User Manual

6 MY8-SDI-ED Owner’s Manual

■ Panel

INPUT Connector

This is a BNC connector that inputs HD/SD-SDI signals. To use the card on a

host device, you must always input SDI signals to the INPUT connector.

2 THRU Connector

This is a BNC connector that outputs re-clocked HD/SD-SDI signals.

3 OUT1, OUT2 Connectors

These are BNC connectors that output HD/SD-SDI signals. The same signals will

be routed to both the OUT1 and OUT2 connectors.

Note:

We recommend that you use a 5C-FB coaxial cable, or a coaxial cable that features excellent

performance equivalent to that of the 5C-FB cable. The 5C-FB cable transmits HD-SDI

signals over a distance of up to 130 meters, and SD-SDI signals up to 150 meters.

4 SDI STATUS LEDs

[IN] LED: Indicates the status of SDI inputs.

[A1-4] LED: Indicates the status of input ports 1 through 4.

[A5-8] LED: Indicates the status of input ports 5 through 8.

[OUT] LED: Indicates the status of SDI outputs.

Part Names and Functions