HTR-6150_UC-cv.
01EN_HTR-6150_UC.book Page i Friday, February 1, 2008 11:21 AM IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
01EN_HTR-6150_UC.book Page ii Friday, February 1, 2008 11:21 AM IMPORTANT SAFETY INSTRUCTIONS d) 20 21 22 23 If the product does not operate normally by following the operating instructions.
01EN_HTR-6150_UC.book Page iii Friday, February 1, 2008 11:21 AM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. Caution: Read this before operating your unit. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
01EN_HTR-6150_UC.book Page 1 Friday, February 1, 2008 11:21 AM Contents Features ................................................................... 2 Getting started ........................................................ 3 Quick start guide .................................................... 4 PREPARATION Connections ............................................................. 9 Connecting the SiriusConnect™ tuner .................... 53 Activating SIRIUS Satellite Radio™ subscription..
01EN_HTR-6150_UC.book Page 2 Friday, February 1, 2008 11:21 AM Features Features Built-in 7-channel power amplifier Radio tuners ◆ Minimum RMS output power [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω) 90 W/ch [Other models] (1 kHz, 0.
01EN_HTR-6150_UC.book Page 3 Friday, February 1, 2008 11:21 AM Getting started Getting started ■ Installing batteries in the remote control Check that you received all of the following parts.
01EN_HTR-6150_UC.book Page 4 Friday, February 1, 2008 11:21 AM Quick start guide Quick start guide The following steps describe the easiest way to enjoy DVD movie playback in your home theater. Video monitor Front right speaker Front left speaker Prepare the following items. Subwoofer Surround right speaker Center speaker Surround back right speaker DVD player Surround back left speaker Surround left speaker ❏ Speakers ❏ Front speaker .....................................x 2 ❏ Center speaker ........
01EN_HTR-6150_UC.book Page 5 Friday, February 1, 2008 11:21 AM Quick start guide Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. Step 1: Set up your speakers Front and center speakers Loosen Insert INTRODUCTION Place your speakers in the room and connect them to this unit.
01EN_HTR-6150_UC.book Page 6 Friday, February 1, 2008 11:21 AM Quick start guide Step 2: Connect your DVD player and other components 3 SPEAKERS COAXIAL DTV/CBL IN2 DTV/CBL DTV/CBL CD CD 2 3 1 OUT HDMI DVD DIGITAL INPUT COMPONENT VIDEO PB PR Y XM PR PB SIRIUS AV receiver Video monitor OPTICAL OPTICAL DVD DVD IN1 REMOTE Connect the video cable to the video input jack of your video monitor and the VIDEO MONITOR OUT jack of this unit.
01EN_HTR-6150_UC.book Page 7 Friday, February 1, 2008 11:21 AM Quick start guide Step 3: Press SCENE 1 button Just by pressing one SCENE button, you can turn on this unit and recall your favorite input source and sound field program according to the SCENE template that has been assigned to the SCENE button. The SCENE templates are built combinations of input sources and sound field programs. y 1 Turn on the video monitor and then set the input source selector of the video monitor to this unit.
01EN_HTR-6150_UC.book Page 8 Friday, February 1, 2008 11:21 AM Quick start guide ■ After using this unit... Press A MAIN ZONE ON/OFF on the front panel to set this unit to the standby mode. What do you want to do with this unit? ■ Customizing the SCENE templates • Using various SCENE templates ☞ P. 30 • Creating your original SCENE templates ☞ P. 33 ■ Using various input sources • Basic controls of this unit ☞ P. 35 • Enjoying FM/AM radio programs ☞ P.
01EN_HTR-6150_UC.book Page 9 Friday, February 1, 2008 11:21 AM Connections Connections Rear panel 1 2 34 5 6 7 8 SPEAKERS OPTICAL DVD DVD IN1 DTV/CBL IN2 DTV/CBL CD 2 1 OUT 3 DIGITAL INPUT COMPONENT VIDEO HDMI REMOTE PREPARATION COAXIAL DVD PB PR Y XM PR PB SIRIUS DOCK ANTENNA DTV/CBL Y IN AM DVR SURROUND BACK/BI-AMP OUT GND R R SURROUND L L SINGLE +12V 15mA MAX. VIDEO VIDEO MONITOR OUT FM AC OUTLETS 75 UNBAL.
01EN_HTR-6150_UC.book Page 10 Friday, February 1, 2008 11:21 AM Connections Placing speakers The speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multichannel audio sources. C FR FL FR SW FL 30˚ SR C SL SR SL 60˚ SL 80˚ SBL SBR SR SBR SBL 30 cm (12 in) or more Front left and right speakers (FL and FR) The front speakers are used for the main source sound plus effect sounds.
01EN_HTR-6150_UC.book Page 11 Friday, February 1, 2008 11:21 AM Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. When you use single surround back speaker, connect the speaker to the left SURROUND BACK terminal (SINGLE).
01EN_HTR-6150_UC.book Page 12 Friday, February 1, 2008 11:21 AM Connections ■ Before connecting to the SPEAKERS terminal A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe, groove or ridges. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the plain cable to the “–” (black) terminals.
01EN_HTR-6150_UC.book Page 13 Friday, February 1, 2008 11:21 AM Connections Information on jacks and cable plugs Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.
01EN_HTR-6150_UC.book Page 14 Friday, February 1, 2008 11:21 AM Connections Information on HDMI™ ■ HDMI compatibility with this unit Audio signal types Audio signal formats Compatible HDMI components 2ch Linear PCM 2ch, 32-192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio, etc. Multi-ch Linear PCM 8ch, 32-192 kHz, 16/20/24 bit DVD-Audio, etc. Bitstream Dolby Digital, DTS DVD-Video, etc. This unit’s HDMI interface is based on the following standards: • HDMI Version 1.
01EN_HTR-6150_UC.book Page 15 Friday, February 1, 2008 11:21 AM Connections Audio and video signal flow ■ Audio signal flow Input ■ Video signal flow Output Input Output HDMI HDMI AUDIO PREPARATION COMPONENT VIDEO Digital output Analog output S VIDEO VIDEO Notes • 2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN DVD or HDMI IN DTV/ CBL jack can be output at the HDMI OUT jack only when “SUPPORT AUDIO” is set to “Other” (see page 70).
01EN_HTR-6150_UC.book Page 16 Friday, February 1, 2008 11:21 AM Connections Connecting video components Connect your TV (or projector) to the HDMI OUT jack, the COMPONENT VIDEO MONITOR OUT jacks, the S VIDEO MONITOR OUT jack or the VIDEO MONITOR OUT jack of this unit. Notes • Some video monitors connected to this unit via a DVI connection fail to recognize the HDMI audio/video signals being input if they are in the standby mode. In this case, the HDMI indicator flashes irregularly.
01EN_HTR-6150_UC.book Page 17 Friday, February 1, 2008 11:21 AM Connections Connecting other components Make sure that this unit and other components are unplugged from the AC wall outlets. Notes • When “VIDEO CONV.” is set to “OFF” (see page 73), be sure to make the same type of video connections as those made for your TV (see page 16). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.
01EN_HTR-6150_UC.book Page 18 Friday, February 1, 2008 11:21 AM Connections ■ Connecting a DVD recorder, PVR or VCR DVD DVD IN1 DTV/CBL IN2 DTV/CBL CD 2 1 OUT 3 DIGITAL INPUT COMPONENT VIDEO HDMI REMOTE DVD PR PB Y XM PR SIRIUS DTV/CBL Y PB IN DVR OUT +12V 15mA MAX.
01EN_HTR-6150_UC.book Page 19 Friday, February 1, 2008 11:21 AM Connections Connecting audio components Connect the audio components as follows. Make sure that this unit and other components are unplugged from the AC wall outlets. ■ Connecting a CD player and a CD recorder/MD recorder Notes • When you connect your CD player via analog and digital connection, priority is given to the signal input at the DIGITAL INPUT jack.
01EN_HTR-6150_UC.book Page 20 Friday, February 1, 2008 11:21 AM Connections Connecting a Yamaha iPod™ universal dock or Bluetooth™ adapter Make sure that this unit and other components are unplugged from the AC wall outlets. Using REMOTE IN/OUT jacks When the components are the Yamaha products and have the capability of the transmission of the remote control signals, connect the REMOTE IN jack and REMOTE OUT jack to the remote control input and output jack with the monaural analog mini cable as follows.
01EN_HTR-6150_UC.book Page 21 Friday, February 1, 2008 11:21 AM Connections Using the VIDEO AUX jacks on the front panel Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit. Caution Be sure to turn down the volume of this unit and other components before making connections. Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit. Connect each antenna correctly to the designated terminals.
01EN_HTR-6150_UC.book Page 22 Friday, February 1, 2008 11:21 AM Connections Connecting the wire of the AM loop antenna Open the lever Insert Close the lever Connecting the power cable Once all connections are complete, plug the power cable into the AC wall outlet. (U.S.A. model) y The wire of the AM loop antenna does not have any polarity and you can connect either end of the wire to AM or GND terminal.
01EN_HTR-6150_UC.book Page 23 Friday, February 1, 2008 11:21 AM Connections Setting the speaker impedance Caution If you are to use 6 ohm speakers, set “SP IMP.” to “6Ω MIN” as follows BEFORE using this unit. 1 Press and hold N TONE CONTROL and then press A MAIN ZONE ON/OFF to turn on this unit. This unit turns on, and the advanced setup menu appears in the front panel display.
01EN_HTR-6150_UC.book Page 24 Friday, February 1, 2008 11:21 AM Connections Front panel display Note The XM and SIRIUS indicator is only applicable to the U.S.A. and Canada models and the cursor on the left of the XM indicator or SIRIUS indicator lights up only when “XM” or “SIRIUS” is selected as the input source.
01EN_HTR-6150_UC.book Page 25 Friday, February 1, 2008 11:21 AM Connections D CINEMA DSP indicator Lights up when you select a sound field program (see page 41). ■ Using the remote control The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. VIRTUAL indicator Lights up when Virtual CINEMA DSP is active (see page 41).
01EN_HTR-6150_UC.book Page 26 Friday, February 1, 2008 11:21 AM Optimizing the speaker setting for your listening room Optimizing the speaker setting for your listening room This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you avoid troublesome listening-based speaker setup and achieves highly accurate sound adjustments automatically.
01EN_HTR-6150_UC.book Page 27 Friday, February 1, 2008 11:21 AM Optimizing the speaker setting for your listening room 4 Make sure that “SETUP” is set to “AUTO” and the pointer is pointing at “START”. y You can also select the following setup methods. In this case, press 8 k to select “SETUP”, press 8 l / h to select the one of the following choises and then select “START”. Note “RELOAD” or “UNDO” is available only when you have previously run “AUTO SETUP” and confirmed the results.
01EN_HTR-6150_UC.book Page 28 Friday, February 1, 2008 11:21 AM Optimizing the speaker setting for your listening room The display changes as follows. 7 Press 8 k and 8 ENTER to display the setup results in detail. 8 Press 8 l / h repeatedly to toggle between the setup result displays. AUTO SETUP SETUP;;;;;;;AUTO .
