Owner`s manual

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 84
Network
IP Address Configures the network parameters (such as IP address). 92
Network Standby Selects whether to enable/disable the function that turns on the unit from other network devices. 92
MAC Address Filter Sets the MAC address filter to limit access to the unit from other network devices. 92
Network Name Edits the network name (the unit’s name on the network) displayed on other network devices. 93
Multi Zone
Main Zone Set Zone Rename Changes the zone name (for main zone) displayed on the TV screen. 93
Zone2 Set
Max Volume Sets the Zone2 maximum volume to prevent excessive loudness in the second zone. 94
Initial Volume Sets the Zone2 initial volume for when the unit is turned on. 94
Zone Rename Changes the zone name (for Zone2) displayed on the TV screen. 94
Function
Display Set
Dimmer (Front Display) Adjusts the brightness of the front display. 94
Short Message Selects whether to display short messages on the TV screen when the unit is operated. 94
Wallpaper Selects the image to be used as wallpaper on the TV. 95
Trigger Output
Trigger Mode Specifies the condition for the TRIGGER OUT jack to function. 95
Target Zone Specifies the zone with which the TRIGGER OUT jack functions are synchronized. 95
DC OUT Power Mode Selects how to supply power through the DC OUT jack. 95
Memory Guard Prevents accidental changes to the settings. 96
ECO
Auto Power Standby Sets the amount of time for the auto-standby function. 96
ECO Mode Enables/disables the eco mode (power saving mode). 96
Language Select an on-screen menu language. 97
Menu Item Function Page