HTR-6030_G-cv.fm Page 1 Friday, January 19, 2007 4:12 PM G HTR-6030 © 2007 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit.
Contents Features ................................................................... 2 Getting started ........................................................ 3 Quick start guide .................................................... 4 PREPARATION Set menu.................................................................41 Using set menu ........................................................ 42 1 SOUND MENU.................................................... 43 2 INPUT MENU...............................
Features Features Built-in 5-channel power amplifier ◆ Minimum RMS output power [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) Front: 100 W + 100 W Center: 100 W Surround: 100 W + 100 W [Other models] (1 kHz, 0.
Getting started Getting started ■ Installing batteries in the remote control Check that you received all of the following parts. Remote control Batteries (2) (AAA, R03, UM-4) 1 AM loop antenna 3 RAV28 WJ40970 EU STANDBY POWER SCENE 1 CD 2 3 4 MD/CD-R TUNER DVD DTV/CBL MULTI CH IN DVR V-AUX VOLUME 2 MUTE A/B/C/D/E PRESET LEVEL INTRODUCTION ■ Checking the supplied accessories SLEEP MENU AUDIO SEL NIGHT Indoor FM antenna ENTER RETURN DISPLAY STRAIGHT FREQ/TEXT SUR.
Quick start guide Quick start guide The following steps describe the easiest way to enjoy DVD movie playback in your home theater. Video monitor Front right speaker In these steps, you need the following supplied accessories. Subwoofer Front left speaker Preparation: Check the items Surround right speaker ❏ Indoor FM antenna ❏ AM loop antenna The following items are not included in the package of this unit. Center speaker ❏ Speakers ❏ Front speakers ......................................
Quick start guide Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Step 1: Set up your speakers Front speakers Loosen SPEAKERS ANTENNA SURROUND R L CENTER Insert INTRODUCTION Place your speakers in the room and connect them to this unit.
Quick start guide Step 2: Connect your DVD player and other components 2 Connect the video cable to the composite video output jack of your DVD player and the DVD VIDEO jack of this unit.
Quick start guide 4 ■ For further connections • Using the other kind of speaker combinations ☞ P. 11 • Connecting a video monitor and DVD player ☞ P. 15 • Connecting a cable TV/satellite tuner and DVD recorder INTRODUCTION Connect the FM and AM antennas to this unit. See page 18 for the details. ☞ P. 15 • Connecting to the COMPONENT VIDEO jacks ☞ P. 16 Indoor FM antenna AM loop antenna • Using the VIDEO AUX jacks on the front panel ☞ P. 16 • Connecting a CD player and an MD recorder ☞ P.
Quick start guide Step 3: Turn on the power and press SCENE 1 button 1 Turn on the video monitor connected to this unit. 2 Press 1 STANDBY/ON on the front panel. 4 Start playback of the desired DVD on your player. 5 Rotate 8 VOLUME to adjust the volume. Note When you change the input source or sound field program, the SCENE mode is deactivated and the indicator on the SCENE button turns off. ■ Using the other SCENE buttons 3 Press F SCENE 1.
Quick start guide Case C: “I want to listen to a music program from the FM radio station...” Notes • To use the “Radio Listening” template, you must tune into the desired radio station in advance. See pages 34 to 36 for tuning information. • To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna. y ■ Customizing the SCENE templates • Using various SCENE templates ☞ P.
Connections Connections Rear panel 1 2 3 4 ANTENNA SPEAKERS SURROUND R L CENTER FRONT B R L COMPONENT VIDEO DTV/CBL DVD DVR MONITOR OUT AM PR GND VIDEO DIGITAL INPUT PB DVD DTV/CBL IN DVR OUT MONITOR OUT FM 75 OPTICAL CD 3 DTV/ CBL 2 Y MULTI CH INPUT FRONT SURROUND AUDIO DVD DTV/CBL IN DVR OUT OUTPUT CD IN MD/ OUT (PLAY) CD-R (REC) SUB WOOFER L 1 R COAXIAL DVD CENTER L R R FRONT A SUBWOOFER 5 6 7 8 L 9 1 COMPONENT VIDEO jacks See page 16 for connection
Connections Placing speakers The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multichannel audio sources. FL C FR FR SW 30˚ FL SR PREPARATION C SL SR SL 60˚ SL 80˚ SR 1.8 m (6 ft) Front left and right speakers (FL and FR) The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position.
Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • Use speakers with the specified impedance shown on the rear panel of this unit. • Before connecting the speakers, make sure that this unit is turned off. • Do not let the bare speaker wires touch each other or let them touch any metal part of this unit.
Connections ■ Connecting to the FRONT A terminals 2 1 Red: positive (+) Black: negative (–) 3 Loosen the knob. 2 Insert the bare end of the speaker wire into the hole on the terminal. 3 Tighten the knob to secure the wire. PREPARATION 1 Connecting the banana plug (except Europe, Korea and Asia models) The banana plug is a single-pole electrical connector widely used to terminate speaker cables.
Connections Information on jacks and cable plugs Audio jacks and cable plugs DIGITAL AUDIO DIGITAL AUDIO L R COAXIAL OPTICAL (White) (Red) (Orange) L R C AUDIO Left and right analog audio cable plugs Coaxial digital audio cable plug Video jacks and cable plugs COMPONENT VIDEO Y PB PR VIDEO (Yellow) (Green) (Blue) (Red) O V Y PB PR Optical digital audio cable plug Composite video cable plug Component video cable plugs ■ Audio jacks ■ Video jacks This unit has three types of au
Connections Connecting video components Connect the video components as follows. y Make sure that this unit and other components are unplugged from the AC wall outlets. You can also connect a video monitor, DVD player, digital TV, and cable TV to this unit using the COMPONENT VIDEO connection (see page 16).
Connections ■ Connecting to the COMPONENT VIDEO jacks ■ Connecting to the VIDEO AUX jacks on the front panel You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using COMPONENT VIDEO connection. Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit. Note Be sure to connect your video source components in the same way you connect your video monitor to this unit.
Connections Connecting audio components Connect the audio components as follows. ■ Connecting a CD player and a CD recorder/MD recorder Make sure that this unit and other components are unplugged from the AC wall outlets. Note When you connect your CD player via analog and digital connection, priority is given to the signal input at the DIGITAL INPUT jack.
Connections Connecting the FM and AM antennas Connecting the power cable Both FM and AM indoor antennas are supplied with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Once all connections are complete, plug the power cable into the AC wall outlet. Power cable Notes • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one.
Connections Front panel display 1 2 3 5 4 DVR t VIRTUAL ENHANCER V-AUX SP SILENT CINEMA NIGHT AB DTV/CBL 6 MD/CD-R DVD HiFi DSP TUNER 7 CD AUTO TUNED STEREO MEMORY PRESET PTY HOLD PS PTY RT CT EON SLEEP MUTE q DIGITAL q PL ft q PL 0 A B 1 Decoder indicator Lights up when any of the decoders of this unit functions. 2 ENHANCER indicator Lights up when the Compressed Music Enhancer mode is selected (see page 31).
Connections ■ Using the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation.
Basic setup Basic setup The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort. Notes 1 Press U MENU. “BASIC SETUP” appears in the front panel display. 4 . BASIC SETUP 2 3 SUBWOOFER .. YES Choices: YES, NONE • Select “YES” if you have a subwoofer in your system. • Select “NONE” if you do not have a subwoofer in your system. Press S ENTER to enter “BASIC SETUP”. “ROOM” appears in the front panel display.
Basic setup 6 Press S n to select “SET” and then S l / h to select the desired setting. SET 9 Press S ENTER to confirm your selection. • If you selected “YES” in step 8, the setup procedure is completed and the display returns to the top set menu display. • If you selected “NO” in step 8, the front speaker level adjustment display appears in the front panel display. 10 Press S k / n to select a speaker and then S l / h to adjust the balance.
SELECTING THE SCENE TEMPLATES Selecting the SCENE templates This unit is equipped with 12 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button: 2 Press D INPUT l / h (or S l / h) to select the desired template.
