adjust the balance between the front left and surround left speakers.
PLAYBACK PLAYBACK CAUTION Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
PLAYBACK 5 Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume to the desired output level. VOLUME + or VOLUME – 7 Press PROGRAM l / h on the front panel repeatedly (or press one of the sound field program selector buttons on the remote control repeatedly) to select the desired sound field program. The name of the selected sound field program appears in the front panel display. See page 31 for details about sound field programs.
PLAYBACK Additional operations ■ Listening with headphones using SILENT CINEMA SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 31). When activated, the SILENT CINEMA indicator lights up in the front panel display.
PLAYBACK ■ Selecting the input modes This unit comes with a variety of input jacks. Do the following to select the type of input signals you want to use. y • We recommend setting “INPUT MODE” to “AUTO” in most cases. • You can adjust the default input mode of this unit by using the “INPUT MODE” parameter in “INPUT MENU” (see page 55). ■ Adjusting speaker levels during playback You can adjust the output level of each speaker while listening to a music source.
PLAYBACK ■ Using the test tone Use the test tone to set speaker levels so that the volume from each speaker is identical when heard from your listening position. This is also possible when playing sources input at the MULTI CH INPUT jacks. 1 Press AMP on the remote control and then press TEST. The unit will output a test tone. AMP TEST RETURN MEMORY 2 Press u / d repeatedly to select a speaker to adjust. – + ENTER Notes • You cannot use the test tone if headphones are connected to the PHONES jack.
PLAYBACK ■ Displaying information about the input source FORMAT Signal format display. When this unit cannot detect a digital signal, it automatically switches to analog input. Display status: Analog, Digital, Dolby Digital, DTS, PCM, Unknown Digital You can display the format, sampling frequency, channel and bit rate of the current input signal. 1 2 Press one of the input selector buttons on the remote control to select the desired input source.
PLAYBACK ■ Using the sleep timer Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. Press SLEEP on the remote control repeatedly to set the amount of time. Each time you press SLEEP, the front panel display changes as shown below. ■ Playing video sources in the background You can combine a video image from a video source with sound from an audio source.
SOUND FIELD PROGRAMS SOUND FIELD PROGRAMS This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience. Notes • Choose a sound field program based on your listening preference, not merely on the name of the program.
SOUND FIELD PROGRAMS Sound field program descriptions Remote control button 2CH STEREO MUSIC Program Features 2CH STEREO Downmixes multi-channel sources to 2 channel or plays back 2-channel sources as they are. Concert Hall HiFi DSP processing. This program produces the excitement of a live concert hall. The Roxy Thtr HiFi DSP processing. The program reproduces the dynamic rock music environment of “The Roxy Theatre”, one of the hottest rock clubs in L.A.
SOUND FIELD PROGRAMS ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press AMP on the remote control and then STANDARD on the remote control repeatedly to select a decoder. AMP ■ Editing sound fields parameters You can enjoy good quality sound with the factory preset parameters.
SOUND FIELD PROGRAMS For 2CH STEREO: Direct DIRECT Function: 2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog sources. Choices: AUTO, OFF y • The “AUTO” setting bypasses the decoders and DSP processors only when “BASS” and “TREBLE” are set to 0 dB (see page 24). • When multi-channel signals (Dolby Digital and DTS) are input, they are downmixed to 2 channels and output from the front left and right speakers.
RECORDING RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • The settings of TONE CONTROL (see page 24), VOLUME, speaker levels (see page 26) and the sound field programs (see page 31) do not affect recorded material.
FM/AM TUNING FM/AM TUNING There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups).
FM/AM TUNING Manual tuning 3 If the signal received from the station you want to select is weak, tune into it manually. Press TUNING MODE so that the AUTO indicator disappears from the front panel display. TUNING MODE Note DISPLAY AUTO/MAN'L Manually tuning into an FM station automatically switches the tuner to monaural reception to increase the signal quality. (U.S.A.
FM/AM TUNING Automatic preset tuning 3 You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number. Press and hold MEMORY for more than 3 seconds. The preset station number as well as the MEMORY and AUTO indicators flashes.
FM/AM TUNING Manual preset tuning 4 You can also store up to 40 stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) manually. Press PRESET/TUNING/CH l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. • Press h to select a higher preset station number. • Press l to select a lower preset station number. (U.S.A.
FM/AM TUNING Selecting preset stations 2 You can tune into any desired station simply by selecting the preset station group and number under which it was stored. (U.S.A. model) Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) to select the desired preset station number (1 to 8). The preset station group and number appear in the front panel display along with the station band and frequency.
FM/AM TUNING Exchanging preset stations 3 You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”. Select preset station “A5” using A/B/C/D/E and PRESET/TUNING/CH l / h. “A5” and the MEMORY indicator flash in the front panel display. See “Selecting preset stations” on page 39. (U.S.A.
