User Manual

Example 3) A paging system using the PGM1
MRX Setup Manual
165
7.
In the Link Master editor’s combo box, choose [Absolute].
8.
In Source Mix (Spin Area), double-click “Fader(4).”
The “Fader(4)” component editor opens.
9.
Operate the fader in the Link Master editor, and verify that the faders of channels 3 and 4 in
the “Fader(4)” component editor are linked.
10.
Click the [×] buttons located in the upper right of the Link Master editor and the “Fader(4)”
component editor to close the editor and the component editor.
Repeat steps 2 through 10 to create the following parameter link groups.
This completes parameter link group settings.
Parameter link group name Component Parameter
Setting of the Link Master
editor’s combo box
Spin Area BGM ON [Source Mix (Spin Area)] → [Fader(4)]
Ch03:On
Equal
Ch04:On
Spin Area Master LEVEL [Output Ch. (Spin Area)] → [Fader(14)]
Ch01:Level
Absolute
Ch02:Level
Spin Area Master ON [Output Ch. (Spin Area)] → [Fader(14)]
Ch01:On
Equal
Ch02:On
Studio A BGM LEVEL [Source Mix (Studio A)] → [Fader(2)]
Ch03:Level
Absolute
Ch04:Level
Studio A BGM ON [Source Mix (Studio A)] → [Fader(2)]
Ch03:On
Equal
Ch04:On
Studio A Master LEVEL [Output Ch. (Studio A)] → [Fader(12)]
Ch01:Level
Absolute
Ch02:Level
Studio A Master ON [Output Ch. (Studio A)] → [Fader(12)]
Ch01:On
Equal
Ch02:On
Studio B BGM LEVEL [Source Mix (Studio B)] → [Fader(3)]
Ch03:Level
Absolute
Ch04:Level
Studio B BGM ON [Source Mix (Studio B)] → [Fader(3)]
Ch03:On
Equal
Ch04:On
Studio B Master LEVEL [Output Ch. (Studio B] → [Fader(13)]
Ch01:Level
Absolute
Ch02:Level
Studio B Master ON [Output Ch. (Studio B)] → [Fader(13)]
Ch01:On
Equal
Ch02:On