01EN_HTR-6150_UC.book Page 29 Friday, February 1, 2008 11:21 AM Optimizing the speaker setting for your listening room 10 11 Press 8 n and then press 8 l / h to select “SET” or “CANCEL”. Choices: SET, CANCEL • Select “SET” to confirm the “AUTO SETUP” results. • Select “CANCEL” to cancel the “AUTO SETUP” results. Press 8 ENTER to confirm your selection. The top “SET MENU” display appears in the OSD.
01EN_HTR-6150_UC.book Page 30 Friday, February 1, 2008 11:21 AM SELECTING THE SCENE TEMPLATES Selecting the SCENE templates This unit is equipped with 17 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button: 2 Press R INPUT l / h (or press 5 AMP and then press 8l / h) to select the desired template.
01EN_HTR-6150_UC.
01EN_HTR-6150_UC.book Page 32 Friday, February 1, 2008 11:21 AM Selecting the SCENE templates ■ Preset SCENE templates descriptions The illustrations of the SCENE button in the following table indicate the assigned SCENE buttons in the default setting. SCENE template Input source Playback mode Features DVD Viewing DVD* STRAIGHT DVD Movie Viewing DVD* MOVIE Movie Dramatic Select this SCENE template when you play back movies on your DVD player.
01EN_HTR-6150_UC.book Page 33 Friday, February 1, 2008 11:21 AM Selecting the SCENE templates Creating your original SCENE templates 3 You can create your original SCENE templates for each SCENE button. You can refer to the preset 17 SCENE templates to create the original SCENE templates.
01EN_HTR-6150_UC.book Page 34 Friday, February 1, 2008 11:21 AM Selecting the SCENE templates Using remote control on the SCENE feature ■ Controlling the input source components in the SCENE mode ■ Setting input source of the customized SCENE template on the remote control You can operate both this unit and the input source component by using the remote control. You must set the appropriate remote control code for each input source in advance (see page 78).
01EN_HTR-6150_UC.book Page 35 Friday, February 1, 2008 11:21 AM PLAYBACK Playback Caution Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a DTS-incompatible CD player, you will only hear some unwanted noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of your CD player before you play back a CD encoded in DTS.
01EN_HTR-6150_UC.book Page 36 Friday, February 1, 2008 11:21 AM Playback Selecting audio input jacks (AUDIO SELECT) Selecting the MULTI CH INPUT component This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to as the same input source. y • We recommend setting the audio input jack select to “AUTO” in most cases.
01EN_HTR-6150_UC.book Page 37 Friday, February 1, 2008 11:21 AM Playback Displaying the current status of this unit on a video monitor You can display the operating information of this unit on a video monitor. 1 Turn on the video monitor connected to this unit. 2 Press O DISPLAY. The current status screen appears in the OSD. Using your headphones Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.
01EN_HTR-6150_UC.book Page 38 Friday, February 1, 2008 11:21 AM Playback Playing video sources in the background of an audio source You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Press the input selector buttons (4) to select a video source and then an audio source.
01EN_HTR-6150_UC.book Page 39 Friday, February 1, 2008 11:21 AM Playback Using the sleep timer Use this feature to automatically set the main zone to the standby mode after a certain amount of time. Press 5 AMP and then press T SLEEP repeatedly to set the amount of time. Each time you press N SLEEP, the front panel display changes as shown below. SLEEP 120min SLEEP OFF SLEEP 30min SLEEP 90min SLEEP 60min The SLEEP indicator flashes while you are switching the amount of time for the sleep timer.
01EN_HTR-6150_UC.book Page 40 Friday, February 1, 2008 11:21 AM SOUND FIELD PROGRAMS Sound field programs This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. Press O PROGRAM l / h (or press 5 AMP and then press B PROG l / h repeatedly). The name of the selected sound field program appears in the front panel display.
01EN_HTR-6150_UC.book Page 41 Friday, February 1, 2008 11:21 AM Sound field programs ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press 5 AMP and then press QSUR. DECODE repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference.
01EN_HTR-6150_UC.book Page 42 Friday, February 1, 2008 11:21 AM Sound field programs ■ Editing sound fields parameters y You can enjoy good quality sound with the factory default parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. For Pop/Rock, Hall, Jazz, Game, TV Sports, Movie Spacious and Movie Dramatic: 1 While listening to a source, press 5 AMP and then press SPARAMETER.
01EN_HTR-6150_UC.book Page 43 Friday, February 1, 2008 11:21 AM USING AUDIO FEATURES Using audio features Enjoying high quality sound Use the DIRECT mode to enjoy the high quality sounds of the selected source. When the DIRECT mode is activated, this unit plays back the selected source with the least circuitry. Adjusting the speaker level You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources input at the MULTI CH INPUT jacks.
01EN_HTR-6150_UC.book Page 44 Friday, February 1, 2008 11:21 AM Using audio features Selecting the night listening mode The night listening modes are designed to improve listenability at lower volumes or at night. 1 Press 5 AMP and then R NIGHT repeatedly to select “NIGHT:CINEMA” or “NIGHT:MUSIC”. Choices: NIGHT:CINEMA, NIGHT:MUSIC, OFF • Select “NIGHT:CINEMA” when watching films to reduce the dynamic range of film soundtracks and make dialog easier to hear at lower volumes.
01EN_HTR-6150_UC.book Page 45 Friday, February 1, 2008 11:21 AM FM/AM TUNING FM/AM tuning There are 2 tuning methods: automatic and manual. Automatic tuning is effective when station signals are strong and there is no interference. If the signal from the station you want to select is weak, tune into it manually. You can also use the automatic and manual preset tuning features to store up to 40 stations.
01EN_HTR-6150_UC.book Page 46 Friday, February 1, 2008 11:21 AM FM/AM tuning Automatic preset tuning You can use the automatic preset tuning feature to store FM stations with strong signals up to 40 (A1 to E8: 8 preset station numbers in each of the 5 preset station groups) of those stations in order. You can then recall any preset station easily by selecting the preset station number. 1 2 3 Press RINPUT l / h repeatedly so that “TUNER” is displayed in the front panel display.
01EN_HTR-6150_UC.book Page 47 Friday, February 1, 2008 11:21 AM FM/AM tuning Selecting preset stations You can tune into any desired station simply by selecting the preset station group and number under which it was stored. y When performing this operation with the remote control, press 4 TUNER to select “TUNER” as the input source. 1 2 Press FA/B/C/D/E (or 8A-E/CAT. l / h) repeatedly to select the desired preset station group (A to E).
01EN_HTR-6150_UC.book Page 48 Friday, February 1, 2008 11:21 AM XM SATELLITE RADIO TUNING XM Satellite Radio tuning XM Radio offers an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio, stand-up comedy, children’s and entertainment programming. XM is broadcast in superior digital audio quality from coast to coast. From rock to reggae, from classical to hip hop, XM has something for every music fan. XM Satellite Radio online information For U.S.
01EN_HTR-6150_UC.book Page 49 Friday, February 1, 2008 11:21 AM XM Satellite Radio tuning Activating XM Satellite Radio Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM MiniTuner Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three places to find your eight character XM Radio ID: on the XM MiniTuner, on the XM Mini-Tuner package, and on XM Channel 0.
01EN_HTR-6150_UC.book Page 50 Friday, February 1, 2008 11:21 AM XM Satellite Radio tuning y Before performing operations, press 3 XM to select “XM” as the input source. 3 ■ All Channel Search mode 1 2 Press D SEARCH MODE (or M SRCH MODE) repeatedly to select “ALL CH SEARCH”. Press G PRESET/TUNING/CH l / h (or 8 PRESET/CH k / n) repeatedly to search for a channel within all channels. y Press G PRESET/TUNING/CH l / h (or 8 PRESET/CH k / n) repeatedly to change the preset channel number (1 to 8).
01EN_HTR-6150_UC.book Page 51 Friday, February 1, 2008 11:21 AM XM Satellite Radio tuning Setting XM Satellite Radio preset channels 3 You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 50.
01EN_HTR-6150_UC.book Page 52 Friday, February 1, 2008 11:21 AM XM Satellite Radio tuning Displaying the XM Satellite Radio information You can display the XM Satellite Radio information (such as channel number, channel name, category, artist name, or song title) for the currently selected channel in the front panel display or in the OSD.
01EN_HTR-6150_UC.book Page 53 Friday, February 1, 2008 11:21 AM SIRIUS SATELLITE RADIO™ TUNING SIRIUS Satellite Radio™ tuning SIRIUS Satellite Radio provides over 130 channels of exclusive entertainment and 100% commercial-free music. Only SIRIUS has more than 65 original music channels, from today's hits to R&B, oldies and classical masterpieces. From authentic country and real bluegrass to cool jazz, hot latin, reggae, rock and many more. Best of all, it’s all 100% commercial-free.
01EN_HTR-6150_UC.book Page 54 Friday, February 1, 2008 11:21 AM SIRIUS Satellite Radio™ tuning Activating SIRIUS Satellite Radio™ subscription Before using the SIRIUS Satellite feature, you need to activate your SIRIUS Satellite Radio subscription. To activate the subscription, you need the Sirius ID, which is uniquely assigned to the SiriusConnect tuner.
01EN_HTR-6150_UC.book Page 55 Friday, February 1, 2008 11:21 AM SIRIUS Satellite Radio™ tuning Before performing the following operations, press K SIRIUS. ■ All Channel Search mode 1 Press D SEARCH MODE (or M SRCH MODE) repeatedly to select “ALL CH SEARCH”. 2 Press G PRESET/TUNING/CH l / h (or 8 PRESET/CH k / n) repeatedly to search for a channel within all channels. y ■ Category Search mode 1 Press D SEARCH MODE (or M SRCH MODE) repeatedly to select “CAT SEARCH”.
01EN_HTR-6150_UC.book Page 56 Friday, February 1, 2008 11:21 AM SIRIUS Satellite Radio™ tuning Before performing the following operations, press K SIRIUS. 4 Setting the SIRIUS Satellite Radio™ preset channels Press G PRESET/TUNING/CH l / h (or 8 PRESET/CH k / n) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing. The preset channel number appears in the front panel display.
01EN_HTR-6150_UC.book Page 57 Friday, February 1, 2008 11:21 AM SIRIUS Satellite Radio™ tuning 3 4 Note Press 8 n repeatedly to select “OPTION MENU” and then press 8 ENTER. Press 8 k / n repeatedly to select “G)SIRIUS SET” and then press 8 ENTER. The following menu screen appears. In the SIRIUS Satellite Radio channel list screen, this unit outputs the sound of the selected channel even if the channel is locked. Only the first eight characters of each channel name are displayed in the list.
01EN_HTR-6150_UC.book Page 58 Friday, February 1, 2008 11:21 AM SIRIUS Satellite Radio™ tuning Before performing the following operations, press K SIRIUS. Displaying the SIRIUS Satellite Radio™ information You can display the SIRIUS Satellite Radio information (such as channel number, channel name, category, artist name, composer name, or song title) for the currently selected channel in the front panel display or in the OSD.
01EN_HTR-6150_UC.book Page 59 Friday, February 1, 2008 11:21 AM USING IPOD™ Using iPod™ Once you have stationed your iPod in a Yamaha iPod universal dock (such as YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 20), you can enjoy playback of your iPod using the supplied remote control. You can also use the Compressed Music Enhancer mode of this unit to improve the sound quality of the compression artifacts (such as the MP3 format) stored on your iPod (see page 20).
