User Manual

19 En
TROUBLESHOOTING
English
CD playback
Problem Cause Solution
Disc cannot be inserted.
The system is set to power save mode.
Press to cancel the power save mode (☞ P. 2).
Some button operations do not work.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 21).
Playback does not start immediately after
pressing / .
The disc may be dirty. Wipe the disc clean.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 21).
If the unit was moved from a cold to warm place,
condensation may have formed on the disc reading
lens.
Wait for an hour or two until the unit adjusts to the
room temperature, and try again.
The CD indicator flashes twice, and
repeated 3 times, and the disc is ejected.
The disc loaded into the unit may not be
compatible.
Use a disc supported by the unit (☞ P. 21).
The disc may be dirty. Wipe the disc clean.
The disc does not contain playable files. Use a disc contains playable files (☞ P. 21, 22).
The disc is loaded back to front. Insert a disc facing the label side to near side.
“Err” is displayed in the front panel
display after loading a disc.
An error occurs in the unit.
Eject the disc with .
USB device playback
Problem Cause Solution
MP3/WMA file on the USB device does
not play.
The USB device is not recognized. Turn off the system and reconnect the USB device
to the unit.
Connect an AC adapter if supplied with the device.
If the solutions above do not resolve the problem,
the USB device is not playable on the unit.
The USB indicator flashes twice, and
repeated 3 times, after connecting a USB
device.
An incompatible USB device is connected to the
unit.
Turn off the system and reconnect the USB device
to the unit. If it does not resolve the problem, the
USB device is not playable on the unit.
The USB device does not contain playable files. Use a USB device contains playable files
(☞ P. 21, 22).
“Err” is displayed in the front panel
display after connecting a USB device.
An incompatible USB device is connected to the
unit.
Turn off the system and reconnect the USB device
to the unit. If it does not resolve the problem, the
USB device is not playable on the unit.
An overcurrent is detected.