XM® SATELLITE RADIO TUNING XM® SATELLITE RADIO TUNING What is XM Satellite Radio? XM Satellite Radio is the satellite radio service with millions of listeners across the United States, broadcasting live daily.
XM® SATELLITE RADIO TUNING XM Satellite Radio controls and functions Note The following controls are available only when “XM” is selected as the input source. Press INPUT l / h on the front panel repeatedly so that “TUNER” is displayed in the front panel display and then press XM on the front panel repeatedly (or press TUNER on the remote control and then press BAND repeatedly) to select “XM” as the input source. ■ Front panel functions ■ Remote control functions (U.S.A.
XM® SATELLITE RADIO TUNING Activating XM Satellite Radio 2 To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure below to check your ID number, and then visit the website at “http://activate.xmradio.com/” or call “1-800-XM-RADIO (1-800-967-2346)” with a major credit card handy for signing up. y You can display the XM Satellite Radio reception level by using “XM ANT.” in “OPTION MENU” (see page 56). (U.S.A.
XM® SATELLITE RADIO TUNING Basic XM Satellite Radio operations 1 (U.S.A.
XM® SATELLITE RADIO TUNING Selecting the XM Satellite Radio search mode 3 You can search for the desired channel using one of the three search modes (All Channel Search, Category Search, and Preset Search modes). You can also enter the channel number directly to select the desired channel by using the Direct Number Access mode (see page 48).
XM® SATELLITE RADIO TUNING ■ Category Search mode (U.S.A. model) 3 VOLUME Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to change the channel category.
XM® SATELLITE RADIO TUNING ■ Preset Search mode Prior to selecting a preset channel in the Preset Search mode, you must preset XM Satellite Radio channels. For details, see “Setting XM Satellite Radio preset channels” on page 49. 3 Press CATEGORY on the front panel (or A-E/CAT. j / i on the remote control) repeatedly to change the preset channel group (A to E). y All preset channels (A1 to E8) recalls “001 Preview” by the initial factory setting. A/B/C/D/E or CATEGORY (U.S.A. model) – A-E/CAT.
XM® SATELLITE RADIO TUNING ■ Direct Number Access mode 3 CD MD/CD-R TUNER DVD DTV/CBL VCR SLEEP V-AUX 1 MULTI CH IN REC AUDIO DISC SKIP CODE SET AMP Press the numeric buttons on the remote control to enter the desired three-digit channel number. For example, to enter the number 123, press the numeric buttons as shown below.
XM® SATELLITE RADIO TUNING Setting XM Satellite Radio preset channels 2 You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 47. Press MEMORY on the front panel (or MEMORY on the remote control).
XM® SATELLITE RADIO TUNING 4 Press PRESET/TUNING/CH l / h on the front panel (or PRESET/CH u / d on the remote control) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display. Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number/name, category, artist name/song title) for the currently selected channel in the front panel display. (U.S.A.
XM® SATELLITE RADIO TUNING When the channel number/name is displayed: [040] Deep Tra When the channel category is displayed: Rock When the artist name/song title is displayed: Coldplay / Clo y BASIC OPERATION • The front panel display can indicate up to 14 alphanumeric characters at once.
SET MENU SET MENU You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ BASIC MENU Use this feature to set up your system quickly and with minimal effort (see page 20). ■ SOUND MENU Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system.
SET MENU Using SET MENU SOUND MENU Use the remote control to access and adjust each parameter. Use this menu to manually adjust any speaker settings. Notes AMP TV + + + VOL CH VOLUME – – MUTE INPUT 1 – MUTE 2CH STEREO MUSIC 1 2 STANDARD 5 ENTERTAIN MOVIE 3 4 5CH STEREO 6 A SPEAKERS B 9 0 7 8 NIGHT STRAIGHT +10 ENT. LEVEL SET MENU MENU TITLE 4 SRCH MODE BAND – TEST A-E/CAT.
SET MENU Surround left/right speakers 1C SURR Choices: LRG (large), SML (small), NON (none) • Select “LRG” if you have large surround left and right speakers. The entire range of the surround channel signals is directed to the surround left and right speakers. • Select “SML” if you have small surround left and right speakers. The low-frequency signals of the surround channel are directed to the speakers selected with “1D BASS”. • Select “NON” if you do not have surround speakers.
SET MENU ■ Dynamic range 4 D.RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals. Choices: MIN (minimum), STD (standard), MAX (maximum) Speaker SP D.R Adjusts the speaker compression. Headphone HP D.R Adjusts the headphone compression. • Select “MIN” if you regularly listen at low volume levels. • Select “STD” for general use.
