Owner's Manual

21 En
Playback
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
2 Press ol / h to adjust the effect level while
“NIGHT:CINEMA” or “NIGHT:MUSIC” is
displayed on the front panel display.
Each choice is defined as follows.
y
• “NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are stored
independently.
Notes
• You cannot use the night listening modes in the following cases:
– when the component connected to the MULTI CH INPUT jacks is
selected as the input source.
– when headphones are connected to the PHONES jack.
– when the sampling frequency of the input sources are higher than 48
kHz.
• The effect of night listening modes may vary depending on the input
source and surround sound settings you use.
■ Displaying the input source information
(SIGNAL INFO)
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
1 Press kMENU on the remote control.
“AUTO SETUP” appears on the front panel display.
2 Press ok / n repeatedly to select “SIGNAL
INFO” and then press oENTER.
3 Press ok / n to switch the displayed
information.
The following information about the input source
appears on the front panel display.
4 Press kMENU on the remote control again
to exit from “SET MENU.”
■ Using the sleep timer
Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording from a source.
Press lSLEEP repeatedly to set the amount of
time.
The sleep timer setting changes as follows.
Once the sleep timer is set, the SLEEP indicator lights up
on the front panel display, and the display returns to the
selected sound field program.
To cancel the sleep timer
Press lSLEEP on the remote control repeatedly to
select “SLEEP OFF.”
y
• If you set the main zone to the standby mode, the sleep timer is
automatically canceled.
■ Playing video sources in the background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons (e) on the
remote control to select a video source and then
an audio source.
Choice Function
MIN Slightly lowers the effect level.
MID* Moderately lowers the effect level.
MAX Considerably lowers the effect level.
Choice Description
FORMAT Signal format.
SAMPLING The number of samples per second
taken from a continuous signal to
make discrete signals.
CHANNEL The number of source channels in the
input signal (front/surround/LFE).
BITRATE The number of bits passing a given
point per second.
FLAG Flag data encoded in DTS, Dolby
Digital, or PCM signals that cue this
unit to automatically switch decoders.
;AUTO SETUP
SLEEP 120min SLEEP 90min
SLEEP 60minSLEEP 30minSLEEP OFF
DVD DVR V-AUX
MULTI CH IN TUNER MD/CD-RCD
DTV/CBL
Audio sources
Video sources