Owner's Manual
Table Of Contents
- HTR-6260 Owner's Manual
- English
- INTRODUCTION
- PREPARATION
- Preparing remote control
- Connections
- Placing speakers
- Connecting speakers
- Information on jacks and cable plugs
- Connecting a TV monitor or projector
- Connecting other components
- Connecting an external amplifier
- Using REMOTE IN/OUT jacks
- Connecting a Yamaha iPod universal dock or Bluetooth™ wireless audio receiver
- Using the VIDEO AUX jacks on the front panel
- Connecting the FM and AM antennas
- Connecting the power cable
- Turning this unit on and off
- Optimizing the speaker setting for your listening room (YPAO)
- BASIC OPERATION
- ADVANCED OPERATION
- APPENDIX
- List of remote control codes
- English
- HTR-6260 Controls Diagram
37 En
SIRIUS Satellite Radio™ tuning (U.S.A. model only)
English
INTRODUCTION
ADDITIONAL
INFORMATION APPENDIX
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
You can use this feature to store up to 40 SIRIUS Satellite
Radio channels. You can then recall any preset channel
easily by selecting the preset channel group and number as
described in “Calling a preset channel (Preset Search
mode)” on this page.
1 Search a channel you want to set as a preset
channel in one of the SIRIUS Satellite Radio
search modes.
For details, see “SIRIUS Satellite Radio operations”
(see page 35).
2 Press FMEMORY (or iMEMORY).
The indicator on the front panel display changes as
follows.
y
• To store the selected channel under an empty preset number
automatically, press and hold FMEMORY (or iMEMORY)
for more than 2 seconds instead of step 2. In this case, the
following steps are unnecessary.
• To cancel the preset operation, press oRETURN.
3 Press GPRESET l / h (or iPRESET k / n)
to select the stored preset station number.
Notes
• You can also select a preset number by pressing the tNumeric
keys.
• If you select a preset number being used (“*” appears next to the
preset number), the current preset channel will be overwritten.
4 Press FMEMORY (or iMEMORY).
The selected channel is stored as a preset channel.
Prior to selecting a preset channel in the Preset Search
mode, you must preset SIRIUS channels. For details, see
“Registering preset channels” on this page.
Press GPRESET l / h (or iPRESET k / n)
repeatedly to change the preset channel number
(1 to 40).
You can clear the assignments of preset SIRIUS Satellite
Radio channels.
1 Press nOPTION on the remote control.
The option menu is displayed on the front panel
display.
2 Press oCursor n repeatedly to select “Clear
Preset” and then press oENTER.
3 Press oCursor k / n to select the preset
station number that you want to clear.
4 Press oENTER to execute the clearing of
the selected preset channel.
To clear the registration of multiple preset numbers,
repeat the above steps. To end the operation, press
nOPTION.
Registering the SIRIUS Satellite
Radio™ channels
Registering preset channels
001Hits1
SIRIUS
P01:---<<001
SIRIUS
Currently registered channel number
(or “---” if empty)
Channel number to be
registered
Preset number to which new
channel number is registered
Calling a preset channel (Preset Search
mode)
Clearing preset channels
001Hits1
SIRIUS
001 Hits 1
SIRIUS