User Manual

Application Guide for

Yamaha Installation Series Speakers

Fig. C: Simplified configuration in DME.

When using Installation Series Speakers in passive mode or using Subwoofers, “Speaker Processor

1Way” is recommended. Fig. D. shows the example of two Mid-High and 1 subwoofer system. It

has input level, Crossover (HPF and LPF), Delay (up to 500ms), 6 band PEQ, limiter and output

level. (DME has up to 6Way Speaker Processor components)

IF2115 biamp

IS1118

Fig. D: DME configuration example of two Mid-High and 1 subwoofer system.

In the case of the balcony speakers, stage front speakers or simple symmetrical dispersion speakers,

Multi output delay will be useful because signal for each speakers is same and only delay and level

is changed and also the parameters of left side and right side is symmetrical. It is easy to set the

parameters using snapshot copy & paste.

Fig. E: Example of using multi-output delay