Owner's Manual
Table Of Contents
- HTR-6260 Owner's Manual
- English
- INTRODUCTION
- PREPARATION
- Preparing remote control
- Connections
- Placing speakers
- Connecting speakers
- Information on jacks and cable plugs
- Connecting a TV monitor or projector
- Connecting other components
- Connecting an external amplifier
- Using REMOTE IN/OUT jacks
- Connecting a Yamaha iPod universal dock or Bluetooth™ wireless audio receiver
- Using the VIDEO AUX jacks on the front panel
- Connecting the FM and AM antennas
- Connecting the power cable
- Turning this unit on and off
- Optimizing the speaker setting for your listening room (YPAO)
- BASIC OPERATION
- ADVANCED OPERATION
- APPENDIX
- List of remote control codes
- English
- HTR-6260 Controls Diagram
56 En
Operating various settings for this unit (Setup menu)
Sets the maximum volume level and initial volume level
of Zone2.
y
• This item is displayed only when “Extra SP Assign” is set to “Zone2.”
■ Max Volume
Sets the maximum volume level of Zone2, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB.”
■ Init. Volume
Use this feature to set the volume level of Zone2 when the
power of Zone2 unit is turned on.
Note
• If the setting of “Max Volume” is lower than the setting of “Init.
Volume,” the setting of “Max Volume” becomes effective. For example,
when you set “Max Volume” to “–30.0dB” and “Init. Volume” to
“0.0dB,” the volume is automatically set to “–30.0dB” at the next time
this unit is turned on.
You can set parameters for the sound field programs. For
details, see page 46.
Protects settings of setup menu against accidental
alteration.
Note
• When this parameter is switched to “On,” “G” appears while the setup
menu is displayed on the video monitor.
5 Zone2
Adjustable range: -30.0dB to +15.0dB / +16.5dB*
(5.0 dB step)
Choices: Off*/Mute/-80.0dB to +16.5dB (0.5 dB step)
DSP Parameter
Memory Guard
Choices: Off*/On
Off Not protect settings.
On Protects the settings of the setup menu
(except for the Memory Guard setting).