User Manual

“DCA” screen Chapter 4. System screen
MTX-MRX Editor User Guide
110
“DCA” screen
In this screen you can adjust the levels and mute settings of multiple channels.
In this screen, input channels can be assigned to eight DCA groups and eight mute groups, and zone
outputs can be assigned to eight DCA groups and eight mute groups.
DCA groups allow you to use a single fader to control the input levels or output levels of multiple
channels. Mute groups allow you to switch multiple channels on/off together.
Fader settings for DCA groups and [MUTE] group master button settings for mute groups are
shared by MTX units within the same MTX/MRX system. For example if you make these settings
for the MTX3 whose ID=1, they will automatically be applied to MTX3 units of other ID numbers.
This is not shared with MRX units.
1 [INPUT CH DCA] button
This button selects input channel DCA groups.
2 [INPUT CH MUTE] button
This button selects input channel mute groups.
3 [ZONE OUT DCA] button
This button selects zone output DCA groups.
4 [ZONE OUT MUTE] button
This button selects zone output mute groups.
1
2
3
4
8
6 7
1