Owner's Manual
Table Of Contents
- HTR-6260 Owner's Manual
- English
- INTRODUCTION
- PREPARATION
- Preparing remote control
- Connections
- Placing speakers
- Connecting speakers
- Information on jacks and cable plugs
- Connecting a TV monitor or projector
- Connecting other components
- Connecting an external amplifier
- Using REMOTE IN/OUT jacks
- Connecting a Yamaha iPod universal dock or Bluetooth™ wireless audio receiver
- Using the VIDEO AUX jacks on the front panel
- Connecting the FM and AM antennas
- Connecting the power cable
- Turning this unit on and off
- Optimizing the speaker setting for your listening room (YPAO)
- BASIC OPERATION
- ADVANCED OPERATION
- APPENDIX
- List of remote control codes
- English
- HTR-6260 Controls Diagram
68 En
Troubleshooting
Note
• In case of a transmission error without a status message appearing on the front panel display and on the OSD, check the connection of your iPod (see
page 17).
iPod™
Problem Cause Remedy
See
page
Loading... This unit is in the middle of recognizing
the connection with your iPod.
This unit is in the middle of acquiring
song lists from your iPod.
Connect error There is a problem with the signal path
from your iPod to this unit.
Turn off this unit and reconnect the Yamaha iPod
universal dock to the DOCK terminal of this unit.
17
Remove your iPod in the Yamaha iPod universal dock
and then place it back in the dock.
17
Unknown iPod The iPod being used is not supported by
this unit.
This unit supports iPod Touch, iPod (Click and
Wheel), iPod nano and iPod mini.
—
iPod Connected Your iPod is properly placed in the
Yamaha iPod universal dock.
Disconnected Your iPod is removed from the Yamaha
iPod universal dock.
Place your iPod in the Yamaha iPod universal dock. 17
Unable to play This unit cannot play back the songs
currently stored on your iPod.
Check that the songs currently stored on your iPod
are playable.
—
Store some other playable music files on your iPod. —
Bluetooth™
Problem Cause Remedy
See
page
Searching... The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of the pairing.
The Bluetooth wireless audio receiver and
the Bluetooth component are in the
middle of establishing the connection.
Completed The pairing is completed.
Canceled The pairing is canceled.
BT Connected The connection between the Yamaha
Bluetooth wireless audio receiver and the
Bluetooth component is established.
Disconnected The Bluetooth component is disconnected
from the Yamaha Bluetooth wireless
audio receiver.