AV RECEIVER/AV AMPLIFIER RX-V361/HTR-6030/DSP-AX361 SERVICE MANUAL IMPORTANT NOTICE This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
RX-V361/HTR-6030/DSP-AX361 ■ TO SERVICE PERSONNEL WALL OUTLET 1. Critical Components Information Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits. ● Meter impedance should be equivalent to 1500 ohms shunted by 0.15µF.
RX-V361/HTR-6030/DSP-AX361 ■ FRONT PANELS RX-V361 (U, C models) RX-V361 (R, T, K, A, B, G, E, L models) HTR-6030 (U, C models) RX-V361/HTR-6030/ DSP-AX361 3
RX-V361/HTR-6030/DSP-AX361 HTR-6030 (R, T, K, A, G, E models) RX-V361/HTR-6030/ DSP-AX361 DSP-AX361 (J model) 4
RX-V361/HTR-6030/DSP-AX361 ■ REAR PANELS RX-V361 (U, C models) RX-V361 (R model) RX-V361 (T model) RX-V361/HTR-6030/ DSP-AX361 5
RX-V361/HTR-6030/DSP-AX361 RX-V361 (K model) RX-V361 (A model) RX-V361/HTR-6030/ DSP-AX361 RX-V361 (B, G, E models) 6
RX-V361/HTR-6030/DSP-AX361 RX-V361 (L model) HTR-6030 (U, C models) HTR-6030 (R model) RX-V361/HTR-6030/ DSP-AX361 7
RX-V361/HTR-6030/DSP-AX361 HTR-6030 (T model) HTR-6030 (K model) RX-V361/HTR-6030/ DSP-AX361 HTR-6030 (A model) 8
RX-V361/HTR-6030/DSP-AX361 ■ REMOTE CONTROL PANELS HTR-6030 (G, E models) • RAV311 RX-361 (U, C models) HTR-6030 (U, C models) • RAV312 RX-V361 (R, T, K, A, L models) HTR-6030 (R, T, K, A models) DSP-AX361 (J model) DSP-AX361 (J model) • RAV28 RX-V361 (B, G, E models) HTR-6030 (G, E models) 9
RX-V361/HTR-6030/DSP-AX361 ■ SPECIFICATIONS / 参考仕様 10 Video Signal Type (Gray back) / ビデオ信号方式 (グレーバック) U, C, R, K, J models .................................................. NTSC T, A, B, G, E, L models ................................................. PAL Composite Video Signal Level / コンポジットビデオ信号 .................................................................. 1 Vp-p / 75 ohms Component Signal Level / コンポーネントビデオ信号 (U, C, R, T, K, A, B, G, E, L models) Y ..............................................
RX-V361/HTR-6030/DSP-AX361 • SCENE TEMPLATE SCENE name DVD Viewing DVD Movie Viewing DVD Live Viewing DVR Viewing Music Disc Listening Disc Listening CD Listening CD Music Listening Radio Listening XM Listening (U, C models) TV Viewing TV Sports Viewing Game Playing Contents DVD DVR DVD-Audio/SA-CD/CD CD TUNER/RADIO TV GAME Program Mode Sub-mode Movie DVD STRAIGHT – DVD MOVIE THEATER Movie Dramatic DVD MUSIC Pop/Rock DVR MOVIE THEATER Movie Dramatic Music Disc DVD STEREO 2ch Stereo DVD STEREO 5ch Stereo
MAIN MENU SIGNAL INFO 1 2 3 4 5 E) MULTI CH SET A) DISPLAY SET D) DECODER MODE C) VOLUME TRIM B) INPUT RENAME (U, C models) (J model) (J model) A) I/O ASSIGN (U, C, R, T, K, A, B, G, E, L models) G) AUDIO SET F) DYNAMIC RANGE E) LFE LEVEL D) CENTER GEQ C) SP DISTANCE B) SPEAKER LEVEL A) SPEAKER SET SPEAKER LEVEL SUB MENU B) MEMORY GUARD C) AUDIO SELECT D) PARAM. INI (U, C models) E) XM RADIO SET FORMAT (Signal format) SAMPLING CHANNEL B.
RX-V361/HTR-6030/DSP-AX361 ■ INTERNAL VIEW • Top view 1 2 3 4 5 6 7 1 2 3 4 5 6 Power Transformer OPERATION (3) P.C.B. OPERATION (5) P.C.B. (R, L models) MAIN (3) P.C.B. Tuner MAIN (2) P.C.B. (U, C, R, T, K, A, B, G, E, L models) D-VIDEO P.C.B. (J model) A 0 9 8 7 8 9 0 A B C D E DSP P.C.B. MAIN (4) P.C.B. MAIN (1) P.C.B. OPERATION (2) P.C.B. OPERATION (11) P.C.B. OPERATION (6) P.C.B. OPERATION (10) P.C.B. OPERATION (1) P.C.B. OPERATION (7) P.C.B.
RX-V361/HTR-6030/DSP-AX361 ■ DISASSEMBLY PROCEDURES / 分解手順 (番号順に部品を取り外してください。) AC電源コンセントから、電源コードを抜いてください。 (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. 1. Removal of Top Cover 1. トップカバーの外し方 a. Remove 4 screws (1), 4 screws (2) and 1 screw (3). (Fig. 1) b. Slide the top cover rearward to remove it. (Fig. 1) a. 1のネジ4本、2のネジ4本、3のネジ1本を外します。 (Fig. 1) b. トップカバーを後方へスライドさせ、取り外します。 (Fig. 1) 2. Removal of Front Panel Unit 2. フロントパネルユニットの外し方 a. Remove 6 screws (4).
