User Manual

■ "Paging" component editor (MTX5-D only)
In this screen you can make settings for the PGM1 paging station microphone.
Paging refers to the function of broadcasting an announcement.
For the workflow of making settings, refer to the “MTX Setup Manual.”
The SD messages referred to here are standard-format announcements saved on the SD card of the MTX.
① Paging[ON] button
Turns the paging function on/off.
② [ZONE GROUP] button
The "ZONE GROUP" editor opens when this is clicked.
③ [Settings] button
The "PGM1/PGX1" editor opens when this is clicked.
④ PAGING SOURCE settings area
•
Indicator
This is lit if there is a currently-broadcasting PGM1 or SD.
•
Channel list box
Selects the paging source. Select the input channel to which a PGM1 or SD is connected. Specify 1st Mic
for the input channel of the PGM1 that is specified as 1st Priority.
⑤ ZONE area
•
Indicator
This is lit if there is a zone that is currently broadcasting using a PGM1 or SD message.
⑥ GAIN setting area
Each knob resets to the default value if you click it while holding down the <Alt> key.
In this area, you can make settings related to the line shown in green in the flow depicted below.
14. Audio Processors : MTX5-D/MTX3
ProVisionaire Design User Guide | 225