01EN_HTR-6150_UC.book Page 60 Friday, February 1, 2008 11:21 AM Using iPod™ ■ Controlling iPod in the menu browse mode You can perform the advanced operations of your iPod using the supplied remote control when you connect this unit and a monitor using the S VIDEO or VIDEO connection. You can browse the songs stored on your iPod in the OSD. Further, you can change or adjust settings for your iPod to suit your personal preferences.
01EN_HTR-6150_UC.book Page 61 Friday, February 1, 2008 11:21 AM USING BLUETOOTH™ COMPONENTS Using Bluetooth™ components You can connect a Yamaha Bluetooth adapter (such as YBA-10, sold separately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth component. You need to perform “pairing” the connected Bluetooth adapter and your Bluetooth component in advance.
01EN_HTR-6150_UC.book Page 62 Friday, February 1, 2008 11:21 AM RECORDING Recording Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes • When this unit is set to the standby mode, you cannot record between other components connected to this unit. • TONE CONTROL (see page 43) and VOLUME settings, speaker levels (see page 43) and the sound field programs (see page 40) do not affect recorded material.
01EN_HTR-6150_UC.book Page 63 Friday, February 1, 2008 11:21 AM SET MENU SET MENU You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment. ■ Auto setup AUTO SETUP Use this feature to automatically adjust speaker and system parameters (see page 26).
01EN_HTR-6150_UC.book Page 64 Friday, February 1, 2008 11:21 AM SET MENU Option menu 3 OPTION MENU Parameter Features Page A)DISPLAY SET Adjusts the brightness of the front panel display and the way in which the XM and iPod information is displayed. 73 B)MEMORY GUARD Locks sound field program parameters and other “SET MENU” settings.
01EN_HTR-6150_UC.book Page 65 Friday, February 1, 2008 11:21 AM SET MENU 1 SOUND MENU Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors. ;MANUAL SETUP Front speakers FRONT SP Choices: SMALL, LARGE ;MANUAL SETUP 1 SOUND MENU 1/2 1 SOUND MENU 2/2 . F)DYNAMIC RANGE G)AUDIO SET H)HDMI SET I)EXTD SUR. 1 SOUND MENU A)SPEAKER SET FRONT SP p p [ ]/[ ]:Up/Down [ENTER]:Enter p p .
01EN_HTR-6150_UC.book Page 66 Friday, February 1, 2008 11:21 AM SET MENU Surround left/right speakers Choices: NONE, SML, LRG SUR. L/R SP LFE Bass out LFE/BASS OUT Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR, FRNT, BOTH 1 SOUND MENU A)SPEAKER SET SUR. L/R SP 1 SOUND MENU A)SPEAKER SET LFE/BASS OUT NONE >SML LRG SWFR FRNT>BOTH When the surround speakers are large Select “LRG” (large).
01EN_HTR-6150_UC.book Page 67 Friday, February 1, 2008 11:21 AM SET MENU Crossover CROSSOVER Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see page 65). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of “LFE/BASS OUT” in “SPEAKER SET” (see page 65).
01EN_HTR-6150_UC.book Page 68 Friday, February 1, 2008 11:21 AM SET MENU ■ Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations.
01EN_HTR-6150_UC.book Page 69 Friday, February 1, 2008 11:21 AM SET MENU ■ Dynamic range F)DYNAMIC RANGE Use this feature to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when this unit is decoding Dolby Digital and DTS signals. 1 SOUND MENU F)DYNAMIC RANGE . SPEAKER;;;;;;MAX HEADPHONE;;;;MAX p p [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker SPEAKER Adjusts the speaker compression.
01EN_HTR-6150_UC.book Page 70 Friday, February 1, 2008 11:21 AM SET MENU ■ HDMI set H)HDMI SET ■ Extended surround I)EXTD SUR. Use this feature to select the component to play back HDMI audio signals. 1 SOUND MENU I)EXTD SUR. . >AUTO LAST EXTD SUR.;;;;;;AUTO 1 SOUND MENU H)HDMI SET [p]/[[]:Select [ENTER]:Return SUPPORT AUDIO: HTR-6150 [p]/[[]:Select [ENTER]:Return Support audio S.
01EN_HTR-6150_UC.book Page 71 Friday, February 1, 2008 11:21 AM SET MENU 2 INPUT MENU Use this menu to reassign the input jacks, select the decoder mode or rename the input source. For HDMI jacks 1 and 2 HDMI IN [1] HDMI IN [2] Choices: (1) DVD, DTV/CBL, V-AUX, DVR (2) DVD, DTV/CBL, V-AUX, DVR ;MANUAL SETUP 2 INPUT MENU 2 INPUT MENU A)INPUT ASSIGNMENT HDMI IN . [IN1];;; DVD ( DVD ) [IN2];;;DTV/CBL (DTV/CBL ) p p .
01EN_HTR-6150_UC.book Page 72 Friday, February 1, 2008 11:21 AM SET MENU 4 Repeat steps 1 through 3 to rename each input source. 5 Press 8 ENTER to exit from “INPUT RENAME”. ■ Volume trim C)VOLUME TRIM Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, DOCK, MULTI CH, XM, SIRIUS Control range: –6.
01EN_HTR-6150_UC.book Page 73 Friday, February 1, 2008 11:21 AM SET MENU 3 OPTION MENU Use this menu to adjust the optional system parameters. ;MANUAL SETUP ;MANUAL SETUP 3 OPTION MENU 1/2 . A)DISPLAY SET B)MEMORY GUARD C)AUDIO SELECT D)PARAM. INI 3 OPTION MENU 2/2 E)BLUETOOTH SET .
01EN_HTR-6150_UC.book Page 74 Friday, February 1, 2008 11:21 AM SET MENU ■ Memory guard B)MEMORY GUARD Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON ■ Parameter initialization D)PARAM. INI Use this feature to set all the parameters of the sound field programs to the initial factory settings. Choices: NO, YES 3 OPTION MENU 3 OPTION MENU B)MEMORY >OFF D)PARAM.
01EN_HTR-6150_UC.book Page 75 Friday, February 1, 2008 11:21 AM SET MENU ■ Bluetooth setting E)BLUETOOTH SET ■ XM Radio setting F)XM RADIO SET (U.S.A. and Canada models only) 3 OPTION MENU 3 OPTION MENU E)BLUETOOTH SET START PAIRING F)XM RADIO SET XM ANTENNA;;;95% [ENTER]:Enter [ENTER]:Return Use this feature to start pairing the connected Yamaha Bluetooth adapter (such as YBA-10, sold separately) with your Bluetooth component.
01EN_HTR-6150_UC.book Page 76 Friday, February 1, 2008 11:21 AM Remote control features Remote control features In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input source (see page 78).
01EN_HTR-6150_UC.book Page 77 Friday, February 1, 2008 11:21 AM Remote control features ■ Controlling other components Press one of the input selector buttons (4) or A to C buttons to control other components. You must set the appropriate remote control code for each input source in advance (see page 78). The following table shows the function of each control button used to control other components assigned to each input selector button.
01EN_HTR-6150_UC.book Page 78 Friday, February 1, 2008 11:21 AM Remote control features Setting remote control codes 1 You can control other components by setting the appropriate remote control codes. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual. While pressing and holding one of the input selector buttons (4) on the remote control to select the input area you want to set up, press 2 AV POWER for more than 3 seconds.
01EN_HTR-6150_UC.book Page 79 Friday, February 1, 2008 11:21 AM Using multi-zone configuration Using multi-zone configuration This unit allows you to configure a multi-zone audio system. The Zone 2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone 2). You can control this unit from the second zone using the supplied remote control. Only analog signals are sent to the second zone.
01EN_HTR-6150_UC.book Page 80 Friday, February 1, 2008 11:21 AM Using multi-zone configuration Controlling Zone 2 You can select and control Zone 2 by using the control buttons on the front panel or on the remote control. The available operations are as follows: • Selecting the input source of Zone 2. • Tuning into FM or AM when “TUNER” is selected as the input source of Zone 2 (see page 45). • Tuning into XM Satellite Radio when “XM” is selected as the input source of Zone 2 (see page 48) (U.S.A.
01EN_HTR-6150_UC.book Page 81 Friday, February 1, 2008 11:21 AM Using multi-zone configuration Operate the following operations after activating the Zone 2 operation mode. ■ Controlling Zone 2 with the remote control Operating Zone 2 Turning on Zone 2 Press R INPUT l / h to select the desired input source while the ZONE2 indicator is flashing in the front panel display. While pressing and holding 5 AMP, press H POWER. • Select “TUNER” as the input source to use the TUNER features in Zone 2.
01EN_HTR-6150_UC.book Page 82 Friday, February 1, 2008 11:21 AM Advanced setup Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.
01EN_HTR-6150_UC.book Page 83 Friday, February 1, 2008 11:21 AM Advanced setup ■ SCENE IR code setting SCENE IR Use this feature to output the remote control signals at the REMOTE OUT jack automatically when this unit is in the SCENE mode. Choices: ON, OFF • Select “ON” when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component.
01EN_HTR-6150_UC.book Page 84 Friday, February 1, 2008 11:21 AM Troubleshooting Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General Problem This unit fails to turn on or enters the standby mode soon after the power is turned on. No sound.
01EN_HTR-6150_UC.book Page 85 Friday, February 1, 2008 11:21 AM Troubleshooting Problem The sound suddenly goes off. Cause Remedy See page 23 Check that the speaker wires are not touching each other and then turn this unit back on. — The sleep timer has turned off this unit. Turn on this unit, and play the source again. — The sound is muted. Press JMUTE or N VOLUME +/– to resume audio output. 37 Sound is heard from the speaker on one side only. Incorrect cable connections.
01EN_HTR-6150_UC.book Page 86 Friday, February 1, 2008 11:21 AM Troubleshooting Problem Cause Remedy See page Dolby Digital or DTS sources cannot be played. (Dolby Digital or DTS indicator in the front panel display does not light up.) The connected component is not set to output Dolby Digital or DTS digital signals. Make an appropriate setting following the operating instructions for your component. — Audio input jack select is set to “ANALOG”. Set Audio input jack select to “AUTO”.
01EN_HTR-6150_UC.book Page 87 Friday, February 1, 2008 11:21 AM Troubleshooting ■ Tuner Problem FM stereo reception is noisy. FM AM Cause The characteristics of FM stereo broadcasts may cause this problem when the transmitter is too far away or the antenna input is poor. Remedy See page Check the antenna connections. 21 Try using a high-quality directional FM antenna. — Use the manual tuning method. 45 There is distortion, and clear reception cannot be obtained even with a good FM antenna.
01EN_HTR-6150_UC.book Page 88 Friday, February 1, 2008 11:21 AM Troubleshooting ■ XM Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page CHECK XM TUNER The XM Mini-Tuner is not installed in the XM Mini-Tuner Dock or the XM MiniTuner Dock is not connected to this unit.
01EN_HTR-6150_UC.book Page 89 Friday, February 1, 2008 11:21 AM Troubleshooting ■ SIRIUS Satellite Radio If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel display. In this case, read the cause and follow the corresponding remedies. Status message Cause Remedy See page ANTENNA ERROR The antenna is not connected to the SiriusConnect tuner properly. Check the connection of the antenna and SiriusConnect tuner.
