User Manual

Preparations

Turning on the power

Plug the power cable into the wall outlet

and press

A (power)/CONNECT.

• The unit turns on.

• Press

A (power)/CONNECT again to turn off (standby

mode).

The unit can be set to display the clock or the network connection status when it is in standby (network

standby).

If network standby is turned off, the unit can reduce power consumption without displaying the clock

(eco standby). For details, see the table on the right.

Network standby can be turned on /off in the following procedure.

1 While pressing ALARM of the unit, plug the power cable into an outlet.

2 Press and hold ALARM.

• The front panel display shows “ON” or “OFF.”

A (power)/CONNECT

Network standby

Status in network standby/eco standby

• When you turn on the unit for the first time after

purchase, the Wi-Fi indicator blinks and the unit

automatically starts to search iOS device ( P.14).

• When the unit is turned on, a Source indicator

( P.7) lights up.

Network

standby

Eco

standby

Enable/disable the alarm Yes No

Control from the app Yes No

Clock display Yes No

Network connection Yes No

Bluetooth connection Yes No

• When the auto standby is on (default setting), the

unit will automatically go into the standby state

under the following conditions.

- When the unit produces no sound of audio

input and is not operated for about 20 minutes

at selecting Bluetooth or NET as the source.

- When the unit has passed for 8 hours in the FM/

DAB reception.