Selecting the SCENE templates ■ Which SCENE template would you like to select? Which source do you like to play back? Video sources (DVD video, Recorded video) Which component do you like for playback? DVD SCENE templates Default SCENE buttons DVD Viewing DVD Movie Viewing 1 DVD Live Viewing Music discs (CD, SA-CD or DVD-Audio) DVR DVR Viewing DVD Music Disc Listening 2 Disc Listening CD CD Listening CD Music Listening Radio programs TV programs TUNER (FM/AM) DTV/CBL Radio Listening
Selecting the SCENE templates ■ Preset SCENE template descriptions SCENE template CD Music Listening Features Select this SCENE template when you play back music source as the back ground music on your CD player. Input source Playback mode CD 5ch Stereo DVD Viewing Select this SCENE template when you play back general contents on your DVD player. DVD STRAIGHT DVD Movie Viewing (SCENE 1 as the default setting) Select this SCENE template when you play back movies on your DVD player.
Selecting the SCENE templates Creating your original SCENE templates 2 You can create your original SCENE templates for each SCENE button. You can refer to the preset 12 SCENE templates to create the original SCENE templates. ■ Customizing the preset SCENE templates • The active sound field programs or STRAIGHT mode • The night listening mode setting (see page 28) − SYSTEM: Keeps the current night listening mode. − CINEMA: Sets the night listening mode to the CINEMA mode.
PLAYBACK Playback Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS. 5 Rotate 8 VOLUME (or press D VOLUME +/–) to adjust the volume to the desired output level.
Playback ■ Selecting the component connected to the MULTI CH INPUT jacks as the input source Additional operations ■ Using your headphones Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel. VOLUME FM/AM l A/B/C/D/E PRESET/TUNING h MEMORY Use “MULTI CH SET” menu in “INPUT MENU” to set the parameter for MULTI CH INPUT (see page 47).
Playback ■ Adjusting the tonal quality 2 Press Sl / h to adjust the effect level while “NIGHT:CINEMA” or “NIGHT:MUSIC” is displayed in the front panel display. Choices: MIN, MID, MAX • Select “MIN” for minimum compression. • Select “MID” for standard compression. • Select “MAX” for maximum compression. y “NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored independently. Notes Use this feature to adjust the balance of bass and treble for the front left and right speaker channels.
Playback ■ Displaying the signal information ■ Using the sleep timer You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal. Use this feature to automatically set this unit to the standby mode after a certain amount of time. 1 Press MSLEEP repeatedly to set the amount of time. Each time you press M SLEEP, the front panel display changes as shown below. Press UMENU on the remote control. “BASIC SETUP” appears in the front panel display.
SOUND FIELD PROGRAMS Sound field programs This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. Press A PROGRAM l / h (or press GPROG l / h repeatedly). The name of the selected sound field program appears in the front panel display. Notes • Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 28).
Sound field programs ■ Selecting decoders for 2-channel sources (surround decode mode) y Signals input from 2-channel sources can also be played back on multi-channels. For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic: Press P SUR. DECODE repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference.
Sound field programs ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers. If you set “SUR. LR” to “NONE” (see page 43), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP or HiFi DSP program (see page 31). Note Virtual CINEMA DSP will not activate even when “SUR.
FM/AM TUNING FM/AM tuning There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations. Automatic tuning Manual tuning Automatic tuning is effective when station signals are strong and there is no interference.
FM/AM tuning Automatic preset tuning Manual preset tuning You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number. 1 2 3 Press D INPUT l / h repeatedly so that “TUNER” is displayed in the front panel display. Press 3 FM/AM to select “FM” as the reception band.
FM/AM tuning Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it was stored. y When performing this operation with the remote control, press C TUNER to select “TUNER” as the input source. 1 Press 4 A/B/C/D/E (or F A/B/C/D/E ) repeatedly to select the desired preset station group (A to E). The preset station group letter appears in the front panel display and changes each time you press the button.
RADIO DATA SYSTEM TUNING (EUROPE MODEL ONLY) Radio Data System tuning (Europe model only) Radio Data System is a data transmission system used by FM stations in many countries. This unit can receive various Radio Data System data such as PS (program service), PTY (program type), RT (radio text), CT (clock time), and EON (enhanced other networks) when receiving Radio Data System broadcasting stations.