01EN_HTR-6150_UC.book Page 90 Friday, February 1, 2008 11:21 AM Troubleshooting ■ AUTO SETUP Before AUTO SETUP Error message Connect MIC! Unplug HP! Cause Optimizer microphone is not connected. Headphones are connected. Remedy See page Connect the supplied optimizer microphone to the OPTIMIZER MIC jack on the front panel. 26 Unplug the headphones. — During AUTO SETUP Error message Cause Remedy See page E-1:NO FRONT SP Front L/R channel signals are not detected.
01EN_HTR-6150_UC.book Page 91 Friday, February 1, 2008 11:21 AM Troubleshooting After AUTO SETUP Warning message Cause Remedy See page W-1:OUT OF PHASE Speaker polarity is not correct. This message may appear depending on the speakers even when the speakers are connected correctly. Check the speaker connections for proper polarity (+ or –). 12 W-2:OVER 24m (80ft) The distance between the nearest speaker and the furthest speaker is out of adjustable range.
01EN_HTR-6150_UC.book Page 92 Friday, February 1, 2008 11:21 AM Troubleshooting ■ Bluetooth Status message Searching... Cause Remedy See page The Bluetooth adapter and the Bluetooth component is in the middle of the pairing. The Bluetooth adapter and the Bluetooth component is in the middle of establishing the connection. Completed The paring is completed. Canceled The paring is canceled.
01EN_HTR-6150_UC.book Page 93 Friday, February 1, 2008 11:21 AM Troubleshooting ■ Remote control Problem The remote control does not work nor function properly. Cause Remedy See page Wrong distance or angle. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. 25 Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit.
01EN_HTR-6150_UC.book Page 94 Friday, February 1, 2008 11:21 AM Glossary Glossary ■ Bi-amplification connection ■ Dolby Digital A bi-amplification connection uses two amplifiers for a speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined mid and tweeter section. With this arrangement each amplifier operates over a restricted frequency range.
01EN_HTR-6150_UC.book Page 95 Friday, February 1, 2008 11:21 AM Glossary ■ Dolby Surround ■ LFE 0.1 channel Dolby Surround uses a 4-channel analog recording system to reproduce realistic and dynamic sound effects: 2 front left and right channels (stereo), a center channel for dialog (monaural), and a surround channel for special sound effects (monaural). The surround channel reproduces sound within a narrow frequency range.
01EN_HTR-6150_UC.book Page 96 Friday, February 1, 2008 11:21 AM Glossary ■ SILENT CINEMA Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for each sound field so that accurate representations of all the sound field programs can be enjoyed on headphones.
01EN_HTR-6150_UC.book Page 97 Friday, February 1, 2008 11:21 AM Specifications Specifications AUDIO SECTION • Minimum RMS Output Power for Front, Center, Surround, Surround Back [U.S.A. and Canada models] 1 kHz, 0.9% THD, 8 Ω ...................................................... 90 W [Other models] 1 kHz, 0.9% THD, 6 Ω ...................................................... 90 W • Maximum Power for Front, Center, Surround, Surround Back (JEITA) [U.S.A. and Canada models] 1 kHz, 10% THD, 8 Ω ..............
01EN_HTR-6150_UC.book Page 98 Friday, February 1, 2008 11:21 AM INDEX Index ■ Symbols - - -, XM tuning status message ............... 88 Bluetooth setting, Option menu ...........75 BT connected, Bluetooth status message .................92 ■ ■ Numerics 1 SOUND MENU, Manual setup ........ 63 2 INPUT MENU, Manual setup .......... 63 2ch Stereo, Sound field program ......... 40 3 OPTION MENU ............................... 73 3 OPTION MENU, Manual setup .......
01EN_HTR-6150_UC.book Page 99 Friday, February 1, 2008 11:21 AM Index E)XM RADIO SET, Option menu .................................... 75 E-1:NO FRONT SP, Auto setup error message ................ 90 E-2:NO SURR.SP, Auto setup error message ................ 90 E-3:SBR->SBL, Auto setup error message ................ 90 E-4:NOISY, Auto setup error message ................ 90 E-5:CHECK SUR., Auto setup error message ................ 90 E-6:NO MIC, Auto setup error message ................
01EN_HTR-6150_UC.book Page 100 Friday, February 1, 2008 11:21 AM Index Parameter initialization, Option menu .................................... 74 PARENTAL LOCK, SIRIUS Satellite Radio setting .................................... 75 PCM indicator ...................................... 24 PHONES jack ...................................... 37 Play information display, iPod controlling ............................... 60 Playing video sources in the background ............................ 38 PLII Game .....
01EN_HTR-6150_UC.book Page 101 Friday, February 1, 2008 11:21 AM Index ■ X XM ANTENNA, XM Radio setting ............................. 75 XM Mini-Tuner Dock .......................... 48 XM Radio antenna, XM Radio setting ............................. 75 XM Radio setting, Option menu .................................... 75 XM Satellite Radio tuning ................... 48 XM Satellite Radio, Status message ................................. 88 ■ Y Yamaha iPod universal dock, Connection .................
02FR_HTR-6150_UC.book Page i Friday, February 1, 2008 11:27 AM PRÉCAUTIONS CONCERNANT LA SÉCURITÉ PRÉCAUTIONS CONCERNANT LA SÉCURITÉ 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: POUR RÉDUIRE LES RISQUES D’INCENDIE ET DE DÉCHARGE ELECTRIQUE, NE PAS RETIRER LE COUVERCLE (OU LE PANNEAU ARRIÈRE). AUCUNE PIÈCE INTERNE NE PEUT ÊTRE CHANGÉE PAR L’UTILISATEUR. POUR L’ENTRETIEN, S’ADRESSER À UN PERSONNEL QUALIFIÉ.
02FR_HTR-6150_UC.book Page ii Friday, February 1, 2008 11:27 AM PRÉCAUTIONS CONCERNANT LA SÉCURITÉ d) 20 21 22 23 Ce produit ne fonctionne pas selon les instructions du manuel.
02FR_HTR-6150_UC.book Page iii Friday, February 1, 2008 11:27 AM ATTENTION: VEUILLEZ LIRE CE QUI SUIT AVANT D’UTILISER L’APPAREIL. Attention: Veuillez lire ce qui suit avant d’utiliser l’appareil. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pour utiliser l’appareil au mieux de ses possibilités, lisez attentivement ce mode d’emploi. Conservez-le soigneusement pour référence.
02FR_HTR-6150_UC.book Page 1 Friday, February 1, 2008 11:27 AM Table des matières Description .............................................................. 2 Préparatifs............................................................... 3 Guide de démarrage rapide ................................... 4 PRÉPARATIONS Raccordements........................................................ 9 Utilisation de AUTO SETUP .................................. 26 OPÉRATIONS DE BASE Sélection du modèle de SCENE souhaité...
02FR_HTR-6150_UC.book Page 2 Friday, February 1, 2008 11:27 AM Description Description Amplificateur intégré à 7 voies HDMI (Interface multimédia à haute définition) ◆ Puissance minimum de sortie efficace [Modèles pour les États-Unis et le Canada] (1 kHz, DHT 0,9%, 8 Ω) 90 W/voie [Autres modèles] (1 kHz, DHT 0,9%, 6 Ω) 90 W/voie ◆ Interface HDMI pour vidéos standard, améliorées et haute définition (avec transmission du signal vidéo 1080p) et son numérique multivoies compatible avec la version HDMI 1.
02FR_HTR-6150_UC.book Page 3 Friday, February 1, 2008 11:27 AM Préparatifs Préparatifs Veuillez vous assurer que vous possédez bien les articles suivants.
02FR_HTR-6150_UC.book Page 4 Friday, February 1, 2008 11:27 AM Guide de démarrage rapide Guide de démarrage rapide Les étapes suivantes indiquent la meilleure façon de procéder pour profiter au maximum de vos DVD dans votre ambiance de cinéma domestique. Moniteur vidéo Enceinte avant droite Caisson de graves Enceinte avant gauche Enceinte d’ambiance droite Enceinte centrale Enceinte d’ambiance arrière droite Lecteur DVD Enceinte d’ambiance arrière gauche Préparez les articles suivants.
02FR_HTR-6150_UC.book Page 5 Friday, February 1, 2008 11:27 AM Guide de démarrage rapide Assurez-vous que la voie gauche (L), la voie droite (R) et les pôles “+” (rouge) et “–” (noir) sont convenablement reliés. Étape 1: Installez vos enceintes Enceintes avant et centrale INTRODUCTION Installez vos enceintes dans la pièce et raccordez-les à cet appareil.
02FR_HTR-6150_UC.book Page 6 Friday, February 1, 2008 11:27 AM Guide de démarrage rapide Étape 2: Raccordez votre lecteur de DVD et les autres appareils 3 Raccordez le câble vidéo à la prise d’entrée vidéo de votre moniteur vidéo et à la prise VIDEO MONITOR OUT de cet appareil.
02FR_HTR-6150_UC.book Page 7 Friday, February 1, 2008 11:27 AM Guide de démarrage rapide Étape 3: Appuyez sur le touche SCENE 1 1 Mettez le moniteur vidéo sous tension, puis réglez le sélecteur de source d’entrée du moniteur vidéo sur cet appareil. 2 Appuyez sur T SCENE 1. L’appareil se met sous tension. “DVD Viewing” apparaît sur l’afficheur de la face avant et l’appareil s’ajuste de manière optimale pour la lecture de DVD.
02FR_HTR-6150_UC.book Page 8 Friday, February 1, 2008 11:27 AM Guide de démarrage rapide ■ Lorsque vous n’utilisez plus cet appareil... Appuyez sur A MAIN ZONE ON/OFF sur la face avant pour mettre cet appareil en veille. Que voulez-vous faire avec cet appareil? ■ Personnalisation de modèles SCENE • Utilisation des divers modèles SCENE ☞ P. 30 • Création de vos propres modèles SCENE ☞ P. 33 ■ Utilisation de diverses sources d’entrée • Commandes de base de cet appareil ☞ P.
02FR_HTR-6150_UC.book Page 9 Friday, February 1, 2008 11:27 AM Raccordements Raccordements Panneau arrière 1 2 34 5 6 7 8 OPTICAL DVD DVD IN1 DTV/CBL IN2 DTV/CBL DVD CD 2 1 OUT HDMI REMOTE PRÉPARATIONS SPEAKERS COAXIAL 3 DIGITAL INPUT COMPONENT VIDEO PB PR Y XM PR PB SIRIUS DOCK ANTENNA DTV/CBL Y IN AM DVR SURROUND BACK/BI-AMP OUT GND R R SURROUND L L SINGLE +12V 15mA MAX. VIDEO VIDEO MONITOR OUT FM AC OUTLETS 75 UNBAL.
02FR_HTR-6150_UC.book Page 10 Friday, February 1, 2008 11:27 AM Raccordements Disposition des enceintes La disposition suivante des enceintes est celle que nous conseillons. Vous pouvez choisir cette disposition pour CINEMA DSP ou les sources audio multivoies.
02FR_HTR-6150_UC.book Page 11 Friday, February 1, 2008 11:27 AM Raccordements Raccordements des enceintes Assurez-vous que la voie gauche (L), la voie droite (R) et les pôles “+” (rouge) et “–” (noir) sont convenablement reliés. Si les câbles ne sont pas correctement raccordés, les signaux d’entrée ne pourront pas être reproduits avec exactitude. PRÉPARATIONS Attention • Avant de raccorder les enceintes, assurez-vous que la fiche d’alimentation secteur est débranchée de la prise secteur.
