Service manual

RX-V365/HTR-6230

Lighting in lattice

NormalShort

Checking FL display section

Initial display

All segments OFF

All segments ON (dimmer 100%)

All segments ON (dimmer 50%)

Lighting of segments in lattice

6. FL CHECK

This menu is used to check the FL display section.

The audio signal is processed using STRAIGHT.

Segment conditions of the FL driver and the FL tube are checked by turning ON and OFF all segments.

Next, the operation of the FL driver is checked by using the dimmer control. Then a short between segments next to

each other is checked by turning ON and OFF all segments alternately (in lattice).

(In the above example, the segments in the second row from the top are shorted.)