User Manual

[Keepalive] Select this check box to perform keepalive checks on the device. If this
check box is selected, Yamaha LAN Monitor pings the device to perform
keepalive checks according to settings configured in the “Basic
Settings” dialog box.
Selecting this check box will display the following depending on the
circumstances.
• Checking: Now checking.
• UP: Successfully detected device.
• DOWN: Failed to detect device.
[Power supply
interruption]
Restart devices directly connected to the PoE-enabled Yamaha switch
by turning the power supply on and off.
The duration of power supply interruption is set in the “Basic Settings”
dialog box by configuring the “Power supply interruption time”.
• [Auto] check box: Select this check box to temporarily turn off
the power supply to devices that could not be detected using
[Keepalive]. This setting is only available when the [Keepalive]
check box is selected.
• [Execute] button: This manually interrupts the power supply.
While off, a “Stopped” message will appear.

NOTE
• If multiple Dante-enabled devices are connected in a daisy-chain, the
other devices are also shown together at the same port number as the
device that is connected immediately below the switch.
• Of the settings in the above list, the settings of “Device Type”, [Device
Label], [Model name], [Manufacturer], [Keepalive], [Power supply
interruption] and [Destination URL] can be moved to another computer
by using the [Setup] menu commands [Export Label Settings] and
[Import Label Settings].
Note that the “Label Settings file” generated by this software version
cannot be imported to the software version 1.3.6 or earlier.
• Note that a snapshot notification will not be provided even if the
keepalive status changes from “UP” to “DOWN.”
List entry
To enter information in a list, or edit entered information, double click a cell.
Entries up to the following character counts and within the following ranges are
permitted.
• [Device Label], [Model name], [Comment], [Manufacturer] : Up to 128 characters
• [Power consumption (W)] : Up to the first decimal place within a range of 0.0 – 90.0

NOTE
Content entered into the [Device Label] and [Comment] fields are
shared with “Device Settings” dialog box. Changing entries in one will
change the corresponding entry for the other.
Show connection status
A snapshot saves the connected state of the devices at the time that you started
9. Map screen
Yamaha LAN Monitor for Mac User Guide | 37