02FR_HTR-6150_UC.book Page 12 Friday, February 1, 2008 11:27 AM Raccordements ■ Avant de raccorder les enceintes aux bornes SPEAKERS Un câble d’enceinte comporte deux conducteurs isolés placés côte à côte. Un des conducteurs a une couleur ou un marquage (ruban, rainure, dentelure) qui le distingue de l’autre. Reliez le conducteur repéré (rainure, etc.) aux bornes “+” (rouges) de cet appareil et de l’enceinte. Reliez l’autre conducteur (non repéré) aux bornes “–” (noires).
02FR_HTR-6150_UC.book Page 13 Friday, February 1, 2008 11:27 AM Raccordements Information sur les prises et les fiches de câbles Utilisez un des types de prises audio et/ou de prises vidéo présentes sur vos appareils.
02FR_HTR-6150_UC.book Page 14 Friday, February 1, 2008 11:27 AM Raccordements Informations sur le HDMI™ ■ Compatibilité de cet appareil avec HDMI Types de signaux audio Formats des signaux audio Appareils HDMI compatibles PCM linéaire à 2 voies 2 voies, 32-192 kHz, 16/20/24 bits CD, DVD-Vidéo, DVD-Audio, etc. PCM linéaire multivoies 8 voies, 32-192 kHz, 16/20/24 bits DVD-Audio, etc. Train binaire Dolby Digital, DTS DVD-Vidéo, etc.
02FR_HTR-6150_UC.
02FR_HTR-6150_UC.book Page 16 Friday, February 1, 2008 11:27 AM Raccordements Raccordements d’appareils vidéo Raccordez votre téléviseur (ou projecteur) à la prise HDMI OUT, aux prises COMPONENT VIDEO MONITOR OUT, à la prise S VIDEO MONITOR OUT ou à la prise VIDEO MONITOR OUT de cet appareil. Remarques • Certains moniteurs vidéo raccordés à cet appareil via une liaison DVI ne sont pas capables de reconnaître les signaux audio/vidéo HDMI envoyés quand ils sont en mode veille.
02FR_HTR-6150_UC.book Page 17 Friday, February 1, 2008 11:27 AM Raccordements Raccordement d’autres appareils Assurez-vous que cet appareil et les autres appareils sont débranchés des prises secteur. Remarques • Lorsque “VIDEO CONV.” est réglé sur “OFF” (voir page 73), veillez à effectuer le même type de liaison vidéo que pour le raccordement du téléviseur (voir page 16).
02FR_HTR-6150_UC.book Page 18 Friday, February 1, 2008 11:27 AM Raccordements ■ Raccordement d’un lecteur de DVD, d’un magnétoscope numérique ou d’un magnétoscope analogique DVD DVD IN1 DTV/CBL IN2 DTV/CBL CD 2 1 OUT 3 DIGITAL INPUT COMPONENT VIDEO HDMI REMOTE DVD PR PB Y XM PR SIRIUS DTV/CBL Y PB IN DVR OUT +12V 15mA MAX.
02FR_HTR-6150_UC.book Page 19 Friday, February 1, 2008 11:27 AM Raccordements Raccordements des appareils audio Raccordez les appareils audio de la façon suivante. Assurez-vous que cet appareil et les autres appareils sont débranchés des prises secteur. ■ Raccordement d’un lecteur de CD et d’un enregistreur de CD ou de MD Remarque • Si vous raccordez votre lecteur de CD par les prises analogiques et numériques, le signal entrant par la prise DIGITAL INPUT sera prioritaire.
02FR_HTR-6150_UC.book Page 20 Friday, February 1, 2008 11:27 AM Raccordements Raccordement d’une station universelle Yamaha iPod™ ou d’un adaptateur Bluetooth™ Assurez-vous que cet appareil et les autres appareils sont débranchés des prises secteur.
02FR_HTR-6150_UC.book Page 21 Friday, February 1, 2008 11:27 AM Raccordements Utilisation des prises VIDEO AUX sur la face avant Reliez votre console de jeu ou votre caméscope aux prises VIDEO AUX sur la face avant de l’appareil. Attention Veillez à réduire complètement le volume de cet appareil et des autres appareils avant de les relier. Raccordement des antennes FM et AM Cet appareil est fourni avec une antenne FM et une antenne AM intérieures. Raccordez ces antennes aux prises prévues à cet effet.
02FR_HTR-6150_UC.book Page 22 Friday, February 1, 2008 11:27 AM Raccordements Raccordement du fil de l’antenne cadre AM Ouvrez le levier Insérez Fermez le levier Raccordement du câble d’alimentation Lorsque tous les raccordements sont terminés, branchez le câble d’alimentation sur une prise secteur. (Modèle pour les États-Unis) y Le fil de l’antenne cadre AM n’a pas de polarité et n’importe quelle extrémité peut être insérée dans la borne AM et GND.
02FR_HTR-6150_UC.book Page 23 Friday, February 1, 2008 11:27 AM Raccordements Réglage de l’impédance des enceintes Attention Si vous utilisez des enceintes de 6 ohms, réglez “SP IMP.” sur “6Ω MIN” AVANT d’utiliser cet appareil. 1 Appuyez un instant sur N TONE CONTROL puis appuyez sur A MAIN ZONE ON/OFF pour mettre cet appareil en service. L’appareil se met en service et le menu des réglages approfondis apparaît sur l’afficheur de la face avant.
02FR_HTR-6150_UC.book Page 24 Friday, February 1, 2008 11:27 AM Raccordements Afficheur de la face avant Remarque Les témoins XM et SIRIUS ne sont valides que pour les modèles commercialisés aux États-Unis et au Canada et le curseur à la gauche du témoin XM ou de du témoin SIRIUS ne s’allume que lorsque “XM” ou “SIRIUS” est sélectionné comme source d’entrée.
02FR_HTR-6150_UC.book Page 25 Friday, February 1, 2008 11:27 AM Raccordements D Témoin CINEMA DSP Ce témoin s’éclaire lorsque vous sélectionnez une correction de champ sonore (voir page 41). Témoin VIRTUAL Ce témoin s’éclaire lorsque la correction Virtual CINEMA DSP est active (voir page 41). ■ Utilisation du boîtier de télécommande Le boîtier de télécommande émet un rayon infrarouge. Veillez à le pointer directement sur le capteur de télécommande de l’appareil pour en assurer le fonctionnement.
02FR_HTR-6150_UC.book Page 26 Friday, February 1, 2008 11:27 AM Optimisation du réglage des enceintes pour votre salle d’écoute Optimisation du réglage des enceintes pour votre salle d’écoute Cet appareil est doté de la technologie YPAO (Yamaha Parametric Room Acoustic Optimizer) qui permet d’éviter les réglages fastidieux d’enceintes et garantit une grande précision lors des réglages automatiques.
02FR_HTR-6150_UC.book Page 27 Friday, February 1, 2008 11:27 AM Optimisation du réglage des enceintes pour votre salle d’écoute 4 Assurez-vous que “SETUP” a pour valeur “AUTO” et que le pointeur indique “START”. y Vous pouvez aussi sélectionner les méthodes de réglage suivantes. Dans ce cas, appuyez sur 8 k pour sélectionner “SETUP”, appuyez sur 8 l / h pour sélectionner un des choix suivants, puis sélectionnez “START”.
02FR_HTR-6150_UC.book Page 28 Friday, February 1, 2008 11:27 AM Optimisation du réglage des enceintes pour votre salle d’écoute La page suivante s’affiche. 7 Appuyez sur 8 k et 8 ENTER pour afficher les détails des réglages effectués. 8 Appuyez plusieurs fois de suite sur 8 l / h pour voir les différentes pages de résultats. AUTO SETUP SETUP;;;;;;;AUTO .
02FR_HTR-6150_UC.book Page 29 Friday, February 1, 2008 11:27 AM Optimisation du réglage des enceintes pour votre salle d’écoute 10 11 Utilisez 8 n, puis appuyez sur 8 l / h pour sélectionner “SET” ou “CANCEL”. Choix: SET, CANCEL • Sélectionnez “SET” pour valider les résultats de la procédure “AUTO SETUP”. • Sélectionnez “CANCEL” pour annuler les résultats de la procédure “AUTO SETUP”.
02FR_HTR-6150_UC.book Page 30 Friday, February 1, 2008 11:27 AM SÉLECTION DES MODÈLES DE SCENE Sélection des modèles de SCENE Pour répondre à diverses situations, 17 modèles de SCENE ont été programmés sur cet appareil. Les modèles de SCENE suivants ont été attribués en usine à chaque touche SCENE. 2 Appuyez sur R INPUT l / h (ou appuyez sur 5 AMP, puis appuyez sur 8l / h) pour sélectionner le modèle souhaité.
02FR_HTR-6150_UC.
02FR_HTR-6150_UC.book Page 32 Friday, February 1, 2008 11:27 AM Sélection des modèles de SCENE ■ Descriptions des modèles de SCENE programmés Les illustrations des touches SCENE dans le tableau suivant indique les touches SCENE spécifiées par défaut. Modèle de SCENE Source d’entrée Mode de lecture DVD Viewing DVD* STRAIGHT Sélectionnez le modèle de SCENE que vous voulez utiliser pour la lecture d’enregistrements ordinaires sur le lecteur de DVD.
02FR_HTR-6150_UC.book Page 33 Friday, February 1, 2008 11:27 AM Sélection des modèles de SCENE Création de vos propres modèles SCENE 3 Vous pouvez créer vos propres modèles de SCENE pour chaque touche SCENE. Pour ce faire, vous pouvez vous baser sur les 17 modèles de SCENE programmés.
02FR_HTR-6150_UC.book Page 34 Friday, February 1, 2008 11:27 AM Sélection des modèles de SCENE Utilisation du boîtier de télécommande pour la fonction SCENE ■ Commande des appareils sources en mode SCENE Vous pouvez agir à la fois sur cet appareil et sur l’appareil source avec le même boîtier de télécommande. Vous devez spécifier au préalable le code de commande approprié pour chaque source (voir page 78). 1 Appuyez sur la touche 6 SCENE souhaitée du boîtier de télécommande.
02FR_HTR-6150_UC.book Page 35 Friday, February 1, 2008 11:27 AM LECTURE Lecture Attention Il faut être très prudent lorsque vous écoutez des CD codés en DTS. Lorsque vous écoutez un CD codé en DTS sur un lecteur de CD incompatible avec DTS, vous entendez des parasites qui risquent d’abîmer les haut-parleurs. Vérifiez que votre lecteur de CD peut lire les CD codés en DTS. Vérifiez également le volume sonore de votre lecteur de CD avant d’écouter un CD codé en DTS.
02FR_HTR-6150_UC.book Page 36 Friday, February 1, 2008 11:27 AM Lecture Sélection des prises d’entrée audio (AUDIO SELECT) Sélection d’un appareil MULTI CH INPUT Cet appareil possède diverses prises d’entrée. Cette fonction (sélection des prises d’entrée audio) permet de changer de prises lorsqu’une même source est attribuée à plusieurs prises. Cette fonction permet de sélectionner comme source d’entrée l’appareil relié aux prises MULTI CH INPUT (voir page 19).