Radio Data System tuning (Europe model only) Selecting the Radio Data System program type (PTY SEEK mode) Use this feature to select the desired radio program by program type from the all preset Radio Data System broadcasting stations. 3 Press E PRESET l / h on the remote control to select the desired program type. The name of the selected program type appears in the front panel display. y POP M Use the automatic preset tuning feature to preset Radio Data System broadcasting stations (see page 35).
Radio Data System tuning (Europe model only) 4 Press I PTY SEEK START on the remote control to start searching for all the available Radio Data System preset stations. The name of the selected program type flashes and the PTY HOLD indicator lights up in the front panel display while this unit is searching for stations. POP M Flashes PTY HOLD Lights up y To stop searching for stations, press I PTY SEEK START on the remote control again.
RECORDING Recording Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • The settings of TONE CONTROL (see page 29) and VOLUME settings, speaker levels (see page 29) and the sound field programs (see page 31) do not affect recorded material.
Set menu Set menu You can use the following parameters in set menu to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ Basic setup BASIC SETUP Use this feature to automatically adjust speaker and system parameters (see page 21). ■ Manual setup MANUAL SETUP Use this feature to manually adjust speaker and system parameters.
Set menu Option menu 3 OPTION MENU Use this menu to manually adjust the optional system parameters. Parameter Features Page A)DISPLAY SET Adjusts the brightness of the front panel display. 48 B)MEMORY GUARD Locks sound field program parameters and other set menu settings. 48 C)AUDIO SELECT Designates the default audio input jack select setting mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. 48 D)PARAM.
Set menu 1 SOUND MENU Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors. ■ Speaker settings A)SPEAKER SET Use this feature to manually adjust any speaker settings. FRONT B speaker setting FRONT B Use this feature to select the location of the front speakers connected to the FRONT B terminals. Choices: FRONT, ZONE B • Select “FRONT” to turn FRONT A and B on and off when the FRONT B speakers are set in the main zone.
Set menu LFE/Bass out BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR, FRNT, BOTH y If you are not satisfied with the bass sounds from your speakers, you can change these settings according to your preference. When a subwoofer is connected to this unit and you want to get natural bass sound Select “SWFR” (subwoofer).
Set menu ■ Speaker distance C)SP DISTANCE y Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.
Set menu ■ Audio settings G)AUDIO SET Use this feature to adjust the overall audio settings of this unit. Mute type MUTE TYP. Use this feature to adjust how much the mute function reduces the output volume (see page 28). Choices: FULL, –20dB • Select “FULL” to completely mute all the audio output. • Select “–20dB” to reduce the current volume by 20 dB. Audio delay A.DELAY Use this feature to delay the sound output and synchronize it with the video image.
Set menu ■ Input rename B)INPUT RENAME Use this feature to change the name of the input source that appears in the front panel display. The following is an example where “DVD” is renamed “My DVD”. DVR DVD 1 V-AUX DTV/CBL pDVD MD/CD-R TUNER CD My DVD Press one of the input selector buttons (C) or K MULTI CH IN to select the input source you want to change the name of.
Set menu 3 OPTION MENU Use this menu to adjust the optional system parameters. ■ Display settings A)DISPLAY SET Dimmer DIMMER Use this feature to adjust the brightness of the front panel display. Control range: –4 to 0 Control step: 1 • Press S l to make the front panel display dimmer. • Press S h to make the front panel display brighter. ■ Memory guard B)MEMORY GUARD Memory guard MEM. GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings.
Advanced setup Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ Factory presets PRESET Use this feature to reset all the parameters of this unit to the initial factory settings.
Troubleshooting Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem This unit fails to turn on or enters the standby mode soon after the power is turned on.
Troubleshooting Problem The sound suddenly goes off. Sound is heard from the speaker on one side only. Cause Remedy See page The protection circuitry has been activated because of a short circuit, etc. Check that the speaker wires are not touching each other and then turn this unit back on. — The sleep timer has turned off this unit. Turn on this unit, and play the source again. — The sound is muted. Press L MUTE or D VOLUME +/– on the remote control to resume audio output.