RX-V361/HTR-6030/DSP-AX361 Cord stopper コードストッパー Rear panel リアパネル MAIN (2) P.C.B. (U, C, R, T, K, A, B, G, E, L models) D-VIDEO P.C.B. (J model) CB305 (J model) CB181 (U, C, R, T, K, A, B, G, E, L models) DSP P.C.B. CB502 DSP P.C.B. CB501 CB512 CB516 9 CB193 CB101 CB104 MAIN (1) P.C.B. Fig. 2 U, C, R, T, K, A, B, G, E, L models 5 6 7 8 (R, L models) J model 5 6 7 15 RX-V361/HTR-6030/ DSP-AX361 Fig.
RX-V361/HTR-6030/DSP-AX361 When checking the P.C.B. P.C.B.をチェックする場合 a. b. c. d. e. a. b. c. d. e. Remove the Top cover. (Fig. 1) Remove 3 screws (7). (Fig. 3) Remove 5 screws (0) and 4 screws (A). (Fig. 4) Place the P.C.B. upright. (Fig. 5) The rear panel and P.C.B. removed from the chassis does not work because its grounding is loose. Be sure to connect the ground of heat sink, rear panel and MAIN (1) P.C.B. (G103, G104, G105 and ST101) to the chassis with a ground lead or the like. (Fig.
RX-V361/HTR-6030/DSP-AX361 ■ UPDATING FIRMWARE / ファームウェアの書き込み 下記部品をサービス部品に交換した場合、最新のファーム ウェアの書き込みを行ってください。 After replacing the following parts with the replacement part, be sure to write the latest firmware. ・ DSP P.C.B. ・ IC201 (DSP P.C.B.) • DSP P.C.B. • IC201 (DSP P.C.B.
RX-V361/HTR-6030/DSP-AX361 2. 本機の “STANDBY/ON” キーと、 “SPEAKERS A/B/ OFF” キーを押しながら、本機の電源コードをACコ ンセントに接続します。(Fig. 2) FIRMWARE UPDATEモードが起動し、“SPDIF Upgrade”が表示されます。(Fig. 2) 2. While pressing the “STANDBY/ON” key and “SPEAKERS A/B/OFF” key of the main unit simultaneously, connect the power cable of the main unit to the AC outlet. (Fig. 2) The FIRMWARE UPDATE mode will then be activated and “SPDIF Upgrade” is displayed. (Fig. 2) "STANDBY/ON" key "SPEAKERS A/B/OFF" key FIRMWARE UPDATE mode SPDIF Upgrade Fig.
RX-V361/HTR-6030/DSP-AX361 * When the version of the firmware to be written is the same as the one existing in the main unit, “Same Version”, “Please...” and “Turn off!!” are displayed repeatedly. (Upgrading is not necessary.) ※ 本機に既存のファームウェアと、書き込もうと しているファームウェアのバージョンが同じ場 合、 “Same Version” 、 “Please...
RX-V361/HTR-6030/DSP-AX361 ■ SELF DIAGNOSIS FUNCTION (DIAG)/自己診断機能(ダイアグ) This unit has self diagnosis functions that are intended for inspection, measurement and location of faulty point. There are 18 DIAG menu items, each of which has submenu items. Listed in the table below are menu items and sub-menu items. Note that not all menu items listed will apply to the models covered in this service manual. RX-V361/HTR-6030/ DSP-AX361 No.
RX-V361/HTR-6030/DSP-AX361 No. 14 DIAG menu IF STATUS (Not applied to these models.
RX-V361/HTR-6030/DSP-AX361 ● ダイアグの起動 • Starting DIAG Press the “STANDBY/ON” key while simultaneously pressing those two keys of the main unit as indicated in the figure below. 本体の下図に示すキーを同時に押しながら “STANDBY/ ON” キーを押すと、ダイアグが起動します。 Keys of main unit / 本機キー Turn on the power while pressing these keys.
RX-V361/HTR-6030/DSP-AX361 プロテクション履歴が無い場合: When there is no history of protection function: Opening message / オープニング表示 When there is no protection history プロテクション履歴が無い場合 DIAG menu display / ダイアグメニュー表示 After a few seconds / 数秒後 NO PROTECTION 1.
RX-V361/HTR-6030/DSP-AX361 電源部の電圧異常によるプロテクション履歴がある場合 When there is a history of protection function due to abnormal voltage in the power supply section PRV PRT:xxx AD value when the protection function is working プロテクション動作時のA/D値 Cause: The voltage in the power supply section is abnormal. Supplementary information: The protection function worked due to a defect or overload in the power supply.
RX-V361/HTR-6030/DSP-AX361 • Operation procedure of DIAG menu and Sub-menu ● ダイアグメニューとサブメニューの操作 ダイアグにはNo. 1∼18のメニューがあり、そのそれ ぞれにサブメニューがあります。 There are 18 menu items, each of having sub-menu items. ダイアグメニューの選択: “PROGRAM >” (順送り)、 “PROGRAM <” (逆送り) キーで選択します。 DIAG menu selection: Select the menu using “>” (forward) and “<” (reverse) keys of PROGRAM. サブメニューの選択: “SCENE 2” (順送り)、“SCENE 1” (逆送り)キーで選 択します。 Sub-menu selection: Select the sub-menu using “SCENE 2” (forward) and “SCENE 1” (Reverse) keys.