02FR_HTR-6150_UC.book Page 37 Friday, February 1, 2008 11:27 AM Lecture Indication de l’état actuel de cet appareil sur un moniteur vidéo Vous pouvez afficher les informations qui concernent le fonctionnement de cet appareil sur un moniteur vidéo. 1 Mettez en service le moniteur vidéo relié à l’appareil. 2 Appuyez sur O DISPLAY. L’état actuel est indiqué sur l’affichage OSD.
02FR_HTR-6150_UC.book Page 38 Friday, February 1, 2008 11:27 AM Lecture Lecture d’une source vidéo en toile de fond d’une source audio Vous pouvez associer une image provenant d’une source vidéo à des sons fournis par une source audio. Par exemple, vous pouvez écouter une pièce de musique classique tout en regardant l’image, sur le moniteur vidéo, d’un beau paysage, image qui est fournie par une source vidéo.
02FR_HTR-6150_UC.book Page 39 Friday, February 1, 2008 11:27 AM Lecture Utilisation de la minuterie de mise hors service Utilisez cette minuterie pour mettre la zone principale en veille après l’écoulement d’un certain temps. Appuyez sur 5 AMP et plusieurs fois de suite sur T SLEEP pour spécifier le temps. À chaque pression sur N SLEEP, les indications de l’afficheur de la face avant changent, comme il est indiqué ci-dessous.
02FR_HTR-6150_UC.book Page 40 Friday, February 1, 2008 11:27 AM CORRECTIONS DE CHAMP SONORE Corrections de champ sonore Cet appareil est doté de plusieurs décodeurs numériques de précision qui vous garantissent la reproduction multivoie de pratiquement toutes les sources (stéréo ou multivoies). Appuyez sur O PROGRAM l / h (ou appuyez sur 5 AMP puis plusieurs fois de suite sur B PROG l / h). Le nom de la correction de champ sonore sélectionnée apparaît sur l’afficheur de la face avant.
02FR_HTR-6150_UC.book Page 41 Friday, February 1, 2008 11:27 AM Corrections de champ sonore ■ Écoute de sources à 2 voies avec les décodeurs standard Les signaux provenant de sources à 2 voies peuvent aussi être restitués en multivoies. Appuyez plusieurs fois de suite sur 5 AMP, puis appuyez plusieurs fois de suite sur QSUR. DECODE pour sélectionner un décodeur. Vous avez le choix entre différents décodeurs selon le type de gravures et vos goûts personnels.
02FR_HTR-6150_UC.book Page 42 Friday, February 1, 2008 11:27 AM Corrections de champ sonore ■ Modification des paramètres des champs sonores y Vous pouvez profiter d’un son de bonne qualité en utilisant les paramètres définis en usine. Bien que vous n’ayez pas à changer les valeurs initiales, vous pouvez modifier certains des paramètres pour mieux tenir compte des caractéristiques de la source ou de la pièce d’écoute.
02FR_HTR-6150_UC.book Page 43 Friday, February 1, 2008 11:27 AM UTILISATION DES FONCTIONS AUDIO Utilisation des fonctions audio Écoute du son de haute qualité Utilisez le mode DIRECT pour bénéficier d’un son de haute qualité, quelle que soit la source sélectionnée. Lorsque le mode DIRECT est activé, le signal de la source sélectionnée transite par le circuit le plus direct. Appuyez sur QDIRECT (ou appuyez sur 5 AMP puis sur D DIRECT) pour sélectionner “DIRECT”.
02FR_HTR-6150_UC.book Page 44 Friday, February 1, 2008 11:27 AM Utilisation des fonctions audio Sélection du mode d’écoute tardive Les modes d’écoute tardive facilitent la perception des détails lorsqu’un bas niveau sonore est employé, par exemple tard dans la soirée. 1 Appuyez sur 5 AMP puis plusieurs fois de suite sur R NIGHT pour sélectionner “NIGHT:CINEMA” ou “NIGHT:MUSIC”.
02FR_HTR-6150_UC.book Page 45 Friday, February 1, 2008 11:27 AM SYNTONISATION FM/AM Syntonisation FM/AM Il existe 2 méthodes de syntonisation: syntonisation automatique et syntonisation manuelle. La syntonisation automatique est efficace lorsque les signaux captés sont puissants et qu’il n’existe aucun brouillage. Si le signal de la station que vous désirez écouter est peu puissant, effectuez une syntonisation manuelle.
02FR_HTR-6150_UC.book Page 46 Friday, February 1, 2008 11:27 AM Syntonisation FM/AM Mise en mémoire automatique des fréquences Vous pouvez aussi utiliser la syntonisation automatique pour mettre en mémoire jusqu’à 40 stations FM se caractérisant par un signal puissant (A1 à E8: soit 8 numéros de présélection fois 5 groupes). Vous pouvez rappeler n’importe quelle station présélectionnée facilement en sélectionnant le numéro de présélection.
02FR_HTR-6150_UC.book Page 47 Friday, February 1, 2008 11:27 AM Syntonisation FM/AM Sélection de stations présélectionnées Vous pouvez accorder n’importe quelle station simplement en sélectionnant le groupe et le numéro de présélection où elle a été préréglée. y Pour effectuer cette opération avec le boîtier de télécommande, appuyez sur 4 TUNER pour sélectionner “TUNER” comme source d’entrée. 1 Vous pouvez échanger le contenu de deux numéros de présélection.
02FR_HTR-6150_UC.book Page 48 Friday, February 1, 2008 11:27 AM ECOUTE D’ÉMISSIONS XM SATELLITE RADIO Ecoute d’émissions XM Satellite Radio XM Radio offre une extraordinaire variété de musique, des sports les plus populaires, de radio parlée, d’humour, de divertissements et d’émissions pour enfants sans pauses mublicitaires. Les émissions XM sont diffusées dans une qualité audionumérique exceptionnelle dans tout le pays.
02FR_HTR-6150_UC.book Page 49 Friday, February 1, 2008 11:27 AM Ecoute d’émissions XM Satellite Radio Activation XM Satellite Radio Après avoir installé le XM Mini-Tuner Dock, inséré le XM Mini-Tuner; raccordé le XM Mini-Tuner Dock à votre chaîne audio XM Ready®, et installé l’antenne, vous pouvez vous abonner et recevoir les émissions XM. Les huit caractères du numéro d’identification de XM Radio ID se trouvent à trois endroits: sur le XM Mini-Tuner, sur le carton du XM Mini-Tuner et sur la XM Channel 0.
02FR_HTR-6150_UC.book Page 50 Friday, February 1, 2008 11:27 AM Ecoute d’émissions XM Satellite Radio y Appuyez au préalable sur 3 XM pour sélectionner “XM” comme source d’entrée. 3 ■ Recherche sur tous les canaux 1 2 Appuyez plusieurs fois de suite sur D SEARCH MODE (ou sur M SRCH MODE) pour sélectionner “ALL CH SEARCH”. Appuyez plusieurs fois de suite sur G PRESET/TUNING/CH l / h (ou sur 8 PRESET/CH k / n) pour sélectionner le numéro de présélection (1 à 8).
02FR_HTR-6150_UC.book Page 51 Friday, February 1, 2008 11:27 AM Ecoute d’émissions XM Satellite Radio Réglage des canaux présélectionnés XM Satellite Radio 3 Cette fonction permet de mettre en mémoire jusqu’à 40 canaux XM Satellite Radio (A1 à E8: soit 8 numéros de présélection fois 5 groupes).
02FR_HTR-6150_UC.book Page 52 Friday, February 1, 2008 11:27 AM Ecoute d’émissions XM Satellite Radio Affichage des informations XM Satellite Radio Vous pouvez afficher des informations XM Satellite Radio (numéro du canal ou nom de la station, catégorie, nom de l’interprète ou titre de l’œuvre) relatives au canal sélectionné sur la face avant de cet appareil ou sur un écran.
02FR_HTR-6150_UC.book Page 53 Friday, February 1, 2008 11:27 AM SYNTONISATION D’ÉMISSIONS SIRIUS SATELLITE RADIO™ Syntonisation d’émissions SIRIUS Satellite Radio™ SIRIUS Satellite Radio propose plus de 130 canaux des meilleures variétés et 100% de musique sans publicités. Seul SIRIUS dispose de plus de 65 canaux de musique originale, des tubes actuels aux anciens R&B et aux meilleures oeuvres de la musique classique.
02FR_HTR-6150_UC.book Page 54 Friday, February 1, 2008 11:27 AM Syntonisation d’émissions SIRIUS Satellite Radio™ Activation de l’abonnement de SIRIUS Satellite Radio™ Pour pouvoir utiliser la radio satellite SIRIUS, vous devez activer votre abonnement à la Radio Satellite SIRIUS. Pour activer l’abonnement vous avez besoin du code Sirius ID qui identifie chaque syntoniseur SiriusConnect.
02FR_HTR-6150_UC.book Page 55 Friday, February 1, 2008 11:27 AM Syntonisation d’émissions SIRIUS Satellite Radio™ Avant d’effectuer les opérations suivantes, appuyez sur K SIRIUS. ■ Recherche sur tous les canaux 1 2 Appuyez plusieurs fois de suite sur D SEARCH MODE (ou sur M SRCH MODE) pour sélectionner “ALL CH SEARCH”. Appuyez plusieurs fois de suite sur G PRESET/TUNING/CH l / h (ou sur 8 PRESET/CH k / n) pour rechercher un canal parmi tous les canaux.
02FR_HTR-6150_UC.book Page 56 Friday, February 1, 2008 11:27 AM Syntonisation d’émissions SIRIUS Satellite Radio™ Avant d’effectuer les opérations suivantes, appuyez sur K SIRIUS. 4 Définition des présélections SIRIUS Satellite Radio™ Vous pouvez utiliser cette fonction pour sauvegarder jusqu’à 40 canaux SIRIUS Satellite Radio (A1 à E8: soit 8 numéros de présélection fois 5 groupes).
02FR_HTR-6150_UC.book Page 57 Friday, February 1, 2008 11:27 AM Syntonisation d’émissions SIRIUS Satellite Radio™ 3 Appuyez plusieurs fois de suite sur 8 n pour sélectionner “OPTION MENU”, puis appuyez sur 8 ENTER. 4 Appuyez plusieurs fois de suite sur 8 k / n pour sélectionner “G)SIRIUS SET”, puis appuyez sur 8 ENTER. Le menu suivant apparaît.
02FR_HTR-6150_UC.book Page 58 Friday, February 1, 2008 11:27 AM Syntonisation d’émissions SIRIUS Satellite Radio™ Avant d’effectuer les opérations suivantes, appuyez sur K SIRIUS. Affichage des informations SIRIUS Satellite Radio Vous pouvez afficher des informations SIRIUS Satellite Radio (numéro du canal, nom de la station, catégorie, nom de l’interprète, nom du compositeur ou titre de l’œuvre) relatives au canal sélectionné sur l’afficheur de la face avant de cet appareil ou sur l’écran.
