User Manual

❶ Sorting order reference node selection pull-down menu
Selects the Yamaha switch that you want to appear at the top of the tree view. These are
shown in their connection order relative to the selected Yamaha switch.

NOTE
• Only the Yamaha switch for the current network will appear in the
sorting order reference node selection pull-down menu.
• When starting Yamaha LAN Monitor, the Yamaha switch closest to the
computer will serve as the starting point for the tree view.
❷ Tree view
This area shows the Yamaha switch, and Dante-enabled devices detected by Yamaha LAN
Monitor.
If a device that was saved in the snapshot is no longer found, or if the connection port is
different, a red error icon ( ) is shown for the agent that is above the corresponding device. If
a device that was not saved previously is newly found, a blue notification icon ( ) appears on
the agent that is above the corresponding device.
9.3. “Connected Devices” view
When you click a Yamaha switch shown in the tree view, a list of the connected devices is shown in the
“Connected Devices” view.
The “Connected Devices” view is updated each time that the time specified in “Information update
interval of the selected agent” - “Status of each function” of “Basic Settings” has elapsed.
When you click the [Refresh] button of the “Connected Devices” view, information for the devices
connected to the agent is refreshed.
❶ “Update Time:”
Shows the date and time at which information was last captured for the devices that are
connected to the Yamaha switch or Yamaha wireless LAN access point that is selected in the
“Tree” view.
❷ List
Shows a list of information for the devices that are connected to the agent that is selected in
the “Tree” view.
Depending on the device, some items will not be shown. Click the title row to sort according to
the item clicked.
“Port” Shows the port number of the agent to which the device is connected.
The switch port numbers that support the stack function are displayed
in the format “[Stack ID].[Port number]”. If a Dante device has
multiple logical ports for a single physical port, they are all shown with
the same port number. On Yamaha Dante-enabled devices, there is no
need to pay particular attention to non-Dante ports.
9. Map screen
Yamaha LAN Monitor for Mac User Guide | 35