RX-V361/HTR-6030/DSP-AX361 ● ダイアグメニュー詳細 • Details of DIAG menu 1. BYPASS 1. BYPASS Using the sub-menu, it is possible to select ANALOG BYPASS output or DSP BYPASS output. サブメニューによりANALOG BYPASS/DSP BYPASS が選択可能です。 ANALOG BYPASS The analog input sound signal is output to FRONT L/R with EFFECT OFF. ANALOG BYPASS アナログ入力の音声信号をEFFECT OFFでFRONT L/ Rへ出力します。 1.ANLOG BYPASS INPUT: DVD ANALOG SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz Input level Volume Both ch, -20 dBm +6.0 dB FRONT +11.
RX-V361/HTR-6030/DSP-AX361 3. SPEAKER SET 3. SPEAKER SET The analog switch settings for each sub-menu are as shown in the table below. 各サブメニューにおけるアナログスイッチの設定は以 下の通りです。 FRONT CENTER LFE/B TONE TONE : SML 0dB : NONE : FRNT : MAX : MIN SMALL LARGE LARGE LARGE LARGE LARGE NONE SMALL LARGE LARGE LARGE: This mode is used for a speaker with high bass reproduction performance (a large unit). Full bandwidth signals are output.
RX-V361/HTR-6030/DSP-AX361 4. 6CH INPUT 4. 6CH INPUT The input source [MULTI CHANNEL INPUT] is selected. It is possible to select the 6-ohm/8-ohm by using the sub-menu. 入力ソース[MULTI CHANNEL INPUT]が選択されま す。 サブメニューにより、6オーム/8オームが選択可能で す。 6 ch INPUT 6-ohm 6 ch INPUT 6-ohm 4.6ch INPUT 6 Ω INPUT: MULTI CH INPUT SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz Sub-menu Input level Volume 6 ch INPUT 6-ohm Both ch, -20 dBm +6.0 dB SPEAKER OUT CENTER +11.5 dBm FRONT +11.5 dBm SURROUND +11.
RX-V361/HTR-6030/DSP-AX361 6. FL CHECK 6. FL CHECK Use this program to check the FL display section. For audio signal processing, use STRAIGHT.
RX-V361/HTR-6030/ DSP-AX361 RX-V361/HTR-6030/DSP-AX361 30 7. TEST TONE 7. TEST TONE The noise generator with a built-in microprocessor outputs the noise through the channels specified by the submenu. The noise frequency for LFE (SUBWOOFER) is 35 to 80 Hz. Other than that, the noise frequency is 500 to 2 kHz. マイコンに内蔵されているノイズ発生回路によって、 サブメニューで指定したチャンネルへノイズを出力し ます。 LFE(SUBWOOFER) 用のノイズ周波数は35∼80 Hz、 それ以外はノイズ周波数500∼2 kHzとなります。 7.TEST ALL TEST ALL Noise is output from all channels. 全チャンネルからノイズを出力。 7.
RX-V361/HTR-6030/DSP-AX361 注意: CAUTION: Before setting to the PRESET RESERVED, write down the existing preset memory content of the tuner in a table as shown below. (This is because setting to the PRESET RESERVED will cause the user memory content of the tuner to be erased.) Preset Group A B C D E P1 P2 P3 P4 P5 PRESET RESERVEDを選んで初期化を する前に、チューナーのユーザーメモリー 内容を下表に書き写してください。 (初期化をすると、チューナーのユーザー メモリーの内容は消えてしまいます。) P6 P7 P8 9. A/D DATA CHECK 9.
RX-V361/HTR-6030/DSP-AX361 U, C models (Reference voltage: 3.3 V=255) PLDET LIM H: 255 / L: 102 (LIM: Limiter control) During normal operation 255 H Value for starting limiter operation 77 L Value for canceling limiter operation 100 H Value for starting limiter operation 100 L Value for canceling limiter operation 131 H リミッター動作開始値 100 L リミッター動作解除値 131 H R, T, K, A, B, G, E, L models (Reference voltage: 3.
RX-V361/HTR-6030/DSP-AX361 10. XM STATUS(U、C models) 10. XM STATUS (U, C models) The output check of XM radio antenna module is executed. 10.1k - 1dB/44 1 kHz, -1 dB / 44.1 kHz The test tone (1 kHz, -1 dB / 44.1 kHz) is output. 10.1k -61dB/44 1 kHz, -61 dB / 44.1 kHz The test tone (1 kHz, -61 dB / 44.1 kHz) is output. 10.MUTE Mute / 44.1 kHz No signal is output. /44 10.XM TONE /44 XM tone / 44.1 kHz The XM tone / 44.1 kHz is output. 10.ISO TONE/44 ISO tone / 44.1 kHz The ISO tone /44.
RX-V361/HTR-6030/DSP-AX361 13. DAB CHECK 13. DAB CHECK Not applied to these models. このモデルには適用されません。 13.DAB 1 RX-V361/HTR-6030/ DSP-AX361 13.DAB 3 14. IF STATUS (Input function status) 14. IF STATUS Not applied to these models. このモデルには適用されません。 14.IF 34 ••••••• ••••••• 1 14.IF 17 15. PROTECTION SETTING 15. PROTECTION SETTING The A/D setting value of each protection is displayed. (Reference voltage: 3.3 V=255) 各プロテクションのA/D設定値が表示されます。 (基準 電圧:3.3 V=255) 15.
RX-V361/HTR-6030/DSP-AX361 16. PROTECTION HISTORY 16. PROTECTION HISTORY Four protection histories are displayed. 過去のプロテクション履歴が4つまで表示されます。 Example / 例 16.PRI: 90 History 1 / 履歴 1 Example / 例 16.PRD: 34 History 2 / 履歴 2 Example / 例 16.THM: 60 History 3 / 履歴 3 Example / 例 16.