02FR_HTR-6150_UC.book Page 59 Friday, February 1, 2008 11:27 AM UTILISATION DE IPOD™ Utilisation de iPod™ Lorsque vous posez votre iPod sur la station universelle Yamaha iPod (par exemple la YDS-10 vendue séparément) reliée à la borne DOCK de cet appareil (voir page 20), vous pouvez écouter la musique enregistrée sur votre iPod à l’aide du boîtier de télécommande fourni.
02FR_HTR-6150_UC.book Page 60 Friday, February 1, 2008 11:27 AM Utilisation de iPod™ ■ Commande du iPod par le mode de navigation Les fonctions avancées de votre iPod pourront être activées depuis le boîtier de télécommande fourni si vous raccordez cet appareil à un moniteur par les prises S VIDEO ou VIDEO. Vous pouvez aussi rechercher des morceaux enregistrés sur votre iPod en utilisant l’affichage OSD. Vous pouvez même changer les réglages de votre iPod en fonction de vos préférences.
02FR_HTR-6150_UC.book Page 61 Friday, February 1, 2008 11:27 AM UTILISATION D’APPAREILS BLUETOOTH™ Utilisation d’appareils Bluetooth™ Vous pouvez raccorder un adaptateur Bluetooth Yamaha (par exemple un YBA-10, vendu séparément) à la borne DOCK de cet appareil pour écouter les morceaux de musique enregistrés sur votre appareil Bluetooth (par exemple un lecteur de musique portable) sans avoir à raccorder de cordon entre cet appareil et votre appareil Bluetooth.
02FR_HTR-6150_UC.book Page 62 Friday, February 1, 2008 11:27 AM ENREGISTREMENT Enregistrement Les réglages d’enregistrement et autres opérations sont à réaliser au niveau de l’appareil d’enregistrement. Voir le mode d’emploi de l’appareil concerné. Remarques • Lorsque cet appareil est en veille, vous ne pouvez pas effectuer d’enregistrement en utilisant d’autres appareils qui lui sont reliés.
02FR_HTR-6150_UC.book Page 63 Friday, February 1, 2008 11:27 AM SET MENU SET MENU Utilisez les paramètres suivants de “SET MENU” pour régler divers éléments de la chaîne et personnaliser la manière de fonctionner de cet appareil. Modifiez le réglage initial (indiqué en caractères gras sous chaque paramètre) pour tenir compte des besoins de votre environnement d’écoute.
02FR_HTR-6150_UC.book Page 64 Friday, February 1, 2008 11:27 AM SET MENU Menu option 3 OPTION MENU Paramètres Description Page A)DISPLAY SET Réglage de la luminosité de l’afficheur de la face avant et de la façon dont les informations XM et iPod sont affichées. 73 B)MEMORY GUARD Verrouillage des paramètres de champ sonore et des autres réglages découlant de “SET MENU”.
02FR_HTR-6150_UC.book Page 65 Friday, February 1, 2008 11:27 AM SET MENU 1 SOUND MENU Utilisez ce menu pour régler manuellement les enceintes, ou compenser les retards dans le traitement des signaux vidéo liés à l’emploi d’un moniteur à cristaux liquides ou d’un projecteur.
02FR_HTR-6150_UC.book Page 66 Friday, February 1, 2008 11:27 AM SET MENU Enceintes d’ambiance gauche/droite SUR. L/R SP Choix: NONE, SML, LRG 1 SOUND MENU Sortie des graves LFE LFE/BASS OUT Utilisez cette option pour sélectionner les enceintes qui doivent fournir les signaux LFE (effet des fréquences graves) et les signaux des fréquences graves. Choix: SWFR, FRNT, BOTH A)SPEAKER SET SUR.
02FR_HTR-6150_UC.book Page 67 Friday, February 1, 2008 11:27 AM SET MENU Fréquence de recoupement CROSS OVER Cette option sert à sélectionner la fréquence de recoupement de toutes les enceintes définies par “SML” (ou “SMALL”) dans “SPEAKER SET” (voir page 65). Toutes les fréquences inférieures à la fréquence sélectionnée sont envoyées au caisson de graves ou aux enceintes selon le réglage de “LFE/BASS OUT” (voir page 65).
02FR_HTR-6150_UC.book Page 68 Friday, February 1, 2008 11:27 AM SET MENU ■ Distance des enceintes C)SP DISTANCE ■ Égaliseur de voie centrale D)CENTER GEQ Utilisez cette option pour préciser manuellement la distance à chaque enceinte et le retard qui doit être appliqué à la voie correspondante. Dans l’idéal, chaque enceinte devrait être à la même distance de la position d’écoute. Toutefois, cette situation est rarement possible dans les habitations.
02FR_HTR-6150_UC.book Page 69 Friday, February 1, 2008 11:27 AM SET MENU ■ Dynamique F)DYNAMIC RANGE Utilisez cette option pour définir la compression de dynamique à appliquer aux signaux destinés aux enceintes et au casque. Le réglage effectué n’est pris en compte que si l’appareil détecte des signaux Dolby Digital ou DTS. 1 SOUND MENU F)DYNAMIC RANGE . SPEAKER;;;;;;MAX HEADPHONE;;;;MAX Volume maximal MAX VOL. Utilisez cette fonction pour spécifier le volume maximal.
02FR_HTR-6150_UC.book Page 70 Friday, February 1, 2008 11:27 AM SET MENU ■ HDMI Réglage H)HDMI SET Utilisez cette fonction pour sélectionner l’appareil devant lire les signaux audio HDMI. ■ Ambiance complémentaire I)EXTD SUR. 1 SOUND MENU I)EXTD SUR. . >AUTO LAST EXTD SUR.;;;;;;AUTO 1 SOUND MENU H)HDMI SET [p]/[[]:Select [ENTER]:Return SUPPORT AUDIO: HTR-6150 [p]/[[]:Select [ENTER]:Return Support audio S.
02FR_HTR-6150_UC.book Page 71 Friday, February 1, 2008 11:27 AM SET MENU 2 INPUT MENU Utilisez ce menu pour réattribuer les prises d’entrée, sélectionner le mode de décodeur ou renommer une source. Pour les prises HDMI 1 et 2 HDMI IN [1] HDMI IN [2] Choix: (1) DVD, DTV/CBL, V-AUX, DVR (2) DVD, DTV/CBL, V-AUX, DVR ;MANUAL SETUP 2 INPUT MENU A)INPUT ASSIGNMENT HDMI IN . [IN1];;; DVD ( DVD ) [IN2];;;DTV/CBL (DTV/CBL ) 2 INPUT MENU p p .
02FR_HTR-6150_UC.book Page 72 Friday, February 1, 2008 11:27 AM SET MENU 4 Répétez les étapes 1 à 3 pour renommer chaque entrée. 5 Appuyez sur 8 ENTER pour quitter le mode “INPUT RENAME”. ■ Équilibrage du volume C)VOLUME TRIM Utilisez cette fonction pour préciser le volume de sortie de chaque source. Cela peut être utile pour équilibrer le niveau de chaque source afin d’éviter les brusques variations d’intensité sonore au moment du passage d’une source à une autre.
02FR_HTR-6150_UC.book Page 73 Friday, February 1, 2008 11:27 AM SET MENU 3 OPTION MENU Utilisez ce menu pour définir les valeurs des paramètres optionnels. ;MANUAL SETUP ;MANUAL SETUP 3 OPTION MENU 1/2 . A)DISPLAY SET B)MEMORY GUARD C)AUDIO SELECT D)PARAM. INI 3 OPTION MENU 2/2 E)BLUETOOTH SET .
02FR_HTR-6150_UC.book Page 74 Friday, February 1, 2008 11:27 AM SET MENU ■ Protection de la mémoire B)MEMORY GUARD Utilisez ce option pour empêcher que les valeurs des paramètres des corrections DSP et autres réglages ne soient accidentellement modifiées. Choix: OFF, ON ■ Valeurs initiales des paramètres D)PARAM. INI Utilisez cette fonction pour rétablir à leurs valeurs initiales (réglages usine) tous les paramètres des corrections de champ sonore de cet appareil.
02FR_HTR-6150_UC.book Page 75 Friday, February 1, 2008 11:27 AM SET MENU ■ Bluetooth réglage E)BLUETOOTH SET 3 OPTION MENU ■ XM Radio Réglage F)XM RADIO SET (Modèles pour les États-Unis et le Canada seulement) E)BLUETOOTH SET 3 OPTION MENU START PAIRING F)XM RADIO SET XM ANTENNA;;;95% [ENTER]:Enter Utilisez cette fonction pour procéder au jumelage de l’adaptateur Bluetooth Yamaha connecté (par exemple le YBA-10, vendu séparément) avec votre appareil Bluetooth.
02FR_HTR-6150_UC.book Page 76 Friday, February 1, 2008 11:27 AM Caractéristiques du boîtier de télécommande Caractéristiques du boîtier de télécommande Le boîtier de télécommande est conçu pour agir sur cet appareil et sur d’autres appareils audiovisuels fabriqués par Yamaha et d’autres sociétés. Pour agir sur un téléviseur ou d’autres appareils, le code de commande approprié doit être spécifié pour chaque appareil (voir page 78).
02FR_HTR-6150_UC.book Page 77 Friday, February 1, 2008 11:27 AM Caractéristiques du boîtier de télécommande ■ Commande des autres appareils Appuyez sur une des touches de sélection d’entrée (4) ou A à C pour agir sur d’autres appareils. Vous devez spécifier au préalable le code de commande approprié pour chaque source (voir page 78). Les fonctions de chaque touche de commande utilisée pour les appareils attribués à chaque touche de sélection d’entrée sont indiquées dans le tableau suivant.
02FR_HTR-6150_UC.book Page 78 Friday, February 1, 2008 11:27 AM Caractéristiques du boîtier de télécommande Enregistrement des codes de commande 1 Vous pouvez commander d’autres appareils en enregistrant les codes de commande qui conviennent. La liste des codes disponibles est fournie à la fin de ce mode d’emploi sous la rubrique “Liste des codes de commande”.
02FR_HTR-6150_UC.book Page 79 Friday, February 1, 2008 11:27 AM Utilisation d’une configuration multi-zones Utilisation d’une configuration multi-zones Cet appareil est conçu pour un usage couvrant plusieurs pièces. La fonction Zone 2 permet de régler cet appareil pour qu’une source puisse être utilisée pour une pièce principale de l’habitation et une autre source pour une autre pièce (Zone 2).
02FR_HTR-6150_UC.book Page 80 Friday, February 1, 2008 11:27 AM Utilisation d’une configuration multi-zones Commande du Zone 2 Vous pouvez sélectionner l’appareil de la Zone 2 que vous voulez commander à l’aide des touches de commande sur la face avant ou sur le boîtier de télécommande. Les opérations accessibles sont les suivantes: • Sélection de la source d’entrée de Zone 2. • Syntonisation FM ou AM lorsque “TUNER” est sélectionné comme la source d’entrée de Zone 2 (voir page 45).
02FR_HTR-6150_UC.book Page 81 Friday, February 1, 2008 11:27 AM Utilisation d’une configuration multi-zones Effectuez les opérations suivantes après avoir activé le mode de fonctionnement de la Zone 2. Fonctionnement de la Zone 2 Appuyez sur RINPUT l / h pour sélectionner la source souhaitée pendant que le témoin ZONE2 clignote sur l’afficheur de la face avant. Mise en service de la Zone 2 Tout en maintenant 5 AMP enfoncée, appuyez sur H POWER.