Troubleshooting Problem Cause Remedy See page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connected component is not set to output Dolby Digital or DTS digital signals. Make an appropriate setting following the operating instructions for your component. — Audio input jack select is set to “ANALOG”. Set Audio input jack select to “AUTO”. 29 A humming sound is heard. Incorrect cable connections.
Troubleshooting ■ Tuner Problem FM stereo reception is noisy. FM AM Cause The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Remedy See page Check the antenna connections. 18 Try using a high-quality directional FM antenna. — Use the manual tuning method. 34 There is distortion, and clear reception cannot be obtained even with a good FM antenna. There is multi-path interference.
Troubleshooting ■ Remote control Problem The remote control does not work nor function properly. Cause Remedy See page Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. 20 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. — The batteries are weak. Replace all batteries.
Glossary Glossary ■ Audio information Dolby Digital Dolby Digital is a digital surround sound system that gives you completely independent multi-channel audio. With 3 front channels (front L/R and center), and 2 surround stereo channels, Dolby Digital provides 5 full-range audio channels. With an additional channel especially for bass effects, called LFE (Low Frequency Effect), the system has a total of 5.1-channels (LFE is counted as 0.1 channel).
Glossary Sampling frequency and number of quantized bits When digitizing an analog audio signal, the number of times the signal is sampled per second is called the sampling frequency, while the degree of fineness when converting the sound level into a numeric value is called the number of quantized bits. The range of rates that can be played back is determined based on the sampling rate, while the dynamic range representing the sound level difference is determined by the number of quantized bits.
Specifications Specifications AUDIO SECTION VIDEO SECTION • Minimum RMS Output Power for Front, Center, Surround [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 Ω .................................................... 100 W [Other models] 1 kHz, 0.9% THD, 6 Ω .................................................... 100 W • Signal Level Composite ................................................................. 1 Vp-p/75 Ω Component ................... 1 Vp-p/75 Ω (Y), 0.
INDEX Index ■ Numerics 1 SOUND MENU ................................ 41 2 INPUT MENU ............................ 41, 46 2ch Stereo ............................................ 31 3 OPTION MENU ......................... 42, 48 5ch Stereo ............................................ 31 ■ A A)DISPLAY SET ................................ 48 A)INPUT ASSIGN .............................. 46 A)SPEAKER SET ............................... 43 A.DELAY ............................................
Index ■ M M.O.R. M, Radio Data System program type .................................... 38 Manual preset tuning ........................... 35 MANUAL SETUP ............................... 41 Manual setup ........................................ 41 Manual tuning ...................................... 34 MAX VOL. .......................................... 46 Maximum volume ................................ 46 MEM. GUARD .................................... 48 Memory guard ...................................
■ Front panel 1 2 3 4 5 6 7 8 VOLUME STANDBY /ON EDIT SEARCH MODE PRESET/TUNING CATEGORY A/B/C/D/E FM/AM l PRESET/TUNING/CH h MEMORY DISPLAY TUNING AUTO/MAN'L SCENE 1 l PHONES SPEAKERS A/B/OFF PROGRAM TONE CONTROL 3 4 l STRAIGHT INPUT NIGHT VIDEO AUX h AUDIO SELECT EFFECT SILENT CINEMA 9 i 2 h 0 A B C D E F VIDEO L AUDIO R PORTABLE
■ Remote control X A B C POWER POWER TV AV MULTI CH IN STANDBY POWER AUDIO SEL SLEEP MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX XM AMP TV INPUT TV MUTE TV VOL 1 2 L M N O D E F SCENE BAND LEVEL TITLE G H 3 4 SRCH MODE VOLUME MENU Q ENTER RETURN XM MEMORY P R DISPLAY REC I J K l PROG h 1 2 ENHANCER STRAIGHT 3 4 SUR.DECODE NIGHT 5 6 7 9 0 10 8 ENT.
