Owner's Manual

10 En

Preparations

Installation

1 Attach the non-skid pad to the bottom

of the unit (2 places).

• Attach the provided cable clamp to the bottom,

you can also put together cables clean.

2 Attach the provided stand.

3 Attach the cover.

• When using an outdoor antenna or connecting to

the AUX jack, the cover may not be able to be

attached. In that case, you can use the unit

without the cover.

4 Install FM antenna with pins where the

unit can obtain good reception.

5 Connecting the power cable to the AC

adapter.

When installing on a shelf

• Spread a soft cloth or other protective mat over the table before installation.