RX-V361/HTR-6030/DSP-AX361 17. SOFT SWITCH 17. SOFT SWITCH 注) 開発用メニューのため、機能設定の変更は行わな いでください。 機能設定を変更した場合、正常に動作しないこと があります。 RX-V361/HTR-6030/ DSP-AX361 Note) As this is a development menu, do not change the function setting. Changing the function setting may hinder the proper operation. 36 This menu is used to switch the function settings on P.C.B. through the software to activate the main unit. The protection function follows the P.C.B. settings. P.C.B.上の機能設定をソフト的に切り替えて、本機を 動作させる機能です。 プロテクション機能は、P.
RX-V361/HTR-6030/DSP-AX361 18. ROM VER/SUM 18. ROM VER/SUM The version and checksum are displayed. The signal is processed using EFFECT OFF. The checksum is obtained by adding the data at every 8 bits for each program area and expressing the result as a 4-figure hexadecimal data. プログラムのバージョン、チェックサムを表示しま す。 信号はエフェクトオフです。 チェックサムは、プログラムエリア別にデータを8 ビットごとに加算していき、4桁の16進データで現し たものです。 18. VER. H045 Version Firmware version of microprocessor (IC101 DSP P.C.B.) is displayed. マイコン(IC101 DSP P.C.B.
RX-V361/HTR-6030/DSP-AX361 RX-V361/HTR-6030/ DSP-AX361 MEMO MEMO 38
RX-V361/HTR-6030/DSP-AX361 ■ DISPLAY DATA ● ANODE CONNECTION ● V2001 : 17-BT-29GNK (OPERATION P.C.B.) } 1 17G PATTERN AREA ● PIN CONNECTION Pin No. 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 Connection F2 NX NP NP P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Pin No.
RX-V361/HTR-6030/DSP-AX361 ■ IC DATA IC101: ADSP-BF531 CPU (DSP P.C.B.
RX-V361/HTR-6030/DSP-AX361 Port Name TSCLK1 DR1SEC DR1PRI RFS1 RSCLK1 VDDINT DT0SEC DT0PRI TFS0 DGND VDDEXT TSCLK0 DR0SEC DR0PRI RFS0 RSCLK0 – – LIMITER VDDINT DTXM DRXM – – – – – DGND DGND DGND DGND DGND VDDEXT – BMODE1 BMODE0 DGND D16 D15 D14 D13 D12 D11 D09 D08 DGND VDDEXT D07 D06 D05 VDDINT D04 D03 D02 D01 D00 DGND VDDEXT – – Function Name TSCLK1 DR1SEC DR1PRI RFS1 RSCLK1 VDDINT DT0SEC DT0PRI TFS0 GND VDDEXT TSCLK0 DR0SEC DR0PRI RFS0 RSCLK0 TMR2 TMR1 TMR0 VDDINT TX RX /EMU /TRST TMS TDI TDO GND GND GN
RX-V361/HTR-6030/DSP-AX361 RX-V361/HTR-6030/ DSP-AX361 Pin No.
RX-V361/HTR-6030/DSP-AX361 • Microprocessor extended port IC204-IC206: SN74LV573APWR (DSP P.C.B.) Octal 3-state D-latches with 3-state outputs OE LE 1 11 C1 1D 2 1D C8 8D 9 19 8D 12 1Q 8Q OE 1D 2D 3D 4D 5D 6D 7D 8D GND 1 20 VCC 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q LE IC204 Pin No.
RX-V361/HTR-6030/DSP-AX361 IC206 RX-V361/HTR-6030/ DSP-AX361 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 44 Port Name /OE 1D 2D 3D 4D 5D 6D 7D 8D GND LE 8Q 7Q 6Q 5Q 4Q 3Q 2Q 1Q VCC Function Name /EXPE D00 D01 D02 D03 D04 D05 D06 D07 DGND LEEX2 /VR1 SPISEL5 /8ohmSW HPRY MRYA MRYB CSRY /SWMT EX3.
RX-V361/HTR-6030/DSP-AX361 • Microprocessor ADC select port IC401: ADC084S021CIMM (DSP P.C.B.) 4-channel, 200 kSPS, 8-bit A/D converter IN1 8-Bit SUCCESSIVE APPROXIMATION ADC IN2 IN3 MUX T/H VA GND 1 10 SCLK VA 2 9 DOUT 3 ADC084S021 8 DIN IN4 4 7 IN1 IN3 5 6 IN2 GND GND IN4 CS SCLK CS DIN CONTROL LOGIC DOUT Pin No.
RX-V361/HTR-6030/DSP-AX361 IC402 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Port Name Y4 Y6 COM Y7 Y5 INH GND GND COM B A Y3 Y0 Y1 Y2 Vcc Function Name – – COM LINKACTIVE XM_MUTE DGND DGND DGND ADSEL2 ADSEL1 ADSEL0 – – /ST /TUNED +3.3S Port Name Y4 Y6 COM Y7 Y5 INH GND GND COM B A Y3 Y0 Y1 Y2 Vcc Function Name DEST /PDET COM /HP PRIIN DGND DGND DGND ADSEL2 ADSEL1 ADSEL0 PLDET PRDIN PRVIN THMIN +3.
RX-V361/HTR-6030/DSP-AX361 IC301: AK4588VQ (DSP P.C.B.