List of remote control codes TV ACER ACME ACURA ADA ADC ADMIRAL ADYSON AGASHI AGAZI AGB AIKO AIWA AKAI AKIBA AKURA ALARON ALBA ALBIRAL ALLSTAR AMPLIVISION 0093 0207 0208 0255 0206 0058, 0205, 0206, 0210, 0211 0200, 0207 0200 0206 0204 0127, 0200, 0207, 0208 0028, 0139, 0229, 0237 0059, 0065, 0127, 0129, 0130, 0200, 0204, 0208, 0209, 0213, 0217, 0218, 0255 0209, 0218 0206, 0209, 0218 0200 0200, 0207, 0208, 0209, 0217, 0218 0212 0213 0207 0204, 0206, 0208, 0209, 0218 AMTRON 0062 ANAM 0208 ANAM NATIONAL 00
INNO HIT MAGNADYNE 0204, 0205, 0214, 0215, 0217 MAGNAFON 0200, 0204, 0207 MAGNAVOX 0060, 0061, 0063, 0102, 0103, 0150 MAGNUM 0206, 0208 MAJESTIC 0058 MANDOR 0206 MANESTH 0206, 0207, 0213, 0217 MARANTZ 0060, 0061, 0063, 0090, 0213, 0217 MARELLI 0205 MARK 0200, 0213, 0217 MATSUI 0204, 0207, 0208, 0210, 0213, 0217 MEDIATOR 0213, 0217 MEDION 0206, 0208 MEGATRON 0061 MELECTRONIC 0200, 0207, 0208, 0211, 0213, 0216, 0217 MEMOREX 0058, 0061, 0064, 0208 MEMPHIS 0208 METZ 0205 MGA 0060, 0061 MICROMAXX 0206, 0208 MIC
SEARS 0057, 0060, 0061, 0064 SEG 0200, 0206, 0207, 0214, 0215, 0217 SEI 0204 SEI-SINUDYNE 0204, 0205, 0211 SELECO 0210, 0211, 0215 SENCORA 0208 SENTRA 0218 SERINO 0200 SHARP 0009, 0010, 0011, 0060, 0061, 0066, 0070, 0087, 0111, 0143, 0145, 0167, 0168, 0169, 0198, 0204, 0224, 0247, 0248, 0249 SHOGUN 0060 SIAREM 0204, 0205, 0215 SICATEL 0212 SIEMENS 0255 SIERRA 0213 SIGNATURE 0058 SILVA 0200 SINGER 0205, 0214, 0215 SINUDYNE 0204, 0205, 0215, 0217 SKANTIC 0211 SOLAVOX 0211 SONOKO 0206, 0207, 0208, 0213, 0217
EMERSON KENWOOD 1000, 1001, 1007, 1011, 1043 KLH 1006 KODAK 1003, 1004 KORPEL 1050 LEYCO 1050 LG 1003, 1042, 1045, 1071 LIFETEC 1044, 1048 LLOYD'S 1005 LOEWE 1048 LOEWE OPTA 1045, 1046 LOGIK 1006, 1050 LUXOR 1047 LXI 1003 M ELECTRONIC 1042 MAGNASONIC 1047 MAGNAVOX 1004, 1018, 1033 MAGNIN 1003, 1014 MANESTH 1050 MARANTZ 1000, 1001, 1004, 1046, 1051 MARTA 1003 MATSUI 1044, 1045 MATSUSHITA 1004 MEDIATOR 1046 MEDION 1044, 1048 MEI 1004 MEMOREX 1001, 1002, 1003, 1004, 1005, 1008, 1013, 1014, 1042, 1045, 1047 M
01EN_HTR-6030_U_cv-4.
00_Sheet_HTR-6030_U.book Page 1 Thursday, December 28, 2006 10:19 AM U HTR-6030 The circled numbers and alphabets correspond to those in the Owner’s Manual.
00_Sheet_HTR-6030_U.book Page i Thursday, December 28, 2006 10:19 AM ■ Remote control X A B C POWER POWER TV AV MULTI CH IN STANDBY POWER AUDIO SEL SLEEP MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR TV CH V-AUX XM AMP TV INPUT TV MUTE TV VOL L M N O D E F SCENE 1 BAND LEVEL TITLE G H 2 3 4 SRCH MODE VOLUME MENU Q ENTER RETURN XM MEMORY P R DISPLAY REC I J K l PROG h 1 2 ENHANCER STRAIGHT 3 4 8 SUR.DECODE NIGHT 5 6 7 9 0 10 ENT.