User Manual

•
Control Parameter (Red outline): Audio component parameter
This shows the name of the port used to input the control signal from an external source (Input
Port Name), the name of the port that outputs the change notification (Output Port Name), and
the range of the parameter that will be controlled (Parameter range).
•
Input Value (Blue outline):
Recommended data type and range for the input value used to control the target parameter.
•
Output Value (Green outline):
Data type and range for the output value that is output to the target parameter when it is
controlled.
(Table 1)
When controlling the Level using the Fader, by inputting either a dB value (–∞ to 10.00) of the same
data type as the Level parameter you want to control, or inputting a normalized value (0.00 to 1.00),
the Fader Level can be controlled in the range of –∞ to 10.00. (Fig. 1)
Conversely, by changing the Level of the Fader, a dB value (–∞ to 10.00) is output. (Fig. 2)
Icon
Audio component parameters that have this icon can be controlled using the Control layer by putting a
check in Control PINs.
Icon
Control component parameters that have this icon can be registered to a Parameter Set, GPI, DCP, or
Remote Control Setup List.
2. Audio Components
6 | ProVisionaire Design Component Guide