RX-V361/HTR-6030/DSP-AX361 Pin No. 1 Function Name INT1 I/O O Interrupt 1 pin 2 BOUT O Block-start output pin for receiver input “H” during first 40 flames 3 4 5 6 7 TVDD DVDD DVSS XTO XTI – – – O I 8 TEST3 I 9 10 11 12 13 14 15 16 17 18 19 20 MCKO2 MCKO1 COUT UOUT VOUT SDTO2 BICK2 LRCK2 SDTO1 BICK1 LRCK1 CDTO CCLK SCL CDTI SDA Output buffer power supply pin, 2.7 V to 5.5 V Digital power supply pin, 4.5 V to 5.
RX-V361/HTR-6030/DSP-AX361 Pin No.
RX-V361/HTR-6030/DSP-AX361 CLOCK DATA DGND SUBR SUBL SBLCIN SBRCIN FRIN2 FLIN2 SRIN2 SLIN2 SWIN2 CIN2 SBRIN2 SBLIN2 N.C. TRER BASSR2 BASSR1 N.C. IC161: R2A15215FP (MAIN P.C.B.) 8-channel electronic volume with 11 input selector and tone control 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 A VCC MUTE 51 30 A VCC MCU I/F A VEE 52 29 N.C. A VEE N.C.
RX-V361/HTR-6030/DSP-AX361 Function Name N.C. SBLC SBLOUT AGND SBROUT SBRC AGND SLC SLOUT AGND SROUT SRC N.C. SWC SWOUT AGND COUT CC AGND FLC FLOUT AGND FROUT FRC N.C. BASSL1 BASSL2 TREL N.C. AVCC N.C. BASSR1 BASSR2 TRER N.C. SBLIN2 SBRIN2 CIN2 SWIN2 SLIN2 SRIN2 FLIN2 FRIN2 SBRCIN SBLCIN SUBL SUBR DGND DATA CLOCK MUTE AVEE N.C.
RX-V361/HTR-6030/DSP-AX361 RX-V361/HTR-6030/ DSP-AX361 Pin No. 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 52 Function Name AGND N.C. INR1 INL1 INR2 INL2 INR3 INL3 INR4 INL4 INR5 INL5 INR6 INL6 INR7 INL7 INR8 INL8 N.C. INRA/RECR1 INLA/RECL1 N.C. INR9 INL9 N.C. INRB/RECR2 INLB/RECL2 INR10/RECR4 INL10/RECL4 INR11/RECR5 INL11/RECL5 N.C. N.C. N.C. RECR3 RECL3 N.C.
RX-V361/HTR-6030/DSP-AX361 IC201: M66003-0131FP-R (OPERATION P.C.B.
RX-V361/HTR-6030/DSP-AX361 RX-V361/HTR-6030/ DSP-AX361 Pin No.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 ■ BLOCK DIAGRAMS Video, Audio and Power Supply Sections • See page 71-75 → SCHEMATIC DIAGRAM DSP MAIN OPERATION • See page 76, 77 → SCHEMATIC DIAGRAM U, C, R, T, K, A, B, G, E, L models • See page 78, 79 → SCHEMATIC DIAGRAM Power supply for AK4588 (IC301) +5AAK Power supply for Power supply for BN74HC245 (IC404) component video circuit SN74LVU04 (IC305) GP1FA553RZDF (U301, 302) RDS decoder circuit +5D +5 2 DVD Y/PB/PR 5, 12, 13 R28 10K
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 Control Section 2 OPERATION • See page 76, 77 → SCHEMATIC DIAGRAM /RESET from OPERATION CONTROL LIST /RESET • See page 71-75 → SCHEMATIC DIAGRAM Input select VIA, VIB, /VR1 SSEL1-3 Control bus SPISEL3-5 /CCBE /IC_AK A/D select ADSEL0-2 IC505 IC505 IC202 IC201 12 IC204-206 SDRAM FlashROM W9864G6EH-7 S29AL008D70TFI0 3 ExPort1/2 1 15 /DRESET ARDY D0 - D15 D0 - D15 LE IC203 D0 - D15 /AWE, /AOE, /AMS0 A1 - A19 A1 - A19 D
RX-V361/HTR-6030/DSP-AX361 ■ PIN CONNECTION DIAGRAMS • ICs • Diodes ADSP-BF531 CPU ADC084S021 CIMM AK4588VQ 132 89 133 60 88 41 61 176 Cathode KBP103G 1.0A 200V 20 44 F2621E-01-TR – 25 4 8 + 24 37 48 1 LC72725KM INPUT OUT OUTPUT 48 2SA1037K 2SC2412K 2SC3326 2SD1938F 2SA1015 2N5401C 2N5551C 33 32 8 64 1 NJM2388F05 NJM2388F33 17 1 NJM2581M E 16 E KRC102M-AT C B BC B E KRA102S-RTK/P KRA104S-RTK KRC102S-RTK KRC104S-RTK 51 81 E 1. 2. 3. 4.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 ■ PRINTED CIRCUIT BOARDS DSP P.C.B. (Side A) R2A_CLK /SWMT R2A_DATA MRYB CSRY HPRY MRYA /8ohmSW /HP TUNED NC SPIMI /ST SPIMO SPICLK CEP THM XMPWR PRV PRY /PDET /RESET +5I iGND +5 MG MG +3.3 +5XM (CB232) RDS_RDY OPERATION (2) 2 RDS_RST RDS_DATA MAIN (1) (CB161) RDS_CLK 1 U, C models • Semiconductor Location Ref no. Location Ref no.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 DSP P.C.B. (Side B) 2 U, C models 3 4 B, G, E models U, C models • Semiconductor Location Ref no.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 OPERATION (1) P.C.B. (Side A) 2 MIC E +12 -12 MAIN (4) (CB191) DSP (CB408) (CB235) CB203 3 OPERATION (2) CB202 /MICDET SSEL3 SSEL2 SSEL1 VRB VRA REM1 PSW /BLK CKFD DTFD /CEFD ADKEY1 ADKEY0 +3.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 OPERATION (1) P.C.B. (Side B) 2 20 IC 48 49 1 33 32 17 16 3 64 1 4 5 • Semiconductor Location 6 Ref no. Location Ref no.