02FR_HTR-6150_UC.book Page 82 Friday, February 1, 2008 11:27 AM Réglages approfondis Réglages approfondis Cet appareil propose d’autres menus qu’il affiche, le moment venu, sur la face avant. Le menu de réglages approfondis offre le moyen de régler et de personnaliser le fonctionnement de cet appareil. Modifiez le réglage initial (indiqué en caractères gras sous chaque paramètre) pour tenir compte des besoins de votre environnement d’écoute.
02FR_HTR-6150_UC.book Page 83 Friday, February 1, 2008 11:27 AM Réglages approfondis ■ SCENE Spécification du code IR SCENE IR Utilisez cette fonction pour transmettre automatiquement des signaux de commande à la prise REMOTE OUT lorsque cet appareil est en mode SCENE. Choix: ON, OFF • Sélectionnez “ON” si l’appareil raccordé à la prise REMOTE OUT est un appareil Yamaha et peut recevoir les signaux de commande SCENE. Cet appareil envoie automatiquement des signaux de commande à l’appareil.
02FR_HTR-6150_UC.book Page 84 Friday, February 1, 2008 11:27 AM Guide de dépannage Guide de dépannage Reportez-vous au tableau suivant si l’appareil ne fonctionne pas convenablement. Si l’anomalie constatée n’est pas mentionnée, ou encore si les actions correctives suggérées sont sans effet, mettez l’appareil hors service, débranchez la fiche du câble d’alimentation et prenez contact avec le revendeur ou le service après-vente de Yamaha.
02FR_HTR-6150_UC.book Page 85 Friday, February 1, 2008 11:27 AM Guide de dépannage Voir page Le circuit de protection a été actionné du fait de la présence d’un court-circuit, etc. Assurez-vous que le réglage d’impédance est correct. 23 Assurez-vous que les câbles d’enceintes ne sont en contact entre eux puis mettez à nouveau cet appareil en service. — La minuterie a mis l’appareil hors service. Mettez l’appareil en service et reprenez la lecture. — Le silencieux fonctionne.
02FR_HTR-6150_UC.book Page 86 Friday, February 1, 2008 11:27 AM Guide de dépannage Anomalies Causes possibles Actions correctives Voir page La lecture des sources au format Dolby Digital ou DTS n’est pas possible. (Le témoin Dolby Digital ou DTS de l’afficheur de la face avant ne s’éclaire pas.) L’appareil relié n’est pas réglé pour fournir en sortie des signaux numériques au format Dolby Digital ou DTS. Effectuez le réglage qui convient après avoir consulté le mode d’emploi de l’appareil concerné.
02FR_HTR-6150_UC.book Page 87 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ Syntoniseur Anomalies La réception FM en stéréophonie est parasitée. FM AM Causes possibles Actions correctives Voir page Les caractéristiques des émissions FM stéréophoniques sont à l’origine de cette anomalie si l’émetteur est trop éloigné, ou encore si le niveau d’entrée sur l’antenne est médiocre. Vérifiez les raccordements de l’antenne. 21 Tentez d’utiliser une antenne FM directionnelle de bonne qualité.
02FR_HTR-6150_UC.book Page 88 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ XM Satellite Radio Si une opération prend plus longtemps que prévu ou si une erreur survient, un des messages suivants peut s’afficher sur l’afficheur de la face avant. En ce cas, prenez les mesures correctives conseillées. Message d’état Causes possibles Actions correctives Voir page CHECK XM TUNER Le XM Mini-Tuner n’est pas posé sur le XM Mini-Tuner Dock ou le XM MiniTuner Dock n’est pas raccordé à cet appareil.
02FR_HTR-6150_UC.book Page 89 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ SIRIUS Satellite Radio Si une opération prend plus longtemps que prévu ou si une erreur survient, un des messages suivants peut s’afficher sur l’afficheur de la face avant. En ce cas, prenez les mesures correctives conseillées. Message d’état Causes possibles Actions correctives Voir page ANTENNA ERROR L’antenne n’est pas raccordée correctement au syntoniseur SiriusConnect.
02FR_HTR-6150_UC.book Page 90 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ AUTO SETUP Avant l’exécution de AUTO SETUP Message d’erreur Connect MIC! Unplug HP! Actions correctives Voir page Le microphone d’optimisation n’est pas branché. Branchez le microphone d’optimisation fourni sur la prise OPTIMIZER MIC située sur la face avant. 26 Le casque est branché. Débranchez le casque.
02FR_HTR-6150_UC.book Page 91 Friday, February 1, 2008 11:27 AM Guide de dépannage Après l’exécution de AUTO SETUP Message d’avertissement Causes possibles Actions correctives Voir page W-1:OUT OF PHASE La polarité de l’enceinte est incorrecte. Ce message peut apparaître, quand bien même les enceintes sont correctement raccordées. Contrôlez la polarité de la connexion à chaque enceinte (+ ou –).
02FR_HTR-6150_UC.book Page 92 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ Bluetooth Message d’état Searching... Causes possibles Actions correctives Voir page L’adaptateur Bluetooth et l’appareil Bluetooth sont en train d’être jumelés. L’adaptateur Bluetooth et l’appareil Bluetooth sont en train d’établir une connexion. Completed Le jumelage est terminé. Canceled Le jumelage est annulé.
02FR_HTR-6150_UC.book Page 93 Friday, February 1, 2008 11:27 AM Guide de dépannage ■ Boîtier de télécommande Anomalies Le boîtier de télécommande ne fonctionne pas ou n’agit pas convenablement. Causes possibles Actions correctives Voir page La portée et l’angle sont incorrects. Le boîtier de télécommande agit à une distance inférieure à 6 m et sous un angle inférieur à 30 degrés par rapport à une perpendiculaire à la face avant.
02FR_HTR-6150_UC.book Page 94 Friday, February 1, 2008 11:27 AM Glossaire Glossaire ■ Raccordement bi-amplification ■ Dolby Digital Le raccordement bi-amplification permet d’utiliser pour une seule enceinte deux amplificateurs. Un amplificateur est raccordé à la partie haut-parleur de graves et l’autre est relié à la section combinée haut-parleur médial et hautparleur d’aigus. Cette organisation permet à chaque amplificateur de fonctionner sur une plage de fréquences limitée.
02FR_HTR-6150_UC.book Page 95 Friday, February 1, 2008 11:27 AM Glossaire ■ Dolby Surround ■ Voie LFE 0.1 Dolby Surround fait usage d’un système analogique d’enregistrement à 4 voies pour reproduire des effets sonores réalistes et dynamiques: 2 voies avant gauche et droite (stéréophonie), une voie centrale pour les dialogues (monophonie) et une voie arrière (monophonie) pour les effets sonores. La voie d’ambiance reproduit seulement une plage de fréquences étroite du son.
02FR_HTR-6150_UC.book Page 96 Friday, February 1, 2008 11:27 AM Glossaire ■ SILENT CINEMA Yamaha a mis au point, pour le casque, un champ sonore DSP naturel et réaliste. Les valeurs des paramètres ont été calculées précisément pour que chaque correction sonore soit restituée par le casque comme elle l’est par les enceintes.
02FR_HTR-6150_UC.book Page 97 Friday, February 1, 2008 11:27 AM Caractéristiques techniques Caractéristiques techniques SECTION AUDIO • Puissance minimum efficace de sortie pour les voies avant, centrale, ambiance, ambiance arrière [Modèles pour les États-Unis et le Canada] 1 kHz, DHT 0,9%, 8 Ω ....................................................... 90 W [Autres modèles] 1 kHz, DHT 0,9%, 6 Ω ......................................................
02FR_HTR-6150_UC.book Page 98 Friday, February 1, 2008 11:27 AM INDEX Index ■ Symbols - - -, Message d’état de syntonisation XM ............................ 88 ■ Numerics 1 SOUND MENU, Réglage manuel .... 63 2 INPUT MENU, Réglage manuel ...... 63 2ch Stereo, Correction de champ sonore .............................................. 40 3 OPTION MENU ............................... 73 3 OPTION MENU, Réglage manuel ... 64 7ch Stereo, Correction de champ sonore .......................................
02FR_HTR-6150_UC.book Page 99 Friday, February 1, 2008 11:27 AM Index Échange, Station présélectionnée, Syntonisation FM/AM ..................... 47 Ecoute d’émissions XM Satellite Radio ................................................ 48 Égaliseur de voie centrale, Menu son .. 68 Émetteur infrarouge, Boîtier de télécommande .................................. 25 Enceinte centrale, Réglage des enceintes ...................... 65 Enceinte, Dynamique ...........................
02FR_HTR-6150_UC.book Page 100 Friday, February 1, 2008 11:27 AM Index Prises audio .......................................... 13 Prises COAXIAL INPUT .................... 71 Prises COMPONENT VIDEO ............. 13 Prises DIGITAL AUDIO COAXIAL .. 13 Prises DIGITAL AUDIO OPTICAL ... 13 Prises MULTI CH INPUT ................... 19 Prises REMOTE IN/OUT .................... 20 Prises S VIDEO ................................... 13 Prises VIDEO ...................................... 13 Prises vidéo ............
02FR_HTR-6150_UC.book Page 101 Friday, February 1, 2008 11:27 AM Index Unplug HP!, Message d’erreur de réglage auto .................................................. 90 UPDATING, Message d’état de syntonisation SIRIUS Satellite Radio ................................................ 89 UPDATING, Message d’état de syntonisation XM ............................ 88 Utilisation de iPod ............................... 59 ■ V Valeurs initiales des paramètres, Menu option ......................................
03_code_HTR-6150_UC.
03_code_HTR-6150_UC.fm Page ii Friday, February 1, 2008 11:33 AM ■ Remote control/Boîtier de télécommande 1 2 3 4 POWER POWER TV AV A STANDBY POWER XM SIRIUS MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR V-AUX/DOCK B C AMP TV INPUT TV MUTE H I J K TV CH L TV VOL 5 SCENE 6 7 1 2 9 4 SRCH MODE VOLUME MENU BAND LEVEL TITLE 8 3 N ENTER DISPLAY RETURN MEMORY M O REC 0 A l PROG h ENHANCER SUR.
03_code_HTR-6150_UC.
03_code_HTR-6150_UC.
03_code_HTR-6150_UC.
03_code_HTR-6150_UC.
HTR-6150_UC-cv.
00_sheet_HTR-6150_UC.book Page 1 Friday, February 1, 2008 11:39 AM UC HTR-6150 The circled numbers and alphabets correspond to those in the Owner’s Manual. Les nombres et lettres dans un cercle correspondent à ceux du mode d’emploi.
00_sheet_HTR-6150_UC.book Page i Friday, February 1, 2008 11:39 AM ■ Remote control/Boîtier de télécommande 1 2 3 4 POWER POWER TV AV A STANDBY POWER XM SIRIUS MUTE CD MD/CD-R TUNER DVD DTV/CBL DVR V-AUX/DOCK B C AMP TV INPUT TV MUTE 1 2 H I J K TV CH L TV VOL 5 SCENE 6 7 9 4 SRCH MODE VOLUME MENU BAND LEVEL TITLE 8 3 N ENTER DISPLAY RETURN MEMORY M O REC 0 A B C D E F G INFO l PROG h ENHANCER SUR.