SET MENU OPTION MENU Use this menu to adjust the optional system parameters. ■ Display settings 1 DISPLAY SET Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Choices: – 4 to 0 Control step: 1 • Press j to make the front panel display dimmer. • Press i to make the front panel display brighter. ■ Memory guard 2 MEM. GUARD Use this feature to prevent accidental changes to sound field program parameter values and other system settings.
REMOTE CONTROL FEATURES REMOTE CONTROL FEATURES In addition to controlling this unit, the remote control can also operate other audiovisual components made by YAMAHA and other manufacturers. To control other components, you must set up remote control with the appropriate remote control codes (see page 59). Controlling this unit, a TV, or other components ■ Controlling this unit ■ Controlling a TV Press AMP to control this unit. Press DTV/CBL to control your TV.
REMOTE CONTROL FEATURES ■ Controlling other components Once you set the appropriate remote control codes (see page 59), use the input selector buttons to select the component you want to control. Note that some buttons may not correctly operate the selected component. 1 Notes 2 POWER POWER TV AV CD MD/CD-R DVD DTV/CBL STANDBY POWER TUNER SLEEP VCR MULTI CH IN REC AUDIO *1 This button functions only when the original remote control of the component has a POWER button.
REMOTE CONTROL FEATURES Setting remote control codes 1 You can control other components by setting the appropriate remote control codes. You can set the remote control codes for each input source. For a complete list of available remote control codes, refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual. The following table shows the default component (Library: component category) and the remote control code for each input source.
TROUBLESHOOTING TROUBLESHOOTING Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center. ■ General Problem This unit fails to turn on or enters the standby mode soon after the power is turned on.
TROUBLESHOOTING Problem The sound suddenly goes off. Sound is heard from the speaker on one side only. Cause The protection circuitry has been activated because of a short circuit, etc. Remedy See page Check that the impedance selector setting is correct. 9, 11 Check that the speaker wires are not touching each other and then turn this unit back on. — The sleep timer has turned off this unit. Turn on this unit, and play the source again. — The sound is muted.
TROUBLESHOOTING Problem Cause Remedy See page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connected component is not set to output Dolby Digital or DTS digital signals. Make an appropriate setting following the operating instructions for your component. — “INPUT MODE” is set to “ANALOG”. Set “INPUT MODE” to “AUTO” or “DTS”. 26 A humming sound is heard. Incorrect cable connections.
TROUBLESHOOTING ■ Tuner Problem Cause FM stereo reception is noisy. FM AM ■ Remedy The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. See page Check the antenna connections. 18 Try using a high-quality directional FM antenna. — Use the manual tuning method. 36 There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference.
TROUBLESHOOTING ■ Remote control Problem The remote control does not work nor function properly. Cause See page Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. 7 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. — The batteries are weak. Replace all batteries.
RESETTING THE SYSTEM RESETTING THE SYSTEM Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the “SET MENU” parameters. • The initial factory settings are activated next time you turn on this unit. y To cancel the initialization procedure at any time without making any changes, press STRAIGHT repeatedly to select “CANCEL” and then press STANDBY/ON on the front panel. (U.S.A.
GLOSSARY GLOSSARY Audio information ■ Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel).
GLOSSARY Sound field program information Video information ■ CINEMA DSP ■ Component video signal Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is best felt in a theater having many speakers designed for acoustic effects. Since home conditions, such as room size, wall material, number of speakers, and so on, can differ so widely, it is inevitable that there are differences in the sound heard.
SPECIFICATIONS SPECIFICATIONS AUDIO SECTION FM SECTION • Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 Ω/6 Ω ............................................ 110 W [Other models] 1 kHz, 0.9% THD, 6 Ω ................................................... 100 W • Tuning Range [U.S.A. and Canada models] .......................... 87.5 to 107.9 MHz [Other models] ............................................ 87.50 to 108.
LIST OF REMOTE CONTROL CODES TV ADMIRAL AIWA 292, 293 294, 276, 283, 284 AKAI 295, 296 ALBA 296 AOC 297 BELL&HOWELL 292 BESTAR 298 BLAUPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BROCSONIC 297 BUSH 296 CLATRONIC 298 CRAIG 224 CROSLEX 225 CURTIS MATHIS 297, 226 DAEWOO 297, 298, 224, 227, 228 DAYTRON 239 DUAL 298 DWIN 293 EMERSON 297, 224, 239, 232 FERGUSON 223, 265, 266 FIRST LINE 298 FISHER 295, 233 FRABA 298 FUNAI 277, 278 GE 293, 297, 234, 235, 236 GOODMANS 296, 298, 223 GRUNDIG 229, 238, 249 HITACHI 297, 239
01EN_HTR-5930_U_cv-4.fm Page iii Monday, December 12, 2005 9:33 AM © 2006 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD.