A B C D E F G H I RX-V361/HTR-6030/DSP-AX361 1 OPERATION (2) P.C.B. (Side A) 2 U, C models IC233 IC238 IC236 IC237 IC232 IC235 4 1 4 1 3 OPERATION (1) AC5 VP AC5 DSP (CB516) C B2 35 (CB203) 4 CB232 CB233 MG ACDET PRY S9 E AC2 NC AC2 AC3 NC AC3 AC4 NC AC4 AC5 AC5 +12 AGND -12 +3.3 +5 PRV VP CB231 CB234 POWER TRANSFORMER 5 THM XMPWR PRV PRY /PDET /RESET +5I IG +5 MG MG +3.3 +5XM OPERATION (3) MAIN (1) (CB251) (CB103) • Semiconductor Location Ref no.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 OPERATION (2) P.C.B. (Side B) 2 U, C models 3 4 5 6 • Semiconductor Location Ref no.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 OPERATION (3) P.C.B. CB254 OPERATION (3) P.C.B. (Side A) (Side B) CB252 • Semiconductor Location 2 Ref no.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 OPERATION (7) P.C.B. OPERATION (10) P.C.B. (Side A) (Side A) 2 OPERATION (1) (CB204) (CB192) 74 B2 C AXR E AXL VE AUX-V MAIN (4) FG V_CTRL PSW W2351 JK266 3 STANDBY /ON PORTABLE R L • Semiconductor Location VIDEO AUDIO Ref no. Location VIDEO AUX 4 OPERATION (7) P.C.B. (Side B) OPERATION (11) P.C.B.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 (Side A) MULTI CH INPUT AUDIO FRONT SURROUND CENTER / SUBWOOFER MAIN (2) (CB181) U, C, R, T, K, A, B, G, E, L models L/R DVD L/R DTV/CBL L/R L/R DVR CD IN OUT L/R L/R MD/CD-R SUB IN OUT WOOFER (PLAY) (REC) OUT L/R L/R L/R MAIN (3) (W101B) B, G, E models VIA VIB VR1 +5 +12 -12 J model SPB_R SPB_RG SPB_LG SPB_L D-VIDEO (CB305) 2 POWER TRANSFORMER MAIN (1) P.C.B.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 MAIN (1) P.C.B. (Side B) B, G, E models 2 8 5 IC164 1 4 8 IC163 5 1 4 81 80 3 1 100 1 1 16 IC 8 IC162 5 51 50 4 8 30 31 9 8 1 IC168 16 5 IC169 1 4 4 • Semiconductor Location Ref no. Location Ref no.
A B C D E F G H I RX-V361/HTR-6030/DSP-AX361 1 MAIN (2) P.C.B. (Side A) U, C, R, T, K, A, B, G, E, L models 2 VIDEO COMPONENT VIDEO DVD DTV/CBL DVR PR / PB / Y PR / PB / Y PR / PB / Y DVD MONITOR OUT PR / PB / Y DTV/CBL DVR IN MONITOR OUT OUT 3 IC182 1 4 9 W181 V-AUX VE VE VIA VIB VR1 +5 +12 -12 CB181 MAIN (1) MAIN (4) (W161) (CB193) • Semiconductor Location Ref no. Location MAIN (2) P.C.B.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 MAIN (3) P.C.B. MAIN (4) P.C.B.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 D-VIDEO P.C.B. (Side A) D-VIDEO P.C.B. J model (Side B) J model 2 8 1 IC305 CB302 DVD CB303 3 9 DTV/CBL 16 8 1 IC304 9 16 CB304 CB301 D4 VIDEO 4 DVR MONITOR OUT 7 MAIN (4) (CB193) 8 IC303 1 14 DVD • Semiconductor Location 6 IC306 DTV/CBL IN IC308 MAIN (1) (W161) VE VE AXV W3001 5 VIDEO DVR 1 IC307 VIA VIB /VR1 +5 +12 -12 7 70 OUT MONITOR OUT 9 Ref no. Location Ref no.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 SCHEMATIC DIAGRAMS DSP 1/5 1 to DSP 2/5 1.4 3.4 1.4 2 0 2.0 3.4 0 1.0 1.1 1.7 1.9 1.8 1.8 1.8 1.4 1.8 3.4 0 2.0 2.1 3.3 1.4 0.2 3.4 3.4 3.4 3.4 0 1.4 3.4 3.4 3.4 3.3 3.3 0.1 3.3 0.8 3.1 2.6 3.3 1.8 1.4 3.4 0 2.3 3.4 0 0 3 0 1.4 to DSP 5/5 EEPROM 3.4 3.4 0.3 3.4 0 IC102 3.4 3.4 0 0 0 0 0 0 2.0 0 2.0 0 3.4 2.2 3.4 0 0.2 0 0.2 0 0.2 1.7 4 to DSP 2/5 0.1 3 1.7 0.