User Manual
Table Of Contents
- Cover
- Contents
- Differences Between the DTX-PRO and the DTX-PROX
- Links from the Owner’s Manuals
- How the Triggers Generate Sounds
- The Relationship Between Trigger Input Jacks, Trigger Inputs, and Trigger Input Sources
- Trigger Input Jack Input Mode
- Sounds that are played by trigger (Inst and Voice)
- Voices and Layers
- User Voices
- Importing to User Voices
- Changing the way a user voice is played (one-shot or Loop)
- Editing and auditioning user voices
- Selecting the Trigger Input or Trigger Input Source
- Effect Processor Design
- PRO Series Modules Internal Memory
- MENU Button
- KIT Mode
- CLICK Mode
- RECORDER Mode
- Practicing with the Training Feature
- Fader Select FX
- Fader Select CUSTM
- LIVE SET Mode
- Settings for live performances
- Connecting a Computer
- Troubleshooting
- Reference
Practicing with the Training Feature
109
DTX-PRO DTX-PROX Reference Manual
7. DYNAMIC GATE
Dynamic Gate is an exercise for playing pads with proper dynamics. Your aim is to control three levels: Weak, Normal and Strong. When
you strike with the wrong dynamics, it will not produce any sound. How accurately you strike with the proper dynamics is evaluated at the
end of the exercise. Once you master Dynamic Gate, you will be a skillful drummer at controlling dynamics depending on the situation.
What you can do during training:
To set the pad sounds to be muted for specific dynamics
For example, you can set the pad sound to be produced only when the pad is struck within the NORM range. In such case, disable
WEAK and STRONG.
Use the buttons below “ ” and “ ” ([F2] and [F3]) to move the cursor ( ), then use the [–] [+] control-
lers to select a square to show (with sounds) or not to show (without sounds).
You can also change the cursor position by striking the pad.
Pad names
HI-HAT
SNARE
KICK
TOM
RIDE
CRASH
Strength
WEAK, NORM (normal), STRONG