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 DSP 2/5 1 to DSP 1/5 3.3 0 to DSP 5/5 3 1.6 3.3 1.6 3.3 1.6 3.3 1.6 3.3 1.6 3.3 1.6 3.3 1.6 3.3 1.6 0 0.3 0 0.3 0 0.3 0 0.3 0 0.3 0 0.3 0 IC202: W9864G6EH 1 M x 4 banks x 16-bit SDRAM EXTENDED PORT CLK to DSP 1/5 CLOCK BUFFER CKE CS RAS CAS 0.3 WE COLUMN DECODER 0.2 0.1 0.1 A0 1.0 A9 A11 BS0 BS1 ADDRESS BUFFER 4 A10 MODE REGISTER COLUMN DECODER ROW DECODER IC203 SDRAM ROW DECODER 3.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 DSP 3/5 1 2 3 DIGITAL IN 2.4 IC305 2.8 4.9 0.6 IC305 0 0 2.5 2.9 4.9 0 0 4.9 0 0 IC305 0 IC305 2.2 IC305 1.1 IC305 3.3 0 DVD (U, C, R, T, K, A, B, G, E, L models) CD (J model) 0 2.5 0 2.5 DIGITAL IN 3.3 4 4.9 0.6 4.9 0 CODEC with DIR 2.5 2.5 2 0 0 ANALOG L 4.9 4.9 2.5 2.5 4.9 PVSS PVDD 1.1 2.5 RX0 2.5 RX1 RX2 RX3 RX4 RX5 2.2 2.2 1.9 5 FL 2.5 2.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 DSP 4/5 1 to DSP 2/5 A/D SELECTOR 2 3 to DSP 5/5 3.4 0.1 0 3.4 0 3.4 0 0.2 0.2 0.2 0.2 3.4 0.2 IC402 3.3 3.3 3.3 to DSP 3/5 3.3 0.1 0.2 0 4 1.5 0 A/D SELECTOR 5 * Destination for A/D port 0 4ch ADC 1.5 to DSP 5/5 0 6 0.1 0 3.4 0 3.4 0 3.4 3.3 0.1 3.4 0.4 1.5 3.3 0 3.4 0.2 3.3 3.4 3.3 3.4 1.1 3.3 IC403 1.5 3.3 IC401 R406 [ohm] R407 [ohm] DEST (1 pin) [V] A/D value (3.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 DSP 5/5 1 CB512 to DSP 1/5 2 to DSP 2/5 to DSP 1/5 Page 79 D10 to DSP 2/5 to MAIN (5)_CB161 to DSP 3/5 to DSP 1/5, 2/5, 4/5 to DSP 1/5 3.3 0.1 3 3.3 CB501 Page 78 3.3 A5 to MAIN (1)_CB101 to DSP 1/5-4/5 4 FL to DSP 3/5 CB502 to DSP 3/5 SL SW C Page 79 to DSP 1/5-4/5 ANALOG L F4 to MAIN (5)_CB164 B, G, E models to DSP 3/5 5 to DSP 4/5 to DSP 4/5 4.9 0 0 IC501 3.3 IC501 0 4.9 3.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 -18.4 -15.2 -13.5 -23.3 -13.5 -24.9 -24.9 -26.0 -26.6 -16.7 -13.5 -23.3 -23.2 -24.9 -18.4 -13.5 -21.7 -18.4 -21.7 -20.0 -13.5 -21.6 -21.6 -24.9 -21.6 -13.4 -24.9 -24.9 -23.3 -20.0 -21.6 -15.1 -16.8 -15.1 -21.6 -24.9 -26.6 -24.9 -24.9 -24.9 OPERATION 1/2 1 -19.3 -19.3 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -25.0 -19.3 -19.3 2 3.2 -16.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 OPERATION 2/2 1 8.7 11.8 13.3 4.3 11.8 11.8 11.8 4.3 4.3 CB258 AC 11.0 13.3 12.7 11.7 0.8 2 4.3 4.3 CB251 R, L models 13.2 12.0 OPERATION (5) 4.3 0.8 CB256 0.8 13.5 AC IN 0 To POWER TRANSFORMER 12.7 4.3 1.7 0 1.7 CB257 0 3 CB252 CB254 To POWER TRANSFORMER W2251 OPERATION (3) 4 OPERATION (2) 3.3 3.3 3.3 0 0 3.3 0 3.3 0 8.7 5 1.0 0 0 3.3 IC238 0 0 0 0 0 11.8 11.8 IC232 CB231 12.6 12.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 MAIN 1/2 1 IC101: STK433-330-E 3-channel AF power amplifier, stand-by circuit built-in POWER AMPLIFIER IC102 -12.0 0 2 0 0 1.7 0 0 0 3 47.7 FRONT L 0 47.3 SURROUND L 0 0 0 0 0 47.8 -47.6 47.8 -46.4 8 SPEAKERS FRONT A L/R 0 Pre Driver CH1 Pre Driver CH3 Pre Driver CH2 47.5 MONO IC 0 0 11 + + + 12 – – – 0 -12.0 0 W101A 0 Bias Circuit 1 0 2 3 SUB 9 3.3 3.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 MAIN 2/2 1 W181 IC182 RDS Page 80 C2 to D-VIDEO_W3001 (J model) IC181 MAIN (2) 3 Page 80 G10 to D-VIDEO_CB305 (J model) 11.
A B C D E F G H I J L K M N RX-V361/HTR-6030/DSP-AX361 D-VIDEO (J model) 1 Page 79 J4 W3001 to MAIN (4)_CB193 SELECTOR and VIDEO AMPLIFIER 2 6.1 5.0 5.0 0 4.0 4.0 4.0 11.8 0.9 IC307 3 VIDEO 11.8 6.2 6.2 6.2 5.5 7.2 4 6.8 0 0.1 OUTPUT AMPLIFIER 5 0 IC304 0 0 0 0 0 0 5.0 0 0 -4.9 0 0 0 0 0 5.0 0 -4.9 5.0 -4.9 5.0 -4.9 0 5.0 5.0 0 IC303 CB301 0 5.0 0 -4.9 CB302 6 0 0.1 5.0 0.1 0.1 0.
RX-V361/HTR-6030/DSP-AX361 ■ REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING ● Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed. ● The chip resistor is not supplied as a replacement part. * When a chip resistor is necessary, use the following part.
RX-V361/HTR-6030/DSP-AX361 P.C.B. DSP RX-V361/HTR-6030/ DSP-AX361 * * * * * * * * Ref No. Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. DSP * * * * * * Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. DSP and P.C.B. OPERATION * * * Ref No. Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. OPERATION * * * * s * * * * * s * s s s s s s s s s s s s Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. OPERATION and P.C.B. MAIN s s s s * s s s s * s * s * * * * * * s s s s Ref No. Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. MAIN Ref No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. MAIN * * * * * * * RX-V361/HTR-6030/ DSP-AX361 * Ref No. Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. MAIN * s * s * s * * * * * * * * * * * * * s s s s s s s s s s Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. MAIN and P.C.B. D-VIDEO s s s s s s s * s * s * s s * s * s * * * * Ref No. Part No.
RX-V361/HTR-6030/DSP-AX361 P.C.B. D-VIDEO Ref No. Part No. C3051 C3052 C3053-3054 C3055-3056 C3057 D3001-3009 IC303 IC304-306 IC307 IC308 PJ301 PJ302 PJ303 Q301-302 Q303 R3044 R3049 UR838100 UR837100 US062100 UR829100 US063100 VT332900 X2904A00 XS790A00 XH436A00 X7973A00 V7190000 V7189800 V7190000 iC1815I0 iC174020 HV755270 HV753220 Description C.EL C.EL C.CE.CHP C.EL C.CE.CHP DIODE IC IC IC IC JACK.PIN JACK.PIN JACK.PIN TR TR R.CAR.FP R.CAR.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 • OVERALL ASS’Y 200 T, K, A, B, G, E models 157 156 157 16 157 17 2 171 200-1 160 160 201 160 160 172 201-1 23 160 3 5 (3) 202 U, C, R, T, L, J models 160 101 12 202 K, A, B, G, E models 103 171 4 168 168 170 203 15 170 22 167 167 R, L models 5 (2) 103 164 109 6 (3) Front Panel Unit 5 151 163 AMP Unit 6 (5) 167 167 J model 160 6 120 163 163 121 7 152 7 163 120 92 163 103
RX-V361/HTR-6030/DSP-AX361 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * s s s s s s s s s s s s s s Ref No. Part No.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 • FRONT PANEL UNIT Ref No. Part No.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 • AMP UNIT Ref No. Part No. 2-104 2-104 * * * * * * * 2-104 2-21 2 2-20 2-105 * 6 (2) * * * * * * * * * * 5 (1) 2-103 6 (11) 3 2-104 2-1 2-1 2-1 2-1 2-1 2-1 2-1 2-1 2-20 2-21 2-103 2-104 2-105 5 5 5 5 5 6 6 6 6 6 WJ641900 WJ642000 WJ642100 WJ642200 WJ642300 WJ642400 WJ642500 WG451000 WJ187700 WE774600 WF002600 WE774300 WJ645400 WJ645500 WJ645600 WJ645700 WJ645800 WJ643600 WJ643700 WJ643800 WJ643900 WJ644000 Description P.C.B.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 ■ REMOTE CONTROL ● RAV311 RX-V361 (U, C models), HTR-6030 (U, C models) RAV312 RX-V361 (R, T, K, A, L models), HTR-6030 (R, T, K, A models), DSP-AX361 (J model) • SCHEMATIC DIAGRAM • PANELS +3V 2 RAV311 RX-V361 (U, C models) HTR-6030 (U, C models) R3 R4 100 K-ohms R5 100 K-ohms R6 100 K-ohms 100 ohms REW (SEARCH -) REC FF (SEARCH +) LEFT RETURN SELECT 1 SKIP+ 2 4 PLAY PAUSE SKIP- STOP VOL down DISPLAY RIGHT DOWN 3 D1 3
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 • KEY NO. LAYOUT • KEY CODE Key No.
A B C D E F G H I J RX-V361/HTR-6030/DSP-AX361 1 ● RAV28 RX-V361 (B, G, E models), THR-6030 (G, E models) • SCHEMATIC DIAGRAM • PANEL • KEY CODE +3V 2 FREQ/TEXT DTV/CBL LEVEL STRAIGHT SCENE1 EON MD/CD-R D1 IR Diode 3 1 2 3 Q1 SMT R2 47 ohms 4 5 6 7 8 4 9 X1 4MHz R1 1 ohm C1 47uF 1 10 KI/O6 KI/O7 KI/O5 KI/O4 S0 KI/O3 SI/LED KI/O2 REM KI/O1 VDD KI/O0 Xout KI3 Xin KI2 GND KI1 S2 KI0 AUDIO SEL 20 SEEK-START SCENE3 VOLUME- DVD SLEEP PROG+ POWER ENTER
RX-V361/HTR-6030/DSP-AX361 RX-V361/HTR-6030/ DSP-AX361 99
RX-V361/HTR-